Question about SanDisk Sansa c250 (2 GB) MP3 Player (SDMX7-2048)

1 Answer

Memory stick not identified.

I added new 4GB extn memory stick in player but its does not show in any where neither in player nor in PC.

Posted by on

  • Anonymous Mar 03, 2008

    Exactly the same problem

  • rolltide3332 Mar 19, 2008

    I have a new 4 GB micro SD HC card. Am I correct in saying that there is a new firmware that will allow me to use this new card on my sansa c250 V2. If it's true, How do I find it and download it?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The memory stick probably is not the right type. The Sansa only takes SD Micro chips. However, IIRC Micro only goes up to 2GB. So, if you have a 4GB chip is must be a SD HC (High Capacity). Unfortunately, these do not work in the Sansa.

Posted on Mar 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is wrong if memory stick does not play some of the music by FM mp3 player


You can Attach your device to pc

*Make a Backup of your memory card
*Then format your memory card
*Again Copy all songs to your memory card
*Put your memory stick to fm player

Thats It

It will now play all songs... !!

Feb 16, 2015 | Audio Players & Recorders

2 Answers

Why won't my Sansa 250R won't recognize an sd card?


Your 4GB card is actually a microSDHC card. The e250 works with microSD cards, 2GB and smaller.

Mar 10, 2013 | SanDisk Sansa e250 MP3 Player

1 Answer

How to restore my mp3 slick 4gb


Best is to use the reset on the player so as to restore the memory back in case this has hung up. Also if there is faulty files,error programs or virus within the loaded files , the it must be removed so as to restore the memory.

Dec 09, 2011 | Bell Technology Techsolo Slick Stick MP3...

1 Answer

Adding new mp3's


Have you loaded your software onto your pc?

Jul 23, 2008 | Disney Cars Digital Mix Sticks (128 MB)...

1 Answer

Memory stick not recognised


Hi,
You Need To Format The Memory card.
Should show up As A Drive In MyComputer/F:/G/H/I
Right Click And Properties.
Then Format The Stick.
Cool as A Cucumber.

Mike @ Compurepair.

Feb 28, 2008 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

Ipod 4gb error


I had the axact same problem and these instructions fixed it:
This guide is for you if:

1. You've bought a mpx player larger than 2 GigaBytes capacity (eg 4GB, 8GB, 60GB, etc). Not limiting to larger than 2GB, smaller capacity (eg 512MB, 1GB, etc) players are also subjected to possible memory hacks.
However, recently i've realised that the Actions chipset does support upto 4GB (2x2GB). Also, there were some unconfirmed news of genuine 4GB players.
2. You just bought a new player.
3. You are experiencing "Format Error" messages when adding or accessing music/videos on your player.
4. You are experiencing frequent Player Restarts (hanging on the hourglass) when playing certain songs.
5. Your player duplicates the music/video files that you add to it.
6. Your player does not allow you to move/delete files that you have copied to it.

If you fit any one of the above (or even all), then this guide is for you.
Why you should format:

1. Not formatting will only cause you ALOT of trouble and hassels in the future.
2. Not formatting increases the chance of killing your player in future, and you will need to perform the "Dead Player Recovery".
3. Ensures that what you have bought, is of the actual memory capacity.
4. If it is a gift for someone, you don't want them to come back to you with the above mentioned problems.

Common Myths regarding this formatting procedure:

1. You will not lose any firmware/theme related files.
2. You will not accidentally kill your player whilst doing so (unless you unplug or disconnect your player during the format process).

On completion of this guide, should you end up with lesser memory than what you have paid for, it would be recommended to contact your seller for a full refund.
Also, take a minute to fill in an online petition against eBay, Paypal and fraudalent sellers who knows about this problem, but persists to trade with such fraud items for monetary gains.
http://www.mympxplayer.org/petition-stop...ay--vt3442.html
Every signature plays a significant factor, the more signatures we have, the better chance of eBay shutting down such sellers permanantly.

