Question about Routers

1 Answer

Set up of wireless connection?

I am having Data One connection, I am not able to enter in (192.168.1.1) in order to set up my wireless connection

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Need more info. How are you connected to the router? If you are using ethernet without a router you have to use a crossover cable. Also you have to make sure the IP on your computer is set to the same range as the router. (ex. 192.168.1.2) with the 192.168.1.1 router address and make sure your subnet mask is 255.255.255.0

Posted on Feb 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i set up secured network?


set-secured-wireless-network-netgear-800x800.jpg Set up a Secured Wireless Network on Netgear Photo is inappropriate for this article Submit

A wireless network is comprised of a wireless router, a computer (or other wireless-enabled devices), a high-speed modem, and a subscription to an Internet Service Provider (ISP). Netgear is a popular manufacturer of wireless networking hardware that allows users to set up a secured wireless network. In order to prevent unauthorized users from logging onto your wireless network to gain access the Internet, and in order to protect the data you transmit and receive online, you should change your wireless router's security settings to create a secured wireless network.

1 Install the router. To install a Netgear wireless router, use an Ethernet cable to connect the router to the cable/DSL modem and use another Ethernet cable to connect the router to your computer. Make sure all of these devices are powered off as you connect them. Once connected, turn on the cable/DSL modem, the router, then the computer, in that order. Allow at least two minutes to pass after turning on each device to give the devices time to recognize one another

2 Log in to the router. Open a web browser and type in the router's address to load the router's settings page. The router's address can be found in the user guide or setup CD that came with your router, or you can download a user guide from Netgear's technical support page (see Resources). Most Netgear routers use one of the following addresses: http://192.168.1.1; http://www.routerlogin.net; or http://www.routerlogin.com. Press "Enter" or click "Go" in your web browser after you have entered the address.


3 Enter the router's username and password. A prompt will appear on the screen when you enter your router's address, requiring you to enter a username and password before you can access the router's settings page. The default username for Netgear routers is "username" and the password is "password." Because the textboxes are case-sensitive, you must enter both of these using all lowercase letters. Press "Enter" to log in to the router and begin changing its security settings.

4 Open the security settings menu. The router's home page has multiple links for changing settings. Find and click the "Security Settings" link to change the router's security settings.

5 Change the SSID, choose an encryption setting and create a password. The default name (or "SSID") of your wireless network will be "NETGEAR." Enter a new, memorable name for your wireless network to help detract would-be hackers from trying to access your router, as most novice computer users with unsecure networks do not know how to change the default network name or institute any other security features. Newer Netgear routers offer WPA or WPA-PSK encryption to secure your network, both of which provide high levels of security. Select either of these. encryption types and create a unique password. This will require all users to enter the password before they can log in to your wireless network. It is important that you create a complex password that has several characters, including numbers. Once you have created a password, click "Confirm Password" to save it. To exit the security settings menu and log off of the router, click "Save" or "Apply" to save the changes you made, then click "Logout" to exit the route



Things You'll Need

* Netgear wireless router
* High-speed Internet service provider (e.g., Comcast, AT&T, Insight)
* Cable/DSL modem
* 2 Ethernet cables
* Computer
* Web browser
* Router address
* Router's username and password

Good Luck : ) ....

Oct 14, 2011 | NetGear WGR614 Wireless Router

1 Answer

How will I set up a password on my router to avoid neighbor use my internet?


I would recommend that you connect to the router via a cable to complete the following set up, otherwise you will lose wireless connection during the process and this complicates things and takes longer.


1 Open a web Browser and type 192.168.2.1 in the web address bar and press "Enter".


2 In the newly opened Authentication box type in the user name and password. The default is Username admin Password 1234. Click the OK button.


3 Click the General Setup Button.


4 Click the Wireless Button.


5 Ensure that wireless is enabled at the top of the box and select the security settings option and click next.


6 In the WDS security settings Box set the dropdown to WPA pre-share key.


7 Select WPA (TKIP) and Passphrase


8 enter your phrase in the pre-share key box and click apply


9 when connecting wirelessly you will be asked for your passphrase in order to connect.


You are now secure.


Jul 04, 2011 | Edimax BR-6226n nLite Wireless Broadband...

1 Answer

Heyy guys just wanting to hook my DS lite to the wifi but i need to add it to the network with the mac adress and whats a wep key


> WEP

Wired Equivalent Protocol is a method of encrypting "over-the-airwaves" transmission of data from one wireless device (your DS-LITE) to another wireless device (your router).

