Question about Samsung Yepp YP-P2 Digital Media Player

6 Answers

Update problems i tried the new update on my P2, and it installed and everything.. --i followed the directions on how to "update" and it automatically turned off as it said but then after i tried turning it on the third time, it said: "Please Image Update! Update STR file. Update AUI file. Please connect to USB and update Resource File. when i plug it in to my Samsung Media Studio, it says there are no current updates. i downloaded the firmware updates and manually put them in but all this with no avail. HELP!!!

Posted by on

  • 18 more comments 
  • Anonymous Mar 01, 2008

    I have the same problem it says
    "Please Image Update!
    Update STR file.
    Update AUI file.
    Please connect to USB and update Resource File."

    evertime i turn it on ....i cant use it =(

    and when i plug it in to my Samsung Media Studio, it says there are no current updates.
    PLEASE HELP ASAP!!

  • Native_X Mar 04, 2008

    Exactly the same problem, it happend after i updated it.

  • Anonymous Mar 30, 2008

    well im connected to the internet because @ the time i was on msn, but this pop up came up on my samsung media studios screen, saying information about a new update, one that would let me delete songs straigh off my mp3 without connecting to my computer, but whenever i clicked update now or yes it just kept saying "Failed in connecting to the update server. Please retry it!."

  • Anonymous Apr 24, 2008

    I have the same problemn too, when i want to turn on my samsung player its showing, that please connect to usb to update resoure file, and than i connected, and is nothing happening, i dont no what should i do:-(( please help me,,,,sorry for my english but i am from slovakie, hello

  • C h i n 0 Apr 25, 2008

    tengo el mismo problema, cuando lo enciendo dice please conect to usb and update resource files que puedo hacer?, por favor ayudenme

  • Guran Apr 29, 2008

    firmware update got stuck.After disconnecting, reconnecting it says "update src-file" and then nothing happens. Looks like a paraplectic device to me.
    Can I get refunded?

  • Anonymous May 07, 2008

    i tried the new update on my P2, and it installed and everything..
    --i followed the directions on how to "update" and it automatically turned off as it said but then after i tried turning it on the third time, it said:
    "Please Image Update!
    Update STR file.
    Update AUI file.
    Please connect to USB and update Resource File.

  • Anonymous May 09, 2008

    same prob.

  • Anonymous May 10, 2008

    THE SAME

  • Anonymous May 18, 2008

    ...............

  • tommyjay725 May 22, 2008

    i just posted the same problem lol... didnt even see this post

  • Watty162 May 29, 2008

    I got same prob update turn back on 2nd time and get the message to update the resouce and the image

  • Anonymous Jun 23, 2008

    same thing happened it said update str image and aui

  • Anonymous Aug 08, 2008

    update resources

  • DaveB1957 Sep 22, 2008

    exact same....

  • rachelfavare Sep 30, 2008

    I just bought the Yepp Yp-P2, once I 've updatet the firmware... the only thing that the nice screen shows is: Please image updatew....blah..



    What can I do??



    Please!!!



    Thanx!

  • Ash_rebel007 Oct 26, 2008

    Similar

    For this issue

    "Please Image Update!
    Update STR file.
    Update AUI file.
    Please connect to USB and update Resource File.



    you suggested

    put the two files "ypp2.rom, ypp2.rsc" both in the root and the folder "datecasts" before you upgrade


    put the two files "ypp2.rom, ypp2.rsc" both in the root and the folder "datecasts" before you upgrade


    how do I do this when I cant access the YP-P2??

  • Anonymous Oct 26, 2008

    I get the same message what should I do?

    Please update resource files

  • system2 Nov 11, 2008

    I had the same thing happen to me, also it deleted all files on the p2.



    Fixed using this method.

  • richard5coll Nov 15, 2008

    Yes same problem on my P2 tried to update the firmware, it seems to complete but doesnt initialize. all i get now when i turn it on is connect to usb and download resource file. ! also had a Samsung tech walk me through the update procedure manually and the same thing happened. I am really choked up about this. Have not had much joy out of Samsung in resolving this problem. Now i am stuck with a dead player of no use.

    For god sake give us a solution.

×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Put the two files "ypp2.rom, ypp2.rsc" both in the root and the folder "datecasts" before you upgrade

Posted on May 10, 2008

  • jinny1492 May 10, 2008

    Don't undersand? mail jinny1492@yahoo.com

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My p2 wont update period! every time i try doing it through SMS i always get a message saying that it failed and i should retry it. when i retry it i get the same message over and over

Posted on Jun 07, 2008

Thank you!!!! iloveyou :P
hahaha couldnt use my mp3player for like a month.. :D

Posted on Oct 16, 2008

Fixed

Posted on Jul 03, 2008

Noice, its fixed

Posted on May 24, 2008

I've got the same problem!

Posted on Mar 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I Install updates for Microsoft Essentials if the Essentials Programm this refuse?


