Question about Zanussi Dishwashers
I have just received a zanussi zdf 131 dishwasher with instruction manual in some foreign language ...have googled for an english instruction manual but cannot find one,,,,can you help?
This is pretty complex machine and you would need to have and be able to use a multimeter to check some of the components.
The error code retrieved is shown in the service manual as follows.
Inconsistency between level on electronic pressure switch and level on anti-boiling pressure switch 2
Possible Causes are ;
Pressure switch defective;
Electrical current leak between heating element and ground;
Main board defective.
Unplug the appliance and take the top off.
Locate the pressure switches, circular items with thin tube attached to each.
Take the thin tubes off, block one with your thumb and blow as hard and as long as you can down the other.
Refit the tubes and try the machine again.
If still faulty, ensure the wiring to the switches and the main control board is good.
If still faulty, you'll need to take the rear panel off and check the heater.
If still faulty, it's time to begin replacing parts, first the pressure switches and if still not working the main control board
Read more: http://www.justanswer.com/questions/2o419-zanussi-zwf-1431w-washing-machine-error-30-being-displayed#ixzz0h0FQPFHS
Posted on Mar 02, 2010
Testimonial: "Prompt and helpful response"
SOURCE: My zanussi dishwasher, zdf 301
Check your heating element..
A bad heating element causes many problems in dishwashers...
Dishwasher Problems The Heating Element not Working
How to Replace the Dishwasher Heating Element
Asker's Testimonial " explanation very clear. will give it a go and seehow simple it was. thanks Ronnie " - ronnieshomes
Posted on Aug 05, 2011
Tips for a great answer:
Sep 11, 2011 | Dishwashers
Aug 03, 2011 | Dishwashers
Feb 18, 2011 | Zanussi Dishwashers
Oct 26, 2010 | Dishwashers
May 13, 2010 | Zanussi 23 in. ZDT6255 Built-In Dishwasher
Mar 02, 2010 | Dishwashers
May 25, 2009 | Zanussi 24 in. ZSF6150 Free-standing...
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: