- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Welcome to Fixya Support I am Michelle, and i will be assisting you regarding the issue
Turn off the system. Unplug the power cord from the mains. Keep the power button of the cpu (not the monitor) pressed for 5-6 seconds. turn the unit bcak on and check.
Please reseat the monitor cable that connects to the desktop ensuring a secure connection.
Further, if you are able to see the Lenovo Logo on startup try booting to safe mode by tapping F8 key on the lenovo logo itself.
Howevre, in case you are not even able to view the lenovo logo on startup, then it could be a fault with the lcd monitor itself requiring a repair.
Press DEL on startup and select "last best known config that worked" If that doesn't work you have probably corrupted the Win registry.Will need to take back to store, beware that if its a software fault you will have to pay and may lose all your data n the HDD!!!
Usually system stops at the startup screen or the startup logo, when it finds some fault in detecting the IDE drives(ie,your harddisk or cd drive), if you dint get any get stuck in the logo, you have to see what happens at the background by clicking on f1 key or f12 or TAB or some key to show the activity rather than logo.....
After seeing the error we can conclude or decide about the problem, but when you were not able to see the screen after pressing any key as specified in your manual, Or it hangs after the LOGO screen, this must be problem with your harddrive, try changing the harddish or try connecting once again by removing it...
According to the manual it says to just hold down " [ ] " (STOP) On the unit itself for no less than 5 sec. Mine is stuck on "loading" and nothing is coming up on the screen and it happened when I tried to hit " logo " while a movie was paused and now it won't reset at all but I hope this will work for you.