Question about Linksys WUSB300N Wireless Adapter

1 Answer

Cyclic redundancy check error

When installing, it gets to 30% then a pop up window appears with the words:
Component: Main App
File Group: Diagnostic
File: D:\Utility\data2.cab
Error: Data Error (cyclic redundancy check).

Then it just stays at the 30% forever and doesn't move anymore, i would love it if somebody could help me please.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Trying Downloading Quick Install for the WUSB300N from
www.linksys.com

Posted on Mar 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sudden low signal strength fell from 54mbps to 12 mbps. Have rebooted router and computer several tomes with no success. Both of our other computers are registering 54 mbps consistantly. Problem started 2...


Update the driver of it.

Step 1:
To go to the Linksys download page, click here. Verify the model and version number of your Linksys product. For instructions, click the link Where's my model number.
Step 2:
After obtaining the model number of the Linksys product, enter the model number in the Start Here field, then click the kb4873-002_en.png button.

Step 3:
Look for Select Hardware Version and select the version of the Linksys product from the drop-down menu.

Step 4:
Click Download to download the latest driver file.

kb4873-005_en.png

NOTE: If you are using Windows XP Service Pack 2 (SP2) and Internet Explorer, you may see a Pop-up blocked message in your browser Information Bar. If so, click the bar and select Temporarily Allow Pop-ups then click Download again.

Step 5:
Click Save when the File Download dialog box appears. In the Save As dialog box, choose a location for the file like the Desktop and click Save. When the download is complete, click Close, if prompted.

Step 6:
Double-click the .zip file and extract its contents to a single folder or to the Desktop. After downloading the drivers then update the drivers. For instructions, follow the steps below.


HOW TO UPDATE DRIVER?

Windows XP

Step 1:
Right-click My Computer then click Properties.

Step 2:
Click the Hardware tab then click Device Manager.

Step 3:
Click Network adapters. A list of network adapters will appear. Right-click Linksys Wireless-B PCI Adapter then click Update Driver.

Step 4:
The Hardware Update Wizard window will immediately appear. Click Install from a list or specific location (Advanced) then click Next.

Step 5:
Click Search for the best driver in these locations. Check Include this location in the search then Browse.

Step 6:
Browse to the location where the driver files were extracted and click the folder. When the folder is selected, click OK.

Step 7:
Click Next to update the drivers of your Linksys Wireless-B PCI network adapter.

Step 8:
Click Finish.
.

Nov 10, 2010 | Linksys (WMP54GS) 802.11g/b Wireless...

2 Answers

Deel Truemobile 1450 dualband wireless card


Hi,
The problem is with the driver click here to download it.

Installation Instructions:


1. download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Install

1.Double-click the new icon on the desktop labeled R140747.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R140747. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R140747 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.

Goodluck,
Please don't forget to rate me as fixya..

Feb 04, 2008 | Dell 1450 (D1450U) Wireless Adapter

1 Answer

3COM PC Card model 3CRWE154G72 Error code 10: device cannot start


a windows file or files is definitely corrupt,either repair windows xp with service pack3 if possible or do a complete format and re-installation.,and the card should work fine

Nov 24, 2009 | 3Com OfficeConnect Wireless 11g 802.11g/b...

1 Answer

D-Link Air DWL 520 802.11b Wireless Adapter won't install?


It might be that your windows might be corrupt or try inserting the adapter on a different PCI port on the motherboard and reinstall the drivers for the Network Wireless Adapter Card. And see what happens. If you are still experiencing the same problem, my very best advise should be to take you computer to a computer shop where they can both physically as well as test the operating systems for any errors.

Jul 27, 2009 | Network & Wireless Adapters

1 Answer

Sony UWA-NA1 - no available driver for Windows? what specs does it have? It seems that with a Giga Juke Hifi-stereo, it will only communicate with WEP encryption, but the Wireless Giga Juke player station...


