Question about NetGear WGR614 Wireless Router
My NETGEAR wireless-G Router WGR614 is not recognising in INDIA. it shows only "united states" as a country in listbox.
Step One : open the web broweser and type http://www.routerlogin.net/ or http://192.168.1.1/.
Step Two: it would ask you for username and password. enter Username : admin and Password : password .
Step Three : Confiuring the router.
1) please avoid setup wizard and confure it manually and follow the steps below.
2) you would need to click on left frame buttons for the configration to come on the right side.
3) On the right menu now click on wireless settings in the setup section.
a) give a SSID name that is a name you want to see when connecting to the the wireless router while connecting from a wireless device. E.g. ( "mp's netowrk",etc.)
b) Region Select Asia (If asia is not appearing no problems), Wi-Fi is an unlicenced frequency so wont cause any problems but in this region Channel 11 is used so please set channel to 11. If still not working we will figure it out. (altough please follow all the steps.
c) Set Channel as "11"
d) mode should be set as "g and b"
b) set security option as WPA-PSK the third option.
give a password like "abcde12345" should be 10 charactes and alpha-numerical. ( This option is to make your Wi-Fi more secure and to avoid unauthorized access. Key lifetime : 60minutes
then click Click "Apply"
5) Now on the right menu goto advanced tab and click on LAN IP Setup.
a) In LAN Tcp/ip setup change the ip address to : 188.8.131.52 (to avoid dsl ip conflict)
b) there should be a check on use router as DHCP Server.
Starting IP Address 184.108.40.206
Ending IP Address 220.127.116.11
(the ip range should not be more that five ip address as otherwise the performance output would be pathetic)
Then Click "Apply".
Router Config Done..Now on the right side click in "Logout" (bottom most option)
after the router logout is done close the web browser and remove the network cable and the the power cable from the router.
Post Configring Steps :
a) Swich off the dsl modem.
b) plug the dsl cable to the internet jack in the router.
c) plug in the router power cable back to switch on the router.
d) Switch on the DSL Modem.
Wait for 15 Seconds.
Connect to you wireless netowrk using you laptop or wireless card in your computer and provide the WPA-PSK - TKIP passord which you had given in router for preventing unauhorized access.
Bingo !! you are connected...and more secure.
(In your case if still not working we would try a firmware upgrade for you router next.
Posted on Mar 16, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 19, 2011 | NetGear WGR614 Router
Mar 08, 2011 | NetGear WGR614 Wireless Router
Dec 29, 2009 | NetGear WGR614 Wireless Router
Oct 07, 2009 | NetGear WIRELESS-G WGR614 802.11G WIRELESS...
Apr 27, 2009 | NetGear WGR614 54 Mbps Wireless Router -...
Apr 03, 2009 | NetGear WGR614 54 Mbps Wireless Router -...
Aug 19, 2008 | NetGear WGR614 Wireless Router
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: