Question about Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver

1 Answer

Chuck will not release bit

I have a mortar mixing bit stuck in my drill and the chuck will not release. When i try to run the drill in reverse to remove the bit the chuck will stay stationary but the grip does not loosen

Posted by on

  • Anonymous Mar 18, 2014

    wurth air drill

  • Anonymous Mar 18, 2014

    Bosch angle drill collet chuck will not hold a bit

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,019 Answers

Hi,

the Chuck should be 2 Part.

Use 2 pair of stillsons Or pipe wrenches, Tight On the 2 Chuck Parts, Crack in opposite Directions.

Alternative, Use Wrench On Chuck Jaw, Short sharp Blow With Hammer.

Mike @ compurepair.


Posted on Feb 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ryobi 18v drill keyless chuck stuck


Try holding the bit in a vice and gently tap the chuck off of the bit and see it it releases the pressure on the jaws.

Jun 20, 2012 | Ryobi 18v Cordless Drill - P206 18 Volt V

2 Answers

How do I take a bit out?


It is a keyless chuck. Put the drill in reverse (chuck should spin to the left when viewed from the back) and hold the main body area of the chuck with your hand while slowly running the drill. The chuck will open (unless it is broke) and release the bit. You do the opposite (slowing running the drill in forward) for tightening a bit in the chuck.

Jul 16, 2011 | Dewalt 18v Battery Hammer Drill Dcd950...

1 Answer

How do you release the bits to change sizes


It is a keyless chuck. You should be able to grab the main body of the chuck and turn it to the left to release the bit. You can also hold the main body of the chuck and run the tool slowly in reverse whcih will also release the bit.

Jul 10, 2011 | Dewalt 18v Battery Hammer Drill Dcd950...

1 Answer

My drill 1/2" drill bit is stuck in my drill how in the hell do I get it to release???


Put the bit in a vise and try hittig the reverse button.If that does not work the tap the three lock tabs in the end of the chuck with a punch and you should be able to undo the chuck.

Jan 21, 2010 | Dewalt 18 Volt Compact Drill Kit

1 Answer

Describe how to remove drill bit and install a


Most cordless drills use keyless chucks these days. Shift the drill into reverse and hold the main body of the chuck. Pull the trigger and the bit should come out. Put it into forward and run it to tighten onto a new bit.

Dec 02, 2009 | Drills

1 Answer

Keyless chuck is stuck with bit inside I can't turn it counter clockwise to unlock I have a Makita 6349d drill


Try two channel lock pliers.
Hold the bit close the the base with one.
Take the other (cloth comes in handy here to prevent marring) and turn the chuck counter clockwise to release.

Alternative (little WD40 on the chuck)
One channel lock plier hold the chuck and put the drill in reverse.
The WD40 should allow the chuck to release easier.

Good luck!

Nov 10, 2009 | Makita 6349DWDE 18V 1/2" MXT Driver -...

2 Answers

Chuckless drill stuck tight with drill bit in


if you trap the chuck in a bench vice or alike and then use the drill in reverse in short bursts until it loosens a good spray with wd40 will also aid the situation

Mar 09, 2009 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

1 Answer

Drill bit is stuck inside my makita drill chuck


Try using the low torque setting on the drill when reversing and something to assist you getting a better grip to hold the chuck from spinning when reversing. This may help.

Good Luck

Dec 02, 2008 | Drills

2 Answers

Makita 6222D hole drill bit is stuck


When this happened to me I held the shaft of the drill bit tightly with my hand and reversed the direction of drive for an instant. It released at that point. It still does that occassionally though.

Jan 27, 2008 | Dewalt DW056 18 Volt Cordless Impact...

Not finding what you are looking for?
Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver Logo

1,247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Drills Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Jim Thurston

Level 3 Expert

670 Answers

Tyler Craig
Tyler Craig

Level 1 Expert

30 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...