Question about Audio Players & Recorders
How do I change the language on a Grundig Sonoclock 500 from German to English
See solution below:
1. Turn off the printer.
2. Press 'select' and turn on the printer. (select button should be pressed while turning it on)
3. press '-value+' to choose your language
4. press 'select' to save
5. press 'go' to return to ready mode.
Posted on Oct 21, 2008
Power on your printer. Press the menu of your printer then sect the arrow down or up to select the language menu. press ok if u have seen language then go to option select from german to english.
Please rate the solution after you have tried it so that I can assess you more on this problem.
Posted on Dec 11, 2008
First of all the language was Finnish and not German.
I managed to get a translation from Finnish to english for the word
Then i went to the system menu and selected kieli, then englanninkieli
then pressed enter, this changed the language to english.
I did not have to do a factory reset.
Thank you for your trouble.
Posted on Apr 14, 2009
If you are talking about one of the Casio QT6xxx's then you need to.
I . All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
*In case of wire inline:
3. Connect all terminals by inline.
*In case of wireless inline: QT 6000 or QT6600 models
3. Connect Wireless LAN card.
4. Turn on all peripheral devices of a terminal.
5. Turn on this terminal while pressing and holding the initialize switch and then release.
6. Next the screen will say push the INIT (initialize) switch to start IPL.
After releasing the key
The IPL will take a few minutes to copy over.
When it is done, Pick the Language you need. enter"20000" (U.S.)," l0000" (other area:English)," 40000"
(other area:German)," 50000" (other area: French)," 60000" (other area: Spanish) and
press the <OK> key.
I will be making a video of this procedure this week, so visit us @ www.casiohelp.com to view it.
Posted on Jul 26, 2009
SOURCE: language change
You can change the language that displays in the screens and menus of your device. To change the display language, perform the following steps: 1. Press the Left Softkey to select Start. 2. Select Settings and then Regional Settings. 3. In the Language field, use the Navigation key to select your language. 4. To save the setting, press the Left Softkey to select Done. You must turn your device off and on again for the change to take effect.
Posted on Sep 02, 2009
Tips for a great answer:
Dec 28, 2015 | Amazon Fire TV Stick
Jul 20, 2012 | Acer Aspire Computers & Internet
Sep 21, 2010 | T-Mobile MDA III Pocket PC
Jun 22, 2009 | HTC P4350 Smartphone
Apr 12, 2009 | Navman Tracker 5500i GPS Receiver
Dec 26, 2008 | ASUS Eee 4G Notebook
Sep 10, 2008 | HP LaserJet 4000 Printer
Aug 06, 2008 | Nortel Meridian M3820 Corded Phone
Dec 23, 2007 | Nintendo DS Lite Console
Sep 05, 2005 | Casio Cassiopeia EM-500 Pocket PC
457 people viewed this question
Usually answered in minutes!