Question about Technics SL-1210M5G Turntable

2 Answers

Technics sl 1210 mk5 g's

How do the lids fix on

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replace your back plates on the rear of the turntable with the block brackets you are suplied repeat process on both sides.

Remove the rubber blocks from the rear of your dustlid
attach the other two bracket arms onto the lid, repeat both sides
now the lid can be inserted into the back of the turntable you may use it as you wish !!!

heres a link for the one hinge i will try and post the other link soon !!!

http://www.ftav.co.uk/shop/index.php?main_page=product_info&cPath=3_7&products_id=49&zenid=d1b40a4569378b4dd22222991f9e48e5

Posted on May 31, 2008

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Instructions for putting the lids can be found here:

http://www.1200s.com/Service/Tech/faq.html

FYI, the dust covers on this model do not come with hinges. So, you'll have to purchase them separately.

- TERMiNAL OPTiC
www.DJPROLAB.com

Posted on Apr 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had to replace the tonearm in a technics 1210 mk5, and i cut one of the wires too short, and i wanted to know where can i get the internal wires that connect from the needle to the circuit board, (the...


Depends where in the world you live. If in the USA Radioshack, should have something to do the job. And in the UK Maplins have a good range of cables.

Jan 27, 2010 | Technics SL-1210 Turntable

1 Answer

He doesn't start anymore


I'm havin the same problem,
did u manage to work out what the fix is?

Dec 20, 2009 | Panasonic Technics SL-1210MK2 Turntable

1 Answer

Pitch problems


You would need to calibrate them to each other. Not very difficult, but not that easy either.

I would suggest taking it to a service center, and ask them to calibrate the turntables to each other. It's a matter of adjusting VR302, which is located underneath the turntable platter. You'll also need a frequency counter or similar - which aren't cheap.

- OPTiC

Technics Repair Videos
Technics DJ Repair
Technics Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Mar 15, 2009 | Technics SL-1210M5G Turntable

1 Answer

Tone arm replacement


Any TV repair shop will be able to perform that repair for you as well as get any parts necessary. Steve Medley

Feb 07, 2009 | Technics SL-1210MK5 Turntable

1 Answer

Modification to SL-1210 Mk5


so what does the turntable do at 0?

May 30, 2008 | Technics SL-1200MK5 Turntable

1 Answer

Pitch problem


check it.

http://www.repairnyc.com/

These guys are authorized technics service.

Jan 05, 2008 | Technics SL-1210 Turntable

1 Answer

Problem with pitch on my technics


You may have to recalibrate the motor. These guys are pros.

http://www.repairnyc.com/

Check em out.

Jan 05, 2008 | Technics SL-1210 Turntable

1 Answer

Technic turntable SL-101


http://1200s.com/Store/PARTS-TECHNICS-TURNTABLES/c271_272_278/index.html

These guys are pros.

Nov 07, 2007 | Technics SL-1210 Turntable

1 Answer

Torque Problem


They actually need to be "broken in". The mk5 uses a different pitch board, allowing you to reverse, pitch up and down to 16, and lock and unlock the quartz. The mk5 is more precise, so its also more sensitive. Notice the notches on the turntable shaft behind the tonearm weight. The mk5  is just make to be finer calibrated.....your decks are fine, and more so probably your mk2s as well.

Oh and also, the infinite lubrication used on technics that was developed in the 70s is no match for the formula developed in the late 90s. Slick!!

Sep 30, 2007 | Technics SL-1210M5G Turntable

Not finding what you are looking for?
Technics SL-1210M5G Turntable Logo

Related Topics:

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Technics Turntables Experts

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

411 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

Are you a Technics Turntable Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...