Question about Televison & Video

3 Answers

Hi I need to unlock my Sanyo DVD player HV-DX350A

Hi I got a Vegetales DVD for my kids but cant play it. I am told as it is a region 1 disc it cant be played in New Zealand unless we get a code to "unlock" my player. It is a Sanyo HV-DX350A. Can anyone help me with this ? Thanks

Posted by on

  • mattgemma Dec 26, 2008

    these codes dont seem to work onmy machine. any other options besides getting a new one?

  • bennydajeta Jan 08, 2009

    Same prob but the solution from mocca worked for me thanx!!

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

HI this works as i have unlocked my own Sanyo HV-DX350A player with it Hope it works for you


Unlock region code for Sanyo HV-DX350A DVD/Video player.
1. Turn on unit
2. Select DVD
3. Open tray
4. Press 0520 then in sequence press arrow up, down, left and right.
5. The region management screen is displayed on your monitor ( Code is displayed on the unit LCD display).
6. Note - Your current EEPROM region code setting is displayed on the screen.
7. Enter desired Region Code ( 0 for multi region).
8. Press PAUSE to exit.
9. Turn power off and turn on again.

If you repeat steps 1 to 4, you can view your new setting.

Posted on Mar 10, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a Sanyo HV-DX350A DVD/Video player.  I followed Moccacoffee's instructions almost precisely, except for step 8 where I closed the dvd drawer instead.  AND IT WORKED.  Just a word of difference though.  There was no indication on the LCD panel on the unit that anything had happened, but when I tried to play a previously locked DVD it worked perfectly.  SO DON'T DESPAIR IF NOTHING SEEMS TO HAPPEN.
The steps: 1. Turn on unit
2. Select DVD
3. Open tray
4. Press 0520 then in sequence press arrow up, down, left and right.

5. Press 0 for multi-regoion (or the number for the region you want) 6. Close the tray using the button on the remote.
I hope this helps someone
travelsalone

Posted on Aug 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Solution for HV-DX350A from travelsalone worked first time.....thankyou

Posted on Jul 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a user manual for my sanyo HV-DX3E dvd/vcr combo player


there are only a couple ways you can hook it up and if you took the old tv off then you should have the cables you need

Feb 03, 2015 | Sanyo Televison & Video

2 Answers

I have a panasonic dvd player model no: DMR EX78 I live in south east Melbourne Australia and have purchased a few dvds from Amazon, sometimes I get a message saying something about regions, I spoke to my...


The problem with Amazon DVDs purchased is the region codes each disc may contain. Since a majority of them would be from USA, and their region is 1, your player being region 4 would not support that code.

There is no fault here, it is just a restriction. Some discs work, some don't.

No one likes region restrictions - particularly on DVDs bought legally, and I doubt very much Panasonic would provide any information on unlock codes for you.

Be warned: if you do successfully find a hack to unlock your player so it becomes region-less, expect the risk of either the player failing later, or not reading any discs at all. I am sure there are 'region-free' players around now, which don't contain a restriction and can play ANY DVD any region.

On the other hand, if you have a DVD drive on your PC, and it is set to region 0 or all regions, and the discs play fine in it, but not the player, then you could view those particular discs that way; you do not need to make any copies of any of the DVDs just to watch them.

Mar 02, 2011 | Panasonic Televison & Video

1 Answer

Need to unlock a LG 898 dvd player. i would like it region 0


Converting the player to multi-region (or technically region 0) so that it can play DVDs from anywhere in the world is simple. Just download a file, burn it to a CD, insert into the DVD player and pick the region you want from the on screen menu that comes up. Just google for and follow the instructions for the LG DVD-5000 series players, it is the same hack for the DN898 as the LG DVD-5063 5083 5095 5183 5253 and 6053 and the Sanyo HV-DX1E, HV-DX2E and DVW-7100 and quite a few others.

Mar 14, 2010 | LG DN898 DVD Player

2 Answers

Cant play dvd baught in england. player baught in the usa


There are different region codes for dvds and the player may only be able to play dvds with a north american region code.

Sep 08, 2009 | Radio Shack Accurian LMD-5108A Portable...

11 Answers

I would like to change regions on my portable Durabrand DVD player model PDV-722


Alright, just follow these steps and let me know if you have any problems or questions

  1. Power and switch on the Durabrand DVD player.
  2. Open the DVD disc tray tray or lid.
  3. Press Stop.
  4. Press 3 - 5 - 9 - 7 (3597 in sequence). Can be done on remote control.
  5. Hidden DVD Region menu appears. Select region 0 or 9 using up or down button on remote control
  6. Press OK.
  7. Close the disc tray and press Standby on the DVD player front

Dec 19, 2008 | Televison & Video

1 Answer

Unlock code for Toshiba SD-270EKB


dvd model SD-270EKB
1.power on dvd
2.open disk tray
3.while tray is open press 98790

the last number zero represents all regions unlocked.

Apr 06, 2008 | Televison & Video

2 Answers

Multi region support


Unit is programmed for respective regions and cannot be changed, however, you can also find discs that are "region free" and they will play fine...accordianman

Feb 22, 2008 | Sanyo HV-DX2E DVD Player/VCR

1 Answer

Sanyo Hv-dx350 compatability to Sony Kv141as


is your sony kv1414 a remote control then it is not compatble with ur dvd so try some other remote control

Dec 22, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,063 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6355 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...