You need to connect a computer to the router, and then configure the "wireless networking" part of your router:
* set an SSID (the name of your network)
* set an encryption level (use 'WPA', not 'WEP')
* set a password

Enter the SSID and the password onto your DS-LITE, to make the wireless connection.

Jan 11, 2011 | Routers

1 Answer

I would like to have the highest level of security on my home network, so my wireless router is set up with MAC filtering on, and the network is "invisible." I have entered the MAC address for my...


The problem you are having is that on your computer you need to set the wireless network to "connect even when network is not broadcasting"

Setting the network to invisible stops the router broadcasting the SSID (Name of the network). If your computer is only looking for SSIDs that are being broadcast it will not connect to the network when you set it to invisible.

Dec 18, 2010 | Routers

1 Answer

Our router is visible for others and everyone has free access! how to block this router for others?(network is unprotected now without any password or whatever). Thanks in advance. E


  • Please follow the below instructions to protect your device:


  • Connect your computer to the router using a network cable, or you can connect to the router through a wireless connection. Note that your wireless card in your computer must be enabled.
  • Open your Web browser. Enter: http://192.168.1.1 in the address field. This is an internal IP address to access your router. Press the Enter Key.
  • When the password request appears leave the user name field blank. By default, the password is admin.
  • After logging in, you are not required to change the default administrative password. However, it's fully recommended that you change the default password by clicking on the Administration tab and Management. Enter a new password in the Password field and again in the Re-enter field to confirm.
  • I recommend setting the Remote Management item as Disable. It will be another layer of security for your router. With this configuration you can only access your router for programming using a standard Ethernet network cabling.
  • To save the new password, click Save Settings at the bottom of the page.
  • To avoid intruders accessing your wireless connection we'll start to work with the Wireless tab.
  • In the Basic Wireless Settings enter a name for your wireless network connection in the Wireless Network Name (SSID). Set the Wireless Broadcast to Disable.
  • When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router if the Broadcast is enabled. Do not broadcast the Router SSID. It must be Disabled.


  • Note that your SSID should be set following similar rules for setting a password, e.g. at least 8 characters, a combination of letters, numbers and non consecutive characters.


  • Disabling the SSID broadcast is not a strong security setting, but it can help prevent intruders from sharing your WLAN. Remember to save your settings.


  • Enable network authentication and encryption. Listed in order strongest to weakest:

WPA2-PSK (data encryption TKIP or AES)

WPA-PSK (data encryption TKIP or AES)

WEP (256 Bit) - Weak, but better than no encryption

WEP (128 Bit) - Weaker, but better than no encryption

WEP (64 Bit) - Weakest, but better than no encryption



plz do rate the solution if got help

Nov 23, 2010 | Linksys Wireless-G Broadband Router

2 Answers

Dell axim x51 will connect to to wifi hotspot i need detailed instructions to get it to work


Hi, follow the steps found in your owners manual. That can be downloaded at this link.
http://support.dell.com/support/edocs/systems/aximx51/en/om/om_en.pdf

Using Wi-Fi (802.11b)
Wi-Fi provides your device access to WLAN (Wireless Local Area Network.)
Short for wireless fidelity, Wi-Fi refers to any type of 802.11 network,
whether 802.11b, 802.11a, or dual-band. Wi-Fi certified products from
different manufacturers are interoperable.
NOTE: Mid and High configurations of the Axim have Wi-Fi 802.11b built in and the
drivers factory installed. For a Low configuration device, you must purchase the
802.11b SD card, insert it in your device, and load the drivers.
NOTE: The default Wireless Networking Client utility for your device is the
Dell WLAN utility. The following configuration steps are for the Dell WLAN utility.
Configure wireless networking for your device in one of the following
scenarios:
• Network Card is set up
• Wireless Network is broadcasting SSID
• Wireless Network is not broadcasting SSID
If the Network Card is Set Up
Normally the internal wireless card is already set up. There are times when
you must choose the network card. On the Axim X51/X51v configurations
that have built-in wireless, the network card is associated with the enabled
wireless. If wireless is not enabled or you are using a socket card for
wireless connection, then choose the network card:
1 Tap Start → Settings → Connections.
2 Tap Network Cards.
3 Choose either Internet or Work from the menu.
4 Choose the network card to connect to the network. For the
Axim X51/X51v with built-in wireless, choose Dell Axim X51/X51v
WLAN Wireless Adapter.
5 Choose whether the network card assigns an IP address or receives an
IP address automatically.
6 Enter the Server IP addresses if required and tap OK.
If the Wireless Network is Broadcasting SSID
1 Press the wireless button to enable wireless capability. The green LED
in the right top corner of the device indicates that the wireless
is functional.
2 Tap Start → Settings → Connections.
3 To add, edit, or delete a profile, select the corresponding action and
tap Network Cards.
4 In the Configure Wireless Networks window, select one of the available
network names and tap OK.

