Question about Bose Acoustimass 15 System

3 Answers

Acoustimass 9 input is din plug what wires go to what pin ?

Posted by on

  • shagalo Oct 11, 2008

    I need configuration of the wire that connects to the system

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 10 Answers

Acoustimass 10 IV cable

acoustimass 9 - 0ccc7c6.jpg

Posted on Mar 22, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 45 Answers

Your description of the problem I have not understood could u be more descriptive or post a photograph

Posted on Mar 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Bose powered acoustimass 9 speaker system i want know input is din plug what wire go to audio in put and power wire

Posted on Jun 18, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need wiring diagram Bose audio input cable


Bose is proprietary. You need to either order it from them or Get a meter or continuity tester and write down the pinouts and make your own.

May 11, 2013 | Bose acoustimass 5 series II Speaker

1 Answer

Bose woofer acoustimass 20


Have a acoustimas 20 woofer. Since it is the only thing I have I tried to custom connect it to a source (my mp3 player) to get a signal. It all worked fine by soldering the wire terminals straight to the pins of the DIN. All worked fine until I turned up the volume on walman and maxed out the 2 settings on the woofer, The woofer died after that. I am trying to find what could have gone wrong, any help would be greatly appreciated.

Aug 06, 2012 | Bose Acoustimass 20 System

1 Answer

Need new system input cable for acoustimass 10


I've made a diagram of my serial cable. You can easily make one with some speaker wire and a 15-pin d-type female serial connector. Solder the wires as shown in the diagram.

6ac4306.jpg

Jan 26, 2010 | Bose Acoustimass 10 III System

2 Answers

Bose audio input receiver cable 15 pin


You can buy it on ebay but it's cheaper just to make one. If you can solder, all you need is a female 15-pin d-type connector and a bunch of speaker wire. Here is a diagram of the connections.

eef34d9.jpg

3_15_2013_4_16_30_am.jpg

Jun 24, 2009 | Bose Acoustimass 10 III System

1 Answer

Need longer ribbon speaker wire for Acoustimass 16


I have the same question. I just called Bose at 1-877-210-3782 (prompt 6) and they have two solutions:

1. 20 foot Input extension - $25
2. Input adaptor - $12 (you can run your own speaker cable to the input adaptor)

Apr 10, 2009 | Bose Acoustimass 16 System

1 Answer

How to make a 15 pin female sound in cable


Ya, here is a diagram I made of my Acoustimass 10 IV input cable. All you need is a female 15-pin d-type connector and a bunch of speaker cable (also one RCA connector for sub connection). Here's my diagram:

628d111.jpg

Mar 10, 2009 | Bose Acoustimass 10 III System

1 Answer

My sound in cable was missplase and can i make it my self and pls any body can send me the cable structre. pls...........


Here's a diagram of the 15-pin serial input cable that came with my Acoustimass 10 IV system. You just need a 15-pin female d-type connector, one RCA connector and a lot of speaker wire. Here's my diagram:

ef142c2.jpg

Mar 10, 2009 | Bose Acoustimass 10 III System

3 Answers

Looking for a control pod.


I recently had a similar problem. In my case the left speaker had no sound. Finally traced the problem to a broken wire inside the control pod plug, which I destroyed by dissecting it. For those who have the experience, or know someone who does, purchase a new plug, which a Mini DIN 8 pin (RS-422 standard). It should be available at any good electronic parts store. Solder new plug on to cable, which requires a fine electronic soldering iron and a fair bit of skill (the wires are very fine).

Look at the plug (from the rear); you will see it comprises a top row of 3 pins equaly spaced; a middle row of 3 pins (there is room for 4 pins but one pin is missing just left of centre); a bottom row of 2 pins. I numbered these as follows:

8 o 7 o 6 o

5 o 4 o 3 o

2 o 1 o

The wire from the controller comprises 8 coloured cores and a bare core. The wiring of the eight cores are as follows:
DIN CORE PCB
pin 8 - brown 8
pin 7 - red 7
pin 6 - orange 6
pin 5 - yellow 5
pin 4 - green 4
pin 3 - blue 3
pin 2 - white 2
pin 1 - black 9
body clamp - bare wire - G

In case your coloured cores vary from mine I have also listed the pin each one goes to on the printed circuit board plug, which will let you identify the colours.

Oct 11, 2007 | Level 9 Sound Designs Monsoon Planar Media...

1 Answer

Bose Acoustimass 8 pin Cable


Bose Lifestyle 3 or 5 not sure which. DIN 8 pin to 2 RCA's

Sep 11, 2007 | Bose Acoustimass 10 III System

Not finding what you are looking for?
Bose Acoustimass 15 System Logo

1,670 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Speakers & Subwoofers Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Bose Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...