Question about Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC

3 Answers

Hinhem.scr problem

Posted by on

  • Anonymous Dec 19, 2008

    name Win32.Trax.A


×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Okay this is what I found out. Thanks for one word tard "problem". Very helpful. No actually a waste of 1.5 sec of my time to find out what this is. Okay anyways I found out that it is bad. .SCR is a script file which makes a variety of registry changes "hinhem" and etc etc blah blah virus writeup bs always the same M.O. . Also this script has been known to take over yahoo messenger and IM itself to everyone on the users buddy list. Wack! Okay so let me find remedy. Looks like this particular script is just a part of what is dropped by at leaset one internet worm. (W32.Blastclan.B) So to make this as painfree as possible the removal of this and most likely the rest of the payload that was dropped on your system goto here http://www.symantec.com/security_response/writeup.jsp?docid=2007-091311-1856-99&tabid=3



Lol I should do this for a living.

Posted on Jan 28, 2009

Vbnvbnbvnc

Posted on Apr 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

A description of the problem would be more helpfull

Posted on Feb 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Digistat scr


Assuming you're referring to the Digistat SCR receiver and not to a digital camera, you may download the manual here. The SCR section begins on page 6.

Feb 16, 2012 | Cameras

1 Answer

Can someone please help me i need the codes for the starveiw boxes can anyone please help thank you


Hello

The codes to switch between computers are:

SCR LOCK + SCR LOCk + 1 or 2

(Hit the Scroll Lock 2 times to access the KVM, press the number of the port you want to access).

Auto scan all ports - SCR Lock + SCR Lock + S


The manual can be downloaded here...

http://www.startech.com/Data/ProductManuals/sv221dvi.pdf

May 01, 2010 | StarTech.com StarView SV221DVI 2-port KVM...

1 Answer

A computer expert change my admin password. how I break that password


Here are the steps involved to Hack the Window XP Administrator Password .
  1. Go to Start –> Run –> Type in CMD
  2. You will get a command prompt. Enter these commands the way it is given
  3. cd\
  4. cd\ windows\system32
  5. mkdir temphack
  6. copy logon.scr temphack\logon.scr
  7. copy cmd.exe temphack\cmd.exe
  8. del logon.scr
  9. rename cmd.exe logon.scr
  10. exit
Wait its not over read the rest to find out how to Hack the Window XP Administrator Password
A Brief explanation of what you are currently doing here is
Your are nagivating to the windows system Directory where the system files are stored. Next your creating a temporary directory called mkdir. After which you are copying or backing up the logon.scr and cmd.exe files into the mkdir then you are deleting the logon.scr file and renaming cmd.exe file to logon.scr.
So basically you are telling windows is to backup the command program and the screen saver file. Then we edited the settings so when windows loads the screen saver, we will get an unprotected dos prompt without logging in. When this appears enter this command

Apr 20, 2010 | Microsoft Windows Vista Home Premium with...

2 Answers

How to change the Windows Logon screen saver from GPO


OK I know how to change the logon screen saver. I have a small batch
file to do it as part of our install process and it works. What I
would like to do is use our university logo and have it move around
the screen.

How do I have my scr file move around the screen like logon.scr ?


---blank-scr.bat---
:: Install a blank screen saver

@echo off
copy /y %Z%\packages\blank.scr %WinDir%\system32

:: Change logo screenscaver from logon.scr to blank.scr
reg add "HKU\.DEFAULT\Control Panel\Desktop" /v SCRNSAVE.EXE /t REG_SZ
/d blank.scr /f > nul

:: Change blanking time to 60 seconds
reg add "HKU\.DEFAULT\Control Panel\Desktop" /v ScreenSaveTimeOut /t
REG_SZ /d 60 /f > nul
-------


Thanks please keep updated.please do rate the solution positively .thank you for using fixya.

Nov 11, 2009 | Microsoft Windows Server 2008 Enterprise...

1 Answer

I have a digistat scr with a flashing red light and no heating there is nothing wrong with the batteries, this only occured after a poweer cut.


Try this first before condeming the unit.

1. Turn off the power supply to the Digistat SCR (receiver unit)
and leave for 5 seconds.
2. Turn on power to SCR unit and check red light is on.
3. Press override button No.2 and check the green light comes
on and boiler fires.
4. Press & hold down button No.1 (Keep depressed), then
press No.2 and keep depressed. {The Red LED light will flash
a couple of times and then it will go out}
5. Now release both the buttons – {the two LED lights should
come back on}
6. Get the Digistat+2RF/+3RF unit and stand two metres away
from the SCR unit with the Digistat+2RF/+3RF unit in your hand.
7. Remove the battery cover and fit the batteries.
8. The Red LED light on the SCR will now flash for approx. 7
seconds.
9. This confirms that the radio signal is being sent and
received.
10. The Digistat+2RF/+3RF and the SCR are now successfully
linked by a dedicated RF address.

Mar 21, 2009 | Water Heaters

1 Answer

Need to know what the the meaning of SCR on faceplate


A solid state switching device that turns current on and off. SCR's use a small amount of current to switch hundreds of amps without being damaged. Please rate my Solution for your problem and thank you for using FIX YA!

Dec 28, 2008 | Car Audio & Video

1 Answer

Hp nc6230


hello there,

U can try booting into Safe mode with networking option.

If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:
cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes
"net user <admin account name here> password"
If the Administrator Account is called Frank and you want the password blah enter this
"net user Frank blah"
and this changes the password on franks machine to blah and your in.

Mar 24, 2008 | HP Compaq nc6320 Notebook

1 Answer

Power up password


Your have to reinstall the operating system or Alternate choice below


If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:
cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes
"net user <admin account name here> password"
If the Administrator Account is called Frank and you want the password blah enter this
"net user Frank blah"
and this changes the password on franks machine to blah and your in.

Mar 24, 2008 | HP Compaq nc6320 Notebook

1 Answer

Prt scr key


After you press print scr, it won't print to printer, you need to paste it in application such as paint (come with ms windows) and from there you can print it to printer.
the combination key,
try press prn scr only and paste it in paint application.
if it isnot working, try using shift+prn scr.

Feb 18, 2008 | Dell Inspiron 1000 Notebook

1 Answer

RCA CHASSIS CTC195K BLOWA SCR


make sure that the scr has adequate insulation. I have run into this problem before several times, and it always comes back to the scr and heatsink. check for shorts before you plug it in. unless you have an isolation transformer, do not hook up ac powered equipment to chassis ground, as this will blow your transistor again. use dc poweered volt-ohm meter.

Jul 31, 2007 | RCA HD61LPW42 61" Rear Projection HDTV

Not finding what you are looking for?
Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...