I found it! Sony UWA-NA1 USB Wireless Adaptor is a OEM products of Quanta Microsystems Inc, it's using the same USB adaptor as Ralink RT73 USB Wireless LAN card with RT2571WF chipset. I did it work ok in window 7 64-bit. But in the link below, its support XP, Vista as well.
1. Download Drivers for XP/Vista/Win7 here: http://www.station-drivers.com/page/ralink.htmChoose Ralink RT257x/RT2671/RT520x (RT73 series USB Wireless LAN)
2. After download it, run it to install the Ralink Wireless App, check for the driver only. When it done, find the folder it has installed. 3. Open device manager in window managerment, choose the Wireless USB (have no driver with yellow !), right-click, update driver software..
3.a Click "Let me pick from a list of device drivers on my computer". Find the "Network adaptor" in the category devices list, click on it, OK.
3.b In a new window name "Select Network Adapter", choose "Have Disk..." then browse the path of folder Ralink has installed. Your will see a file "netr7364.inf" (may be in XP-32bit or Win7 32bit you will a difference *.inf file). Click on it, click open, then OK.
3.c In the left box, find Ralink Technology Corp. click on it, the find RT73 USB Wireless LAN card, then click NEXT, a "Update Driver Warning" pop-up will appears, just click yes. Then windows will install the driver for Sony UWA-NA1 as "RT73 USB Wireless Card". Good luck! (You may try another devices in the list at your own at risk)P/s: Sorry for my bad english! English is not my primary language.

Jul 08, 2009 | Sony Network & Wireless Adapters

1 Answer

I am using Windows Vista on my laptop. I have


Have you tried the Netgear site:
http://kb.netgear.com/app/answers/detail/a_id/30/session/L2F2LzEvc2lkL2RZN3d4T0Fq

Jun 20, 2009 | NetGear : WG111 54 Mbps Wireless USB 2.0...

3 Answers

Can't install on new computer


Are you running 64 bit Vista?

If so you will need 64 Bit drivers for the device

Download this file

http://www.dynexproducts.com/skins/skin_1/Topics/Drivers/DX-EBUSB_2.03.05_Setup.exe

DO NOT CONNECT THE DEVICE UNTIL IT TELLS YOU

When the windows warning pops up, Install the driver anyway. then connect the device, that should fix the problem It worked on my 64bit Vista Ultimate

Aug 24, 2008 | Dynex Enhanced Wireless-G USB 2.0 Network...

1 Answer

Strange problem about WBR 1310


Step 1: Start the System Configuration Utility
Click Start, click Run, type msconfig, and then click OK.

The System Configuration Utility dialog box appears.

Step 2: Configure selective startup options
1. In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup.

2. Click to clear the Process SYSTEM.INI File check box.

3. Click to clear the Process WIN.INI File check box.

4. Click to clear the Load Startup Items check box.

5. Click the Services tab.

6. Click to select the Hide All Microsoft Services check box.

7. Click Disable All, then got to Startup click Disable All and then Apply and then click OK..

8. When you are prompted, click Restart to restart the computer.


Step 3: Log on to Windows
1. Log on to Windows.

2. When you receive the following message, click to select the Don't show this message or launch the System Configuration Utility when Windows start check box, and then click OK:

You have used the System Configuration Utility to make changes to the way Windows starts.

The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts.

Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the System Configuration Utility.


Step 4: Optional step to disable features
This step temporarily disables Microsoft features such as Plug and Play, networking, event logging, and error reporting. Also, this step permanently removes the restore points from the computer. The System Restore feature uses restore points to restore your computer to an earlier state. If you remove the restore points, you can no longer restore Windows to an earlier state.

1. Click Start, click Run, type msconfig, and then click OK.

The System Configuration Utility dialog box appears.

2. Click the General tab, click to clear the Load System Services check box, and then click OK.

3. When you are prompted, click Restart to restart the computer.

Aug 11, 2008 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Cyclic redundancy check


It sounds as if the install software is corrupted.

Download a new copy and try again.

The Linksys download page is here.

http://www-uk.linksys.com/servlet/Satellite?c=L_Content_C1&childpagename=UK%2FLayout&cid=1129319214507&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1450714507L02


Hope this helps!

Matt

Feb 29, 2008 | Linksys WUSB300N Wireless Adapter

1 Answer

Can't Connect to wireless router


First, if you are using XP, and installed the Dlink Adapter Utility on your computer, you need to turn off the Windows Zero Wireless Configuration Utility in the Services Panel.. (it is not a good idea to run both the Proprietary Utility (Dlink) AND the Windows Utility..

If you did not install this Dlink Utilty, Ignore the following!

Start > Run > services.msc (ok)

Services Window pops up.

Scroll down to the Windows Zero Wireless Configuration and Disable it.

Now, try to connect again and see if the password box comes up!

BTW: you need to make sure that the type of Encryption you setup on the router is compatible with your card. In other words, make sure that if you enabled WAP that the card supports it...

Dec 05, 2007 | Network & Wireless Adapters

Not finding what you are looking for?
Linksys WUSB300N Wireless Adapter Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Are you a Linksys Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...