An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has answered 200 questions.
An expert whose answer got voted for 20 times.
Re: FLM 2632 WILL NOT POWER ON
Problem here is the wont sell just the power supply, it comes with what is called the control box assembly. Part # 909-KS0-GF271XAH On factory bakorder and no ETA and for $ 431.85 at www.vancebaldwin.com
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your power supply board needs to be REPAIRED not REPLACED, replacing the board will just make the problem happen again in two years or less, if you can use a screwdriver you can send me the board and I will repair it for less than it would cost you to do it yourself ($50) with the correct components. Email for further instructions!
Cory Schindler firstname.lastname@example.org
You, re right, the problem is most likely in a power supply. I have a similar set myself, had the same issue. You can't get a separate supply for the set, only whole system module, what plugs in into the main unit. Too bad, it cost around $450 new, so look at discount used parts on line and find a used working power supply. Good luck, Alex's TV Service, Philadelpiha,Pa, 215-806-5980.
Either one of two problems, the main power supply has an issue or has gone bad. 'Not supplying the correct voltages to your processing/controlling board' or that you are having problems with your processing/controlling board. My guess is the main power supply board. A Good TV Service Shop would give you an idea of what the cost of repair should be. Call around. Blessing, A/V Media Tech Guy
If it's still under warranty the TV Service Shop will fix it for free if they are a qualified Polaroid servicer. If not I believe you are having problems with the power supply board not sending the Audio board the right voltage. Could be the Audio board itself. A Good TV Service Shop should be able to fix it. May cost you between $100 to 200 for the repair. Blessings, A/V Media Tech Guy