If the Wireless Network is Not Broadcasting SSID
The Configure Wireless Networks window only shows wireless networks
that broadcast a Network Name (SSID) and those that have been added.
Add the network if it is not listed. Contact your network administrator for
the following information:
• SSID (network name)
• Authentication
• Data Encryption
• Keys (if the key is not provided automatically)
• Log in if necessary
To configure the wireless network:
1 From the Configure Wireless Networks window, tap Add New.
2 Provide the Network Name (SSID).
3 Select either Internet or Work in the Connects To box.
• Selecting Internet allows you to connect to your network but you
will have to manually start a VPN connection, if needed.
• Selecting Work automatically starts a VPN connection any time
you connect to the network.
• If you are having trouble connecting to your network, change the
Connects To box to Internet.
4 Tap the Network Key tab.
5 Enter the Authentication and Data Encryption information. If a key is
required, enter the network key.
6 Select the 802.1x tab.
7 The Authentication and Data Encryption chosen on the previous
screen determines whether this screen is available. If available choose
the EAP type used on the network.
8 Tap OK.
9 If more than one network is listed, tap and hold the stylus on the
network name you want to connect to. A pop-up menu appears.
Tap Connect. After a few seconds you should see Connected next to
the wireless network you selected.
Thank you,
lee

Mar 09, 2010 | Routers

1 Answer

We do not have a secure connection to our wireless rotor


You could change and configure your router through its web interface. To access it, use http://192.168.1.1 on Internet Explorer, and enter 'admin' for the password.
  • Go to Wireless LAN Security tab.
  • Select WPA-PSK on Network Authentication.
  • Enter a password that you want for your wireless network on WPA Pre-Shared Key (minimum characters is 8).
  • Set Data Encryption to TKIP.
  • Apply settings.
You should now reconnect your wireless computers to your network and enter the WPA Pre-Shared Key.

Oct 12, 2009 | Airlink 802.11G Wireless 4-Port Router...

2 Answers

Connecting issues with wireless mode on WRT54G2


  1. Try to disable WEP in the router and check if the wireless computer will be able to connect to the router and Internet.
  2. Then enable WEP again. If the same problem happens, upgrade the firmware of your router.
  3. Click on the link for the lastest firmware available for your router.
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1175242897803&pagename=Linksys%2FCommon%2FVisitorWrapper&displaypage=nodata#versiondetail

Hope this helps!

Nov 10, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

PS3 Wireless issues


Network settings vary depending on the network environment and the devices in use. The following procedure describes a typical setup when connecting to the Internet using an Ethernet cable.

1. Connect an Ethernet cable to the PS3™ system.
2. Select (Network Settings) under (Settings) in the home menu.

3. Select [Internet Connection Settings].

Select [Yes] when a confirmation screen is displayed stating that you will be disconnected from the Internet.

4. Select [Easy].

After you confirm the network configuration, a list of settings will be displayed.

Depending on the network environment , additional settings for PPPoE, proxy server or IP address may be required. For details on these settings, refer to the information from your Internet service provider or the instructions supplied with the network device.

5. Save your settings.
6. Test the connection.

If you select [Test Connection], the system will attempt to connect to the Internet.

7. Confirm the connection test results.

If a successful connection has been made, information on the network will be displayed.


Internet Connection Settings (wireless connection)
This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.

Set the method for connecting the system to the Internet. Internet connection settings vary depending on the network environment and the devices in use. The following procedure describes a typical setup when connecting to the Internet wirelessly.

1. Check that the settings for the access point have been completed.
Check that there is an access point connected to a network with Internet service near the system. Settings for the access point are typically set using a PC. For details, contact the person who set up or maintains the access point.

2. Confirm that an Ethernet cable is not connected to the PS3™ system.
3. Select (Network Settings) under (Settings) in the home menu.

4. Select [Internet Connection Settings].

Select [Yes] when a confirmation screen is displayed stating that you will be disconnected from the Internet.

