Question about PC Desktops

1 Answer

I looking the quantum fireball CX10.oA (10.00GB) JUMPER

Posted by on

  • rochaantonio Mar 01, 2008

    the hard driver is 9 pin i looking the master\ slave jumper the hard driver is IDE ATA

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Which jumper are you looking for, if it's for the setting of Master/Slave/Cable Select it's ususually a bank of three pins set, 6 pins total, between the power connector and the IDE connector. If thats what you are looking for, write back and I'll send you the setting for whichever you're wanting to set the drive as.

Dave

Posted on Feb 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What settings in the bios with maxtor as slve and quantom fireball as master


There are no settings in the BIOS for setting up master ans slave drives.
The hard drives have jumpers for configuring master and Slave drives.
If your hard drives are IDE/PATA hard drives and you intend to install these drives on the same IDE cable then you can set the jumper on Quantum drive as Master and the Maxtor on Slave.
I suggest that you install the Quantum as master on the 1st IDE cable and the Maxtor as Master on the 2nd IDE cable for maximum data transfer rate between the two hard drived.
Any other devices that are connected to these IDE cables will need to be jumpered as Slave devices.

Mar 28, 2012 | Gateway PC Desktops

1 Answer

Quantum fireball qml20000ld-a jumper settings for master and cable select


sanwolverine.png

This is the Jumper Setting for Quantum Fireball Ty it

May 02, 2011 | PC Desktops

1 Answer

Will a quantum fireball 3 5 hard disk work in a dell 2400


it is going to work. dont worry about it.

Jan 20, 2010 | PC Desktops

5 Answers

Adding old hard disk. 20 GB Quantum Fireball Ict, in Dell 9200 PC


if it's old it's probably IDE also known as PATA. it looks like a wide ribbon. There should be a header on the motherboard that looks exactly like the plug on the back of the hard drive. It will be labeled IDE1 probably if you have it. Old motherboards used to have 2 IDE headers, modern ones have one or none. The ribbon will have three plugs--one for the mobo, and then two spaced closer together for the master and the slave. You need to hook it to the appropriate plug (master if it's the only device on the ribbon) and make sure the jumpers on the HD are set properly to make it self-identify as the master. Good luck!

Nov 09, 2009 | Dell Dimension 9200 PC Desktop

1 Answer

Quantum fireball 3.5 series HD that crash NEED to retrieve data


what error do you get on pc startup?
Alternatively you could try getting an external casing by putting the hard drive in there and try accessing the info from there.

Oct 26, 2009 | PC Desktops

1 Answer

How to Add an Extra Hard Drive Need more storage


From what i've read, it has a SATA hard drive with it. check the PC's Motherboard. If it has an IDE slot with it, then yes you can use it. But if not, you may need to purchase a new SATA HDD to use as an extra storage for your PC. Hope this helps.

Oct 13, 2009 | HP Hewlett Packard Pavilion a1016x PC...

1 Answer

I have an old competer with a QUANTUM FIREBALL 1ct 1507. When I reboot or start up the competer says: Windows found a problem with the hard drive consult your owners manual. Press any key to continue. I...


Maybe getting some of that stuff off of the C: drive will help. Windows needs 15% free drive space to run correctly. Going to a bigger drive is also an option. depends on how old the system is.

Jul 30, 2009 | PC Desktops

1 Answer

Help finding a source for Quantum Fireball KX27A011 (27.3GB IDE)


are you going to switch boards on the drive, hoping its not the moving parts? I will check the availability of that anywhere...

Jan 08, 2009 | PC Desktops

1 Answer

Need jumper settings for a IBM fireball plus 3.5 series ibm part number 09n0922 ibm fru 37l5723 20.4 gb firmware a3505 label also has lm20a341-01-m another lable has 20.5at p/n lm20a011 rev 01-a i need...


ftp://ftp.software.ibm.com/pc/pccbbs/options/09n4210.pdf

I couldent find the manual for the 20,4GB but i found the manual for the 40GB. The jumpersettind are the same on both of the disks

I hope it helps you

Good luck

If you find my answer helpfull, dont forget to vote

Dec 15, 2008 | PC Desktops

2 Answers

Hard drive for Tower PC


Hi I have a gateway tower about 7-9 years old. could you tell me how much a 60- 80 gig harddrive will cost and where I could get such an animal? I need to run a couple of programs and I don't have enough room.

Sep 09, 2008 | Gateway GT4022 PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...