Question about NetGear DG834G Router

1 Answer

Netgear DG834G v3 Installation

Hi Chaps

Trying to install a netgear DG834G router (currently at factory settings) but dont have an install wizard disk , currently using an adsl usb modem (tiscali)...help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Connect the yellow (or blue?) ethernet cable to your computer, this should connect to the router (router should be ON)

Now, in internet explorer type 192.168.0.1 (this should be the defualt gateway for the router on default settings.

Now you're into the router, there should be a setup wizard button in there.

See if you can set it up using that

Regards

Tony

Posted on Feb 28, 2008

  • Tony Morgan Feb 28, 2008

    Oh, default username and password is normally



    username: admin

    Password [nothing]



    or username : admin

    passord: admin



    OR



    username: admin

    Password: password



    one of those 3 =)

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot login into my netgear dg834gb v2 for remote management


Here is a site for your new firmware version:

http://kb.netgear.com/app/answers/detail/a_id/262/~/dg834(v1-%26-v2),-dg834g-(v1-%26-v2)-firmware-version-2.10.22

Here is a site for your product:

http://kb.netgear.com/app/products/model/a_id/2324

Maybe you have to reset it to factory settings.
There is a button next to the power inlet prees it with a pen.
Here is how you acces the router again:


  • IP address: 192.168.0.1 type this in your browser
  • Username: admin
  • Password: password (Sky-branded units have a default password of sky)
  • Function set to Router + Modem
To access the Setup Wizard installation and configuration program on your router:
  1. Connect your router to a computer by plugging one end of an Ethernet Cable into any of the four LAN ports on the back of your router.
  2. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  3. To install your router, simply click on the "Setup Wizard" link at the top of the left-hand navigation menu once you are logged into your router.
A video walk-through of installing and configuring your router using the Smart Wizard is available at http://kb.netgear.com/app/answers/detail/a_id/12873.

Hope this was helpfull.

Mar 17, 2011 | NetGear DG834G Router

1 Answer

Hi. i cannot get my new wireless netgear dg834g to connect to the internet. it never came with an installation disc. everything is connected properly. internet light is red not green. i havent been...


To access the Setup Wizard installation and configuration program on your router:
  1. Connect your router to a computer by plugging one end of an Ethernet Cable into any of the four LAN ports on the back of your router.
  2. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  3. To install your router, simply click on the "Setup Wizard" link at the top of the left-hand navigation menu once you are logged into your router.
A video walk-through of installing and configuring your router using the Smart Wizard is available at http://kb.netgear.com/app/answers/detail/a_id/12873.

Mar 06, 2011 | NetGear DG834G Router

1 Answer

Hi I'm looking to install a DG834G router to give wireless access but the only instal disc is from AOL and I'm not with them anymore, I have tiscali broadband. How do install the router if it won't plug...


Try NOT using any install disk.

Turn the TISCALI router off.
Turn the NetGear off.

Use an Ethernet cable to connect from the LAN port on the TISCALI router to the WAN port on the router.

Use another Ethenet cable to connect from one LAN port on the router to the network-port on your computer.

Turn the TISCALI on. Wait 60 seconds.
Turn the NetGear on. Wait 60 seconds.
Restart your computer.
Click Start
Click Run
Type CMD
Press Enter
Type IPCONFIG
Press Enter
Look for output like: Default Gateway....192.168.123.456
Note that the '123.456' will be some other numbers.
Start Internet Explorer.
Type http://192.168.123.456 (substitute the current values)
Login to the web-server running on the router.
Run the "Wireless Networking Setup Wizard"
to configure a SSID, an encryption-level (use 'WPA')
and a password for your network.
After the router restarts, you should be able to get wireless access, using the SSID and password that you configured your router to use.

Sep 29, 2010 | NetGear DG834G Router

1 Answer

I need a driver for my router dg834n


1. check the manual for installation of the router there should be a installation wizard to connect you properly.
this is found on the installation disk that came with the router.

May 16, 2010 | NetGear DG834G Router

1 Answer

Where to get or download smart wizard


Your install cd is here.

If this helped you, then please help me and vote kindly. Thank you

Oct 14, 2009 | NetGear DG834G Router

1 Answer

Cant get netgear to work


Open a web browser such as Internet Explorer and in the address bar type 192.168.0.1 and hit the Enter or Return key. This should take you to the routers internal User's Interface where you will be able to enter your ISP information.

Feb 26, 2009 | NetGear DG834G Router

1 Answer

Wireless INstallation


you need to ring your ISP to get a network user ID and password, when you enter these in to the router settings the Internet light will light up green.

Jun 08, 2008 | NetGear DG834G Router

1 Answer

Installation CD


Netgear lists these items to check.

http://kbserver.netgear.com/kb_web_files/N101234.asp

There is not really a driver needed, you just need to log into the router and adjust the appropriate settings.
See the installation and setup guides on Netgear's sight.

If you give me the link you are attempting to download, I'll help get you the file.

Jan 16, 2008 | NetGear DG834G 54 Mbps 802.11g Wireless...

2 Answers

Netgear dg 834gt modem


download from netgear site also manual in PDF format

Nov 09, 2007 | NetGear DG834G Router

Not finding what you are looking for?
NetGear DG834G Router Logo

Related Topics:

1,467 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...