Question about Intel Desktop Board D845WN Motherboard

1 Answer

Nothing will flat out turn on! The whole thing is just dead!

Hello, well my desktop is not working at all.
I remember the summer '07, i think I left it on and then I turned it off. After that, the computer would not turn on! I press the power button, nothing.The motherboard would no turn on, and the fan won't turn on either...just flat out nothing!
I looked inside, there is no green light like it usually did when it did work (sorry I don't have a lot of computer knowledge of parts and all that stuff, but I do somewhat lol) 
The power cord is plugged in, but there is just no power. I don't get how it would just turn off like that! please help! I have so many important files there and I don't want to go to a professional b/c I don't have that kind of money since I'm a poor college student lol
I keep thinking it has something to do this these colored cords. There is "Power LED" "Power reset" and "power reset". I dunno that maybe I unplugged them, but I don't really recall. Dunno if this has anything to do with the problem, but I just wanted to put that out there

Posted by on

  • Jill F Feb 28, 2008

    Haha um...how am I supposed to fix that whole thing? :P




    Someone plz post instructions on how to fix it (for a newbie who doesn't know too much about computer parts of course)


    thanks

  • Jill F Feb 28, 2008

    Ok i checked them. There are no leaks or bulges whatsoever.




    What else could be the problem?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 152 Answers

Check your motherboard capasitor near by cpu
if capasitor blow up so need to change

Posted on Feb 28, 2008

  • Harshad Patel
    Harshad Patel Feb 29, 2008

    so check for PSU



    disconnect all cables of psu after that 20pin atx connector find out green wire and sort to green and black {using upin or any other metal conductor} if your fan has started so your psu is ok

    if can't turn on so replace power supply





    all think do it after all power connector remove

  • Harshad Patel
    Harshad Patel Feb 29, 2008

    if you don't understand so reply me i will send you photo

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dead pixels


The lamp has nothing to do with dead pixels---no model is listed here but if a lamp you have a damaged optical light engine which causes the dead pixels in the picture.

Optical engines use a large number inside of micro-mirrors that open and close--if stuck in either position a pixel will not be working correctly.

Jun 11, 2012 | Televison & Video

2 Answers

We were watching tv and the screen went black, the sound got quieter and then it turned off. We left it overnight and now it won't even turn on. The red light isn't on to indicate the tv is off. We...


Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hope this will help in solving the problem...

Jun 26, 2011 | ViewSonic N3252w 32 in. LCD Television

1 Answer

We have a 46 inch sharp tv model number 46SB54U won't turn on. The green timer light is flashing. We just replaced the power supply board thinking that was the problem. TV still won't turn on...


Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

I hope this will helpout ......

Jun 25, 2011 | Sharp LC46SB54U 46 in. LCD TV

1 Answer

It was working great. we shut it off for dinner. when dinner was over, it was dead.. could not turn on...nothing nothi ng at all


Hello,

Your power supply board is dead, you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hope this will help to solve the problem.....

May 07, 2011 | Vizio 42 in. LCD TV

1 Answer

I have a 32inch hitachi and was working fine turned it off and when i went to turned it on nothing happened not even the red light came on have tried changing the fuse and still nothing only had it 18...


Check ur house power outlet source?Yes.Than the tv whole power supply board it is dead,modern electronic equipments rarely have dead fuses alone or only.Tries websites like Shopjimmy.com Ebay.com to buy a whole refurbish power supply board for the replacement.

Apr 30, 2011 | Hitachi 32LD8700 32 in. LCD Television

1 Answer

My dell computer was working properly the whole day and I turned off safely, when i came back in the morning I turned it on the power switch blinks orange and nothing works no fan no power. What I do


Hello there, I am the Expert that will be helping you today. My name is damnor01.

Welcome to Fixya.

Your computer system is is a state that is referred to as a dead computer system.

See my published guide entitled My Computer is not turning on!!! Is it dead!!! No POST!!!

There are many things that you can do to diagnose the faulty component/s.
The guide will clear things up.

Thanking you
damnor01

Feb 16, 2011 | Dell OptiPlex 330 Desktop Desktop Computer...

1 Answer

Hello ! Mu Double sight DS240WB is blinking red since yesterday. I tried to unplugged but nothing works. is it dead ?


Hi,

Your power supply board is dead, u know basic electronics’ and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.


Good luck in solving the problem....


Aug 16, 2010 | Televison & Video

1 Answer

Our TV will not come on, the standby light is the only thing that happens. We have tried unplugging everything then re-plugging but nothing changes, the light continues to blink. It blinks twice then in...


Hello,

Your power supply board is dead, u know basic electronics’ and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.


Take care.....


Aug 15, 2010 | Televison & Video

1 Answer

Nothing at the start button


with ignition on try a turn signal for they are the ground connection, if they work switch your system relay and starter relay,this is a quick way to test if the relay is bad

Nov 21, 2009 | Harley Davidson Harley-Davidson Motorcycle...

Not finding what you are looking for?
Intel Desktop Board D845WN Motherboard Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

778 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...