Question about E-Machines eMachines Refurbished EMA eMachines PC Desktop

1 Answer

Usb none of my 7 usb ports work. they are all dead

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 100 Answers

Hi,
Better to u purchase new motherboard.If u giving for service,next time other port problem coming.


Thanks

Posted on Feb 29, 2008

2 Suggested Answers

  • 195 Answers

SOURCE: usb ports not working, drivers ok,

Dear Greg.

If you recently or earlier installed any type of Audio or Video Hardware such as an Upgrade. or better equipment than originally come with your Computer, than the New Equipment Nullifys your front USB. You probably have to go to the rear of your computer instead of using the convienient front. If that works than you have to decide is the new equipment worth the inconvienience. Hope this helps,

please rate my service even if its bad, thank you.

also, another tip is to use Fire Fox, thats a Free Bee if you own a portable SanDisk which stores info like a disk. which is probably why you want your USB instead of just Cameras, External Plug Ins, ETC.

Posted on Jun 24, 2009

  • 2 Answers

SOURCE: none of my usb ports work. Help!

  1. restart the computer 
  2. to to bios setup 
  3. enable the usb port  or use auto detect settings 
  4. save changes 
  5. restart the computer 

Posted on Apr 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One of the USB ports on my T3504 was damaged. Now none of the ports work. Can I purchase a USB expansion card to solve the problem?


a usb expansion port would work. its likely however that the pins in the damaged port are shorting out, try to look into the port and move any pins apart that are touching

Feb 24, 2011 | E-Machines T3504 PC Desktop

1 Answer

None of my usb ports work. Help!


  1. restart the computer 
  2. to to bios setup 
  3. enable the usb port  or use auto detect settings 
  4. save changes 
  5. restart the computer 

Apr 09, 2010 | Dell Dimension 5150 (DIM515MIN) PC Desktop

1 Answer

I have 3 usb ports( two at the back and one on the


Check to see if something else will work on the side port. It may not necessarily be a dead port. Just something you should know too; I used to work for Wal-Mart in the electronics department and they had to recall all their firefly flash drives because they had a tendancy to malfunction. Try using it on a different computer, it might just be a dead flash drive. I hope this helps your problem and I hope your flash drive didn't have anything too important on it :x

Oct 15, 2009 | PC Desktops

2 Answers

Year old desktop usb ports went dead. Are powered


make sure all five wires per port are hooked up as the manufacturer says to hook up

Jun 27, 2009 | PC Desktops

1 Answer

Sony Vaio USB ports not recognised by XP


It is common problem on most of the PC USB ports does not recognise external hardware.It is mainly due to lack power supplied by the USB Ports..You can try with Old Pentium4 maschines.IT Reads well..

Another thing dont use extension ports to plug external HDD..always use backside on board ports.\

IF it helps rate me

Jun 25, 2009 | Sony VAIO Digital Studio PCV-RX560 PC...

2 Answers

Usb ports not working, drivers ok,


Click on the link below and scroll down to the "Fixit" button. This is a patch to enable USB devices. This is a common problem especially after running Windows Update. Good luck.
Greg

http://support.microsoft.com/kb/817900

May 29, 2009 | HP Compaq Presario SR1820NX (ER919AA) PC...

1 Answer

USB ports no longer working


After all done,
Did you think of replacing motherboard?

Feb 17, 2008 | PC Desktops

2 Answers

Usb ports not picking up memory stick


Is it just Memory Stick, or everything that you plug into USB?
Try following:
  1. plug in other USB device into ports
  2. if it does not detect any USB device on any port on your computer
  3. if both front and back USB do not work it may be taht USB is turned off in BIOS, or USB driver is corupted
  4. If you have front USBs and they just do not work there is wire connecting them to the motherboard since it may be loose, if connection is OK than they are dead.
  5. If just back USB do not work than they are dead>

Jan 30, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an E-Machines PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...