Need replacement caster wheel unit.

Question edited for clarity.
Question moved from Cars and Trucks.

It has a 5 year warranty, so you can just contact the company. The unit has a clock and a timer, so make sure that isn't activated. Also, it has a thermal cut out, so you can dry towels over it, or obstruct it in any way.

Here is your manual.

https://www.manualslib.com/manual/895683/Pelonis-Ho-158e.html?page=5#manual

..

luckily most
caster wheels can be interchanged or retro fitted to any oil heater

take one of the castors with you
just takes time to find 4 that will suit your heaters fitment
big hardware stores or a known caster wheel seller ,ebay



heater oil is heater oil so that can be sourced easily

a few older style Omas oil heaters for sale in New Zealand
newer models from amazon
cant find its user manual online
or a parts supplier that will carry Omas parts

That type of caster is widely available in bigger hardware stores

try this link below
http://www.shopvac.com/shopvac-accessories/Departments/Replacement-Vacuum-Parts-and-Caster-Wheels/Replacement-Caster-Wheels.aspx

10. You will find four casters (Figure B) and a dolly (Figure C) with your wet/dry vacuum. Assemble as follows:
11. If the casters are not already installed in dolly, insert casters into bottom of dolly by placing stem of caster into holes provided. Ap- ply pressure and twisting motion until casters snap into place (Figure 1).
12. With cord disconnected from receptacle and tank cover removed, turn tank upside down so that bottom is facing up.

As a general rule, it is best to replace the caster as a complete assembly consisting of tire and wheel hub. Usually this is the only way to replace casters when the tire is molded on to the wheel hub. It is the best way to replace the caster since you get a tire, wheel hub and 2 new bearings.
With regard to the drive wheels on a manual wheelchair you can get just a new tire. With a plastic mag wheel and hand-rim you can sometimes get just a replacement snap-on tire to replace the existing.(Snaps on like a rubber band using tire irons). If the hand-rim, wheel, spokes, and bearings are worn or broken, you are usually better off replacing the wheel assembly. With power chairs, it is more cost effective to only replace the drive tires and use the existing wheel rims. Hope this helps.

Is the model number FMP330RGB as listed at the very top? That number does not cross.

There are the parts listed as wheels / caster for Frigidaire:

http://www.repairclinic.com/Frigidaire-Dishwasher-Parts?s=b2a9c252

If you need more assistance just respond here with the complete make and model number and we will help you.

Thanks for using FixYa.

Kelly

http://www.pelonis.com/parts.htm

$2 for a caster, $15 for the wheel kit.