Question about Olympus Camedia C-750 Ultra Zoom Digital Camera

3 Answers

Lose custom camera settings.

Lately, whenever I change batteries on my fourish yr old C750, I lose all of my camera settings. It reverts back to the factory ones, Is there a backup battery or internal power supply somewhere in the camera to preserve my settings while the main batteries are being changed out? Any help is appreciated.

Posted by on

  • Anonymous Mar 13, 2014

    Coolpix P100 will not hold settings when changin main camera battery.



3 Answers

The problem is that the capacitor is not working any more. At this site you can find all the details.

Posted on Apr 04, 2008


Here you can see how to change the wrong capacitor. I can fix it and want to buy a few so I can resell them in Belgium or the rest of Europe because I only need one. Only the shipping cost is high. 2 euro for one capacitor but 25 euro shippingcosts.

Posted on Apr 04, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm from Belgium and have the same problem. I tried to put an 6V adapter in the camera while I changed the batteries but nothing helps. I hope we can find a sollution.

Posted on Apr 03, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Settings memory

There is no other battery for your settings, as indicated by the manual if you leave your camera for more then 1 hour without batteries (or dead batteries) you will loose all you settings.

Unfortunately is the way this camera works.

The only other thing that you would like to verify is the following setting but should not be your case because if ON it should revert to the factory setting every time you turn power off.


Feb 13, 2008 | Olympus Camedia C-750 Ultra Zoom Digital...

1 Answer

Changed abttery in car, now the back up camera does not come on in reverse

Kimmy, Always connect a small memory keeper battery to your vehicles electrical system during battery replacement and you will avoid losing your systems settings. The engine control module probably reverted back to a basic setting when you took out the battery, sort of like losing the clock setting when the battery on a computer mother-board dies. You will probably have to get a dealer or professional mechanic shop to flash (re-program) your on-board computer with the most recent updates for your vehicle.

Aug 24, 2012 | Ford F-150 Cars & Trucks

2 Answers

Fuji E550 loses date and time every time i change batteries

Theres a small back-up battery located on the main
power board. It's not a DIY project to replace this battery.

Feb 17, 2010 | Fuji FinePix E550 Digital Camera

1 Answer

The main batter will not hold its charge when left in the camera.

After 12 months use camera batteries will not hold a true charge, but they can still be used for clocks, or remotes. Buy new ones. We all have the same problem.

Mar 08, 2009 | Sony Alpha DSLR-A100 Digital Camera

1 Answer

"change the batteries" allert whenever i operate my camera

Ok the SxIS series has another battery which is used for the date and other important data like settings and stuff. This is usually a small battery like a CR1002 the flat ones to be exact. Try changing that one and see how it goes.

Thanks for the feedback.

Feb 26, 2009 | Canon PowerShot S51S Digital Camera

1 Answer

Custom settings disappear

This was already answered! See prior questions... indicates to go here for how to

Mar 24, 2008 | Olympus Camedia C-750 Ultra Zoom Digital...

1 Answer

Exposure compensation problems

The exposure compensation stays where you leave it unless you do a full reset or a custom reset, and except when you're using scene modes. But you don't need to do a reset to cancel out an exposure compensation -- simply use the exposure compensation button to adjust the compensation back to 0.0EV.

Nov 12, 2007 | Olympus EVOLT E-500 Digital Camera

1 Answer

Embedded date on photos

this camera has an internal clock battery, which must keep the date or any other related information while you changing the batteries, the problem is, since you camera is pretty old, the clock battery is probably long dead, it can be changed, but it will require disassembling and resoldering

Aug 19, 2007 | Kodak EasyShare CX4310 Digital Camera

Not finding what you are looking for?
Olympus Camedia C-750 Ultra Zoom Digital Camera Logo

Related Topics:

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides