Question about Polaroid FLM-2601 Television

1 Answer

Audio comes on but not video.

When I turn on TV only audio comes on. Have to shut off and turn on again, sometimes 2 or 3 times.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Unfortunately, i have the same problem but i found out that it's natural for the flat panel's to do that especially if you are using the hdmi input... wait 10secs b4 turning it on again.. it's bc if using the hdmi input, it takes a sec to change it's signal over and sometimes it blanks out and only audio comes in..

if you still have a warranty on it, contact them to confirm it's not something else going on.. my cable guy helped me with that ? and more since we are new to flat panels.. i hope this helps..
d

Posted on Feb 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fault F96kHz


turn the audio down from the TV seems as if its overdriven, disconnect speakers , if no clicking, you have a speaker problem

Mar 04, 2014 | Kenwood Audio Players & Recorders

1 Answer

When changing channels sometimes I lose audio


Are you using a cable or sat box. if so I would suspect that device. If your are using the tuner in the tv rescan for channels. be sure you have antenna selected. If problem still occurs replaced the main board .

Jan 06, 2014 | Vizio E390-A1 39" LED TV 1920x1080, 60 Hz,...

1 Answer

How to I change the video input? i.e. I got a digital TV box and need to put it to video input 1. How?


  • On the back of your TV are all your inputs/outputs.
  • On the far left is your Video 1 Input.
  • The top input is your Video (Yellow AV cord)
  • The middle input is your Left Audio (White AV Cord)
  • The bottom input port is for your right Audio (Red AV Cable)
  • After you have all the AV cord up as I have explained then push the "TV/Video" button on the remote until "Video 1" appears on the screen.
  • In the event you should want to use Video 2 sometime then hook the cords up the same way except in the Audio 2 port in the back of the TV.
  • Each time you press the "TV/Audio" button you will cycle through the Inputs until you come back around to TV.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jul 13, 2011 | Panasonic CT-32SL13 32" TV

1 Answer

Audio on some TV channels/shows goes off. It varies by channel, sometimes national feed is silent, but local break-ins have sound. I have to set the Audio from A.F.D. to Movie to get audio. Sometimes I...


Not sure what this means: "The audio comes to the Cable box through coax cable." From where does audio come TO the cable box? The cable box is a source of both audio and video. Perhaps you mean the TV broadcast "containing the audio and video" comes in on coax.

Has this ever worked correctly? <<<<<<<<<<<<<<<<<<<<<<<<

Try this: disconnect the HDMI that goes from the cable box to the Video 2 on the receiver. Leave the optical audio cable in. How's the audio now?

Then try the reverse: reconnect the HDMI and disconnect the optical audio. You shouldn't need BOTH for audio into the receiver.

Now what happens?

Feb 17, 2010 | Sony STR-DG510 Receiver

1 Answer

Pioneer VSX-D509S keeps shutting off


Aside from any intrinsic problem with your receiver, the usual suspects are;
1) Poor receiver ventilation. 2) Very high levels of bass. 3) Shorts in the speaker wiring. 4) A rubbing loudspeaker voice coil.

Sep 20, 2009 | Pioneer VSX-D509S Receiver

1 Answer

Audio Problems 42" LCD Toshiba


reprogram the tv- auto scan will synch video and audio

Aug 22, 2009 | Televison & Video

1 Answer

Tv wont turn on get audio then tv shuts off timer lite blinking


If TV stays in stand by with audio but no video, then common faults are the ballast board, or a fault on digital board.

If the led stays blinking , and tv turns off then the TV is on protect mode.

Try first leaving the TV power cord unplugged for some times, let say one hour or so.

Also ensure that the fault is not coming from a faulty receiver box sending bad signal, check if you get same problem with no receiver box or dvd connected.

If that does not work, and you keep having a flashing led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible reasons.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , startingthe flashing light.


If you are in situation one, then theTV will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occur are a blown capacitor on power board, a convergence IC has blown, or a fault on Digital board.

Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.


If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

Dec 21, 2008 | Mitsubishi WD-62531 Projection Television

1 Answer

I have audio but no video...


Deflection Board resolder all Pinns on (FBT) Flyback Transfomer.

Nov 02, 2008 | RCA D52W23 52" HDTV CRT TV

1 Answer

Sony Grand Wega KF50WE610 Video/Audio disappears every 1-2mins


Hello apharcha,
99.99% its the lamp. You may also have a faulty door, but thats kinda just 2% possibility. Change the lamp...its due anyway.
List Price $200.00
Part Number A-1606-034-B Description LAMP BLOCK XL2100U
65dc0a9.jpg
Best regards
circuitcity

Jun 08, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

RCA F36689 with Chassis CTC197CR


HI, MY MAME IS vICTOR FROM COSTA RICA. YOU NEED A TV TECHNICIAN BECAUSE YOU HAVE SOME PROBLEMS WITH THE ELECTRONICS CIRCUITOS INCE. I HAVE THE SAME TV, AND I FIXED 2 MONTH AGO, THE PROBLEM MAY BE IS THE FLYBACK, THE PUSH BUTTON PANEL. DO NOT USE AEROSOL, BECAUSE CAUSE MORE PROBLEMS INCIDE

Aug 12, 2007 | RCA F36685 36" TV

Not finding what you are looking for?
Polaroid FLM-2601 Television Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

73150 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...