Question about Mintek DTV-263 26 in. LCD Television

1 Answer

On-screen Menu I have a Mintek DTV-265 26" flat screen digital TV. I recently subscribed to DirecTV and it works fine; however, since it was installed I have not been able to access the on-screen menu and cannot use the manual control buttons for the TV nor the DVD. There is a disc in the DVD player and cannot be removed by pressing the Eject button. How can I revive the on-screen menu and resume control of the manual button commands?

Posted by on

  • wolfghia Aug 01, 2008

    To use the Direct TV remote with the Mintek-263, which code did you use on the Direct TV remote to synchronize with the Mintek-263 LCD color TV?

  • annezblessed Oct 27, 2008

    I need the code to be able to use the dish tv remote on my mintek DTV-263

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Actually, it is not a Projection TV Problem. The problem is with a Mintek DTV-265 26" flat screen digital TV (not projection). I have not yet resolved the problem by unplugging the set, pressing the eject button and replugging in the set nor have I had any other suggetions. The manual clearly indicates Mintek DTV-265 26" (not Mintek DTV-263) but I feel they are very similar; however, the manual does not mention losing/restoring the on screen menu.

Posted on Feb 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset mintek dtv-265-d telivision after replacing power supply


MINTEK DTV-373-D OWNER'S MANUAL Pdf Download.

www.manualslib.com > ... > TV DVD Combo > DTV-373-D
View and Download Mintek DTV-373-D owner's manual online. Mintek DTV-373-D OWNER'S MANUAL 37''. DTV-373-D TV DVD Combo pdf manual download.

Mintek DTV-265-D 26 in. LCD TV Factory reset - Questions ...

www.fixya.com > ... > Mintek > Mintek DTV-265-D 26 in. LCD TV
...factory reset to this TV. It will make all to factory settings. There are two types ofreset to TVs. The first is simple to do; a Hard Reset. The other is somewhat ...

Mintek reset button location Combination Televisions ... - Fixya


Dec 07, 2015 | Mintek DTV-263 26 in. LCD Television

2 Answers

Following the beginning of digital switchover, pressing the menu button only comes up with 'picture quality' and is unable to access 'installation'.


If your TV is not in Digital it won't give you the tuning option.
Select DTV from the on screen menu, (like scart 1 scart 2 etc). When you have found DTV select it and then press menu for tuning.
Hope that helps.

Mar 30, 2011 | Flat Panel Televisions

1 Answer

Puppy completely destroyed our remote,we have dish network also, in the process of eating remote she changed setting to cable and it needs to be on analog,so therefore all that is on screen is fuzz. Is...


With the other Mintek remote that is still intact first try to change the channel on the smaller Mintek television. Usually the remotes have a . or - in order to accommodate analog or digital channels. So directv is usually channel 3.0/3-0 or channel 60.0/60-0 or sometimes another channel as advised by direct tv. Try pressing 03 first or 60/61/whatever channel you are supposed to be on. If that doesn't work try 3.0/3-1 and then the enter/ok key. Try the channel up and down button as well.

Dec 05, 2010 | Mintek DTV-263 26 in. LCD Television

1 Answer

Mintek TV and Direct TV remote wont program


Try a code search, the method should be in the manual. If you can't get that to work then it's not possible to use the DirecTV remote.

If that's the case then get a learning remote.

Jul 30, 2009 | Mintek DTV-373-D 37 in. LCD HDTV

1 Answer

Air Digital No signal on the screen. Cannot change channels


hi my name is mark, since you have a cable box. you need to switch the tv back to the analog signal on the tv through setup or menu screen. then use cable remote to change channals. thanks for your question.

Dec 26, 2008 | Mintek DTV-263 26 in. LCD Television

1 Answer

Digital Board


I have an entire MEMTEK DTV-323 with remote. I was looking for a power supply but have not had any luck.

Aug 01, 2008 | Mintek DTV-323 32 in. LCD TV/DVD Combo

2 Answers

Mintek LCD TV DTV-320-D buttons does not work


Be advised that Mintek Digital Inc., the company that has sold portable DVD players, DVD Flat Screen TVs has filed bankruptcy in Federal Court. What this means to consumers is that your product(s) warranties that are within your purchase date are no longer valid. Anyone purchasing any Mintek products with claims of warranties are being mislead. For further information, contact the California Attorney General's Office, the Better Business Bureau or telephone 301-986-666 or email at mott@mpegla.com to seek compensation. Remember, if you buy any Mintek product, you are buying a product that cannot be supported or warranted. You are on your own since September 9, 2007.

Feb 16, 2008 | Mintek DTV-320D 32 in. LCD Television

2 Answers

Mintek 26" lcd hdtv dtv 265-d


mintek dtv-265-d THE TV WILL ONLY PLAY CHANNDEL 34 THE REMOTE WILL ONLY TURN ON OR OFF IS THERE A SERVICE MANUAL OR A REPAIR!!!!!!!!!!!!!! rad

Oct 09, 2007 | Mintek DTV-263 26 in. LCD Television

Not finding what you are looking for?
Mintek DTV-263 26 in. LCD Television Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mintek Flat Panel Televisions Experts

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Brad Brown

Level 3 Expert

13530 Answers

Are you a Mintek Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...