STEP 1
Back Up All Your Data Before Proceeding! This Guide Will Clear Everything In Your Player's Memory Chip!
Install MP3 Utilities, any version will do. It usually comes on the CD with the player, or you can download version 3.68
Here, or version 4.03 Here, or version 4.05 Here. Any one of these will do. The Disk Tool Utility is the same.

STEP 2
Start up MP3 Utilities Disk Tool.
You will be shown a screen like this:
Ensure that you select LOW Format Type.
Next, go to the Partition and Encrypt tab as shown below.
Now, slide the Partition Slider all the way to the Right.
You will notice the "Setting encrypted disk capacity" increases, it is normal.IMPORTANT.IF YOUR MP4 PLAYER IS LIKE 2GB OR MORE MAKE SURE THE PARTITION AND ENCRYPT TAB WHEN YOU INCREASE IT SAYS YOUR PLAYERS MEMORY.FOR EXAMPLE.IF YOU HAVE A 4GB MP4 PLAYER AND YOU ARE SLIDING THE PARTITION AND ENCRYPT TAB MAKE SURE THAT WHEN THE NUMBER INCREASES IT SAYS SOMETHING LIKE 4000MB.IF IT DOESN'T DO THIS DO NOT REPEAT DO NOT DO THIS ENTIRE PROCESS.
*NOTE* Ensure That You Do Not Click The "Set Username And Password", Leave It UNTICKED.
Next, click on Start to begin the format and partition process. You will be presented with a dialog box like below, click on Yes to proceed.
It will take a few moments for the process to complete. You will notice that your player would disconnect from the computer, and then re-connect back again.
You will be presented with the "Complete setting disk partition!" dialog box like below.

STEP 3
Go to My Computer and check that now you will two memory drives for your player. You might need to click Refresh or press F5.

One of which would be small (about 17MB), and the other would be the remaining memory capacity.
*note* it seems that some members reported that they do not see this extra drive appearing. Do not worry if it does not appear, just continue to proceed with the guide.
Now, go back to the Partition and Encrypt tab.
Slide the Partition slider to the Left, and click on Start.

You will repeat the process and the "Complete setting disk partition!" dialog box would appear.

Check in My Computer that now you will only have One single memory drive for your player. Right click on it and select Properties, this is your actual real memory capacity.

Now check your player's Memory Info for the correct memory display.
To access this, go to your player's SYS TOOL >> MEMORY INFO.
Your player should display the actual memory size that you have just checked.
Check if the percentage is at 0%. If it is, you can skip Step 4 below, and continue to Step 5.

STEP 4
If your player's Memory Info does not show 0%, you will need to complete the below procedure.
Right click on your player's memory drive, and select Format.

Now a new windows format screen would appear.
Select FAT in the File System dropdown menu.
If after completing Step 3, your player really does have 4GB of memory, then you need to select FAT32 instead. As FAT only supports upto 2GB.
Click on Start to begin on the format process.
A warning will appear for the format, click on OK to continue.
Wait for a few moments while Windows formats your player.
When completed, check your player's Memory Info again, it should display 0% now.

STEP 5
Once completed, sit back and start copying music/video files to your player and enjoy your stuff!

Dec 27, 2007 | iLO (2 GB) MP3 Player

4 Answers

S1 mp3 player} player of 4GB decrease to 108MB


i have brought a new mp3/mp4{s1 mp3 player} player of 4GB.when ,i made a secert space with the help of mp3 disk tool.my memory of mp3/mp4{s1 mp3 player} player 
is decrease.Now it show only 108 MB.

Oct 04, 2007 | Sony NW-A1000 MP3 Player

5 Answers

Sonyns-11 mp3/wma/rec 1gb - memory loss


i have a phillips 2 gb mp3 and i lost all of its songs as they came with it it was new how do i get it back plz i wz crying man

Dec 28, 2006 | Pen Drive IVO MP3 Player

Not finding what you are looking for?
SanDisk Sansa  c250 (2 GB) MP3 Player (SDMX7-2048) Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Audio Players & Recorders Experts

kakima

Level 3 Expert

98782 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a SanDisk Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...