5. Select [Easy].


6. Select [Wireless].


7. Select [Scan].

A list of access points within the range of the PS3™ system is displayed.

Depending on the model of PS3™ system in use, you may have the option [Automatic]. Select [Automatic] when using an access point that supports automatic setup. If you follow the on-screen instructions, the necessary settings will be completed automatically. For information on access points that support automatic setup, contact your local retailer.


8. Select the access point that you want to use.

An "SSID" is an identification name assigned to an access point. If you do not know which SSID you should use or if an SSID is not displayed, contact the person who set up or maintains the access point for assistance.


9. Check the SSID for the access point.
10.Select the security settings that you want to use.
The types of security settings vary depending on the access point. Contact the person who set up or maintains the access point for information on which setting to select.


11. Enter the encryption key.
The encryption key is displayed as a series of [*]. If you do not know the encryption key, contact the person who set up or maintains the access point for assistance.

When you have finished entering the encryption key and have confirmed the network configuration, a list of settings will be displayed.

Depending on the network environment, additional settings for PPPoE, proxy server or IP address may be required. For details on these settings, refer to the information from your Internet service provider or the instructions supplied with the network device.

12. Save your settings.
13. Test the connection.

If you select [Test Connection], the system will attempt to connect to the Internet.

14. Confirm the connection test results.

If a successful connection has been made, information on the network will be displayed.

Internet Connection Settings (advanced settings)
If you are unable to connect to the Internet with basic settings, change your settings as necessary. Adjust each item as necessary for your particular network environment.

1. Select (Network Settings) under (Settings) in the home menu.

2. Select [Internet Connection Settings].
Select [Yes] when a confirmation screen is displayed stating that you will be disconnected from the Internet.

3. Select [Custom].

Adjust each item as necessary for the network environment in use. The items displayed vary depending on the settings you have selected.
Connection Method
Set the method for connecting to the Internet. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.

Wired Connection

Make a wired connection using an Ethernet cable
Wireless
Make a wireless connection via a wireless LAN
WLAN Settings
Set the SSID of the access point. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.

Scan
Scan for a nearby access point.

Select this setting when you do not know the SSID of the access point. The system will detect nearby access points and display information on the SSID and security settings.
Enter Manually Specify the access point by entering its SSID manually using a keyboard.

Select this setting when you know the SSID.
Automatic U
Use the automatic setting feature of the access point.

This setting is available only in regions where PS3™ systems that support this feature are sold. Select this setting when using an access point that supports automatic setup. Follow the on-screen instructions.
WLAN Security Setting
Set an encryption key for an access point. This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.

None Do not set an encryption key.
WEP Set an encryption key.

The encryption key can be entered on the next screen. The encryption key is displayed as a series of asterisks.
WPA-PSK / WPA2-PSK
Authentication Setting
These settings are available only on PS3™ systems sold in Korea and are available only on PS3™ systems that are equipped with the wireless LAN feature.

None Do not set authentication information.
EAP-MD5 Set authentication information when using public WLAN services.

Enter your user ID and password on the next screen. For details, refer to the information supplied by the public WLAN service provider.
Ethernet Operation Mode
Set the Ethernet data transfer rate and operation method. Usually select [Auto-Detect].

Auto-Detect Automatically set basic settings.
Manual Settings Manually adjust the Ethernet data transfer rate and operation method.
IP Address Setting
Set the method for obtaining an IP address when connecting to the Internet.

Automatic Use the IP address allocated by the DHCP server.

You can enter the DHCP server host name on the next screen.
Manual Set the IP address manually.

You can enter values for the IP address, subnet mask, default router and primary and secondary DNS on the next screen.
PPPoE Connect to the Internet using PPPoE.

You can enter your user ID and password on the next screen.
DNS Setting
Set the DNS server.

Automatic Automatically acquire the DNS server address.
Manual Manually enter the DNS server address.
MTU
Configure the MTU value used when transmitting data. Usually select [Automatic].

Automatic Automatically set the MTU value.
Manual Specify the maximum size of data packets (in bytes) that can be sent in one transmission.
Proxy Server
Set the proxy server to be used.

Do Not Use Do not use a proxy server.
Use Use a proxy server.

You can enter the proxy server address and port number on the next screen.
UPnP
Set to enable or disable UPnP (Universal Plug and Play).

Enable Enable UPnP.
Disable Disable UPnP.

Nov 09, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
Routers Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...