Question about Intel Motherboard

3 Answers

New cpu but no video output

Hi,
Today my new cpu arrived and sata hd and dvdrom but when i installed these parts into my pc i get no video output, the button of my monitor is just blinking.
All the fans are working etc.
I have tried to reset the bios by pulling out power cable + cmos battery + moving the jumper, but it still doesnt change anything.
my mobo is: asus m2n-e
old cpu amd 3500, new cpu amd X2 5200
Also replaced my old IDE hd and cdrom with sata hd and crom.
Hope somebody can help me!

Leendert

Posted by on

  • leendert86 Feb 28, 2008

    That shouldn't be an issue, i tried booting with the new hd / dvdrom but still same, black screen, cant get into bios.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 270 Answers

Do u have idea about processor sockets . AMD athlon x2 5200 + is AM2 socket . check ur mother board for socekt name . its wriiten in top of processor socket .. if its a 939 socket athlon x2 will not support that mobo and u hav to get the mobo a new one which is AM2 cpable

Posted on Aug 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,066 Answers

Update (flash) your bios to allow your mobo to recognize the new processor. make sure you rmobo is am2 compatible.

Posted on Mar 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

I SEE YOU MENTIONED NOTHING ABOUT INSTALLING ANY DRIVERS FOR THE HD'S DID YOU?
GOOD DAY
KZ

Posted on Feb 28, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recently I bought the ATI SAPPHIRE Radeon HD 6770 flex edition on ebay. Today it arrived and I put it in my motherboard MCP73PV ( from oem pc Acer Aspire M3641) (also i have a new power suply 450 Watt so...


in the bios, there are usually settings for onboard devices. try turning off your onboard vga in the bios. and/or enabling/disabling pci-e video settings in the bios. it also helpful to ensure there is a monitor plugged into the video card. if there are 2 video outputs on the new card, try plugging the monitor into one, reboot, if nothing shows up, plug the monitor in the other one, reboot, if nothing shows up; i dont know :)

Sep 12, 2013 | Computers & Internet

1 Answer

Install 2nd Hard Drive with different connectors and different OS.


yes you can use either sata power or molex(4 pin) plug to power your new SATA hard drive but not both at the same time.

Mar 19, 2012 | Samsung SpinPoint SP8004H 80 GB Hard Drive

1 Answer

I have HP Comaq Presario SR1617CL Desktop PC, part number ED870AA with a Samsung SpinPoint P80 SP1604N - hard drive - 160 GB - ATA-133, I would like to upgrade to a 500GB hard drive. I have a ASUS A8AE-LE...


XP cannot be installed natively on an SATA disk without the appropriate driver which must be loaded during the install - an extremely complicated maneuver. The best way to deal with that is to just add the new SATA hard disk: install XP on the PATA and use the new SATA for your files as a separate partition. The adapter cable can be bought for about $5 from the same shop as the hdd.
All the other modifications are just fine - just remember , the RAM will not be fully recognized and used because of the limitations of the 32bit XP.

Mar 11, 2011 | HP Compaq Presario SR1617CL PC Desktop

1 Answer

My dvd's and cd's will not play from my e drive. What's the problem and how can i fix it?


you can order a new DVD rom from newegg.com which cost less than $20.
it is easy to remove the dvd rom drive from your machine.
just open the case, unscrew the screws holding the dvd rom in and unplug the cables.
you need to find out whether you have a IDE DVDROM or SATA DVDROM before purchasing your new DVD rom drive.
IDE looks like a ribbin flat wide cable.
SATA is a skinny small cable.

Mar 10, 2011 | E-Machines eMachines Desktop PC

1 Answer

Installed win98se in maxtor 8gig hd on 2nd ribbon cable,deviceman sees 3 standard IDE controllers(no warning flags),3 primary and 3 secondary with the old yellow exclim.(!) warnings.I believe I need some...


windows 98 in year 2017, why/?
good luck,
why mess with this old box.
why not get a 10 year newer box for near nothing at GOODWILL.
really this box is land fill fodder. now. know body beats there head on w98 now....
mx.com no support
hp.com no support its on the no support page, seen here
Compaq Presario Media Center SR2030NX Desktop PC
so if a driver is bad (hell the hardware is too)
then go to the chips that fails home page

the mobo is ASUS>
A8M2N-LA
may be the they have 19 year old IDE drivers for win98
 GeForce 6150 LE chipset
the IDE is nforce , (old)
the only hope is Asus, old pages or nvida relic pages.

http://www.nvidia.com/object/nforce_nf4_winxp32_8.26_11.09.html

Mar 26, 2017 | HP Compaq Presario SR2030NX PC Desktop

1 Answer

Video graphics card, sata


having onboard video is acceptable in most cases with todays new motherboards as long as the system memory is enough for both the system and the video (onboard video steals some of the system memory)
A ad-in video card has it's own memory that is independent from the system which in most cases will speed up the system. Most gamers prefer this. this card is dependant on what slot you have available on your particular motherboard, example: PCI -AGP - or the current standard -PCI-E
as for sata , if you motherboard has open sata ports, you can use more than one sata harddrive.,

Apr 05, 2010 | Computers & Internet

1 Answer

How much is my computer worth


Hello,

Based on brand new parts:

500GB SATA - $56
160GB SATA - $45
4GB RAM - $112
V-card - $105
CPU (Proc., Mobo, P/S, reader) - approx. $107

Your rig can be sold at around $425 - $450 approximately.

Hope this helps.

I had assembled a Quadcore system at around $750.

Mar 20, 2010 | Computers & Internet

2 Answers

Hello Everyone, I have an old PC windows98 with maxtor 90840D5 hard drive. Sometime back I've removed the hard drive and attched it to the new PC, so as to access the old files.Today when I try reattach...


you need to detect your harddisk in bios setup.
For that when you power up the computer press "del" key to enter in bios.
Then check your harddisk is detected in bios.
If not cxheck power cable and ide or sata cable connected to harddisk.
Reconect both connection to harddisk then check.

Aug 01, 2009 | Maxtor DiamondMax 3400 (90840D5) 8.4 GB...

1 Answer

HP DV7 compared to newly released Acer 5738G ?


you can install xp on acer seamlessly but too many driver problems with hp. battery wont make much difference. acers display is awesome!

Apr 10, 2009 | HP Pavilion dv9700t Notebook PC

2 Answers

Pc shuts down during windows xp install


Hi!

Easy problem to solve my freind:)
Do like this, start the installation as you did before, when your pc restarts, get in to bios again and change the first boot from cd/dvd to the HDD. That will solve your instalation problem:)

Good luck to you
Please take a moment and rate my help for you

Nic

Feb 27, 2009 | Jetway Computers & Internet

Not finding what you are looking for?
Intel Motherboard Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...