Question about Radio Shack Pro-97 Handheld Scanner
THE SOLUTION PRINTED HERE DIDN'T HELP. DO I HAVE TO SEND IT SOMEWHERE??
If the scanner's display locks up or does not work properly after you connect a power source, you might need to reset or initialize it. If you have problems with the scanner, first try to reset it to retain the memory. Warning: Initializing the scanner will clear all channel memories and reverts it the state it was in right out of the box. To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. 'Please select factory tests. Exit if no key is pressed' will briefly appear. Then quickly press 1. 'Initialization clear all memory Enter to confirm Clear to exit' will briefly appear. Quickly press ENT to initialize. 'Initializing, Please stand by' then appears. Do not turn off the scanner while it is initializing. The display should then show M000 on the top line and Bank 0 CH 00 when finished.
Posted on Apr 12, 2008
Try to erase all the pre-programmed channels and then get them back, the info how to do it is in the manual....it worked for me
Posted on Mar 25, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 05, 2011 | Radio Shack Pro-94 Scanner
Jun 07, 2008 | Radio Shack Pro-97 Handheld Scanner
May 15, 2008 | Radio Shack Pro-2052 Scanner
Sep 08, 2010 | Radio Shack Pro-97 Handheld Scanner
May 20, 2010 | Radio Shack Pro-97 Handheld Scanner
Jan 24, 2010 | Radio Shack Pro-96 Scanner
Jul 13, 2008 | Office Equipment & Supplies
Mar 21, 2008 | Radio Shack Pro-95 Handheld Scanner
Mar 29, 2015 | Radio Shack Pro-97 Handheld Scanner
775 people viewed this question
Usually answered in minutes!