Normally Microsoft Essentials automatically updates itself along with other automatic updates to other parts of your Operating System (in your case, Windows Vista). But it sounds like there is something wrong here with your automatic settings. At the end of this advice, there will be a link to follow to give you the exact directions to follow to hopefully fix your problem. Once you get to the page this link will send you to, click on the link (in blue letters) that say "How to perform a clean boot." You will now see a circle with a dash in it and "How to perform a clean boot" inside a blue border. A bit further down you will see "Windows 7 and Windows Vista" in blue letters. Follow those directions and it should fix your problem. (Where it states that you might need "administrators rights," don't worry. Unless your computer was set-up with a specific administrator, YOU already have those rights.
Remember, follow the directions including following the links further down the same page. They are: "What is next when I have a clean boot environment" and "How to reset the computer to start normally after clean boot troubleshooting."
Another piece of advice - Print out ALL 3 sets of instructions before starting this procedure.

Nov 28, 2014 | Acer Aspire Computers & Internet

1 Answer

My yp-p2 has no audio


hi there, a fimware update may solve the problem,

you can find the installer here:
http://www.samsung.com/us/support/download/supportDownloadMain.do

to proceed, follow the instructions given in this video:
http://www.youtube.com/watch?v=QCuJ4hAfiYU

if you should not like his accent, just look up another on youtube...


good luck

Sep 06, 2009 | Samsung Yepp YP-P2 Digital Media Player

1 Answer

YP-P2 FIRMWARE PROBLEMS


have u tried the reset pin on the back? give that a go.

Feb 12, 2009 | Samsung YP-P2 Digital Media Player

1 Answer

Window Update Problem


Follow the steps below to solve this annoying problem when the Windows XP updates will download but won't install.
Make sure Windows installer 3.1 is installed correctly

Click on the following link to visit the Microsoft Download Center and download Windows installer 3.1

Download Windows Installer 3.1

Reboot the computer and try to download Windows Updates, if they still fail to install, continue with the next step.

Stop the Automatic Update Service
Click on Start, Run
Type the following command and press Enter

services.msc

Right-click on the Automatic Updates option in the Name column and click Stop
Close the Services window


Show Hidden Files and Folders
Open My Computer
Click on Tools, Folder Options
Click on the View tab
Under the Hidden Files and Folders section, select "Show Hidden Files and Folders"
Click Ok

Delete the Previously Downloaded Windows Updates
Open My Computer
Double-click on Drive C (or whatever drive Windows is installed on)
Double-click on the Windows folder
Double-click on the SoftwareDistribution folder
Double-click on the Download folder
Click on Edit on the menu bar
Click on Select All
Click on File on the menu bar
Click on Delete and delete everything in the download folder
Return to the SoftwareDistribution folder by clicking on the green up arrow on the toolbar
Double-click on the EventCache folder
Click on Edit on the menu bar
Click on Select All
Click on File on the menu bar
Click on Delect and delete everything in the eventcache folder


Restart the Automatic Updates Service
Click on Start, Run
Type the following command and press Enter

services.msc

Double-click on the Automatic Updates option in the Name column
Click on the Start button under Service Status to restart the service
Select Automatic under Startup Type to start the service each time Windows starts
Click Ok
Close the Services Window

Download the Latest Version of Windows Update Agent

Click on the following link to download the latest version of the Windows Update Agent and save it to your desktop.

Oct 18, 2008 | Televison & Video

1 Answer

Radio


It’s very easy, first of all you have to check your firmware I think you will be using older virsion so update it by connect your player with PC wile your internet will be connected also & Emodio(Samsung media studio new version)must be installed to your pc it will automatically update your firmware 5.8 & then check in radio option then you will easily know how to record from fm radio & u will also surprise with many more new options like games etc Hope your problem will be solve

Regards,
Shahzad Riaz
Shahzad_riaz2002@yahoo.com

Aug 22, 2008 | Samsung YP-P2 Digital Media Player

1 Answer

Can install new firmwire


1. Download Winrar here, its a freeware, this will help you open the file

2. Download the firmware here, the newest one is 4.13

3. Unzip the firmware file and select "extract to" using winrar, just extract it to the "desktop"

4. After the 2 files are extracted from the folder, select both of them, right-click and select "cut"

5. Now, go to "My Computer", double-click "P2" (that's the MP4 player) and double-click "internal storage", now, in this directory, "Paste" the 2 files you "cut" earlier, once the files have been successfully pasted (look at your PC screen and MP4 player and make sure nothing is transferring), exit the window, unplug the MP4 player and power it on, the player will be updating and turning of a few times, but once its of, turn it back on until the whole process is finished.

May 22, 2008 | Samsung Yepp YP-P2 Digital Media Player

3 Answers

YP-P2 FIRMWARE PROBLEMS


I had the same problem!

But I found the fix for it after much searching.

First, download the latest firmware directly to your computer's desktop from the Samsung website: http://tinyurl.com/3j4su4

The file is a Zip one so : make sure you extract the 2 files to your desktop!

-Connect your P2 to your computer and go to My Computer.
-Double click the YP2 icon.
-Copy the 2 extracted files from your desktop into the open window. (Do not put them in an already existant folder).
-Unplug the connection from your computer and restart your player.
It will do an update and shut down. Restart it a second time and it will finish the second update.
- There you go, it should work no problem.

The firmware update from having your player connected to the Samsung Media Studio 5 for some reason doesn't work properly.
By doing in manually it works just fine.

The update link I provided is for a US based player.
Just go through the Samsung site to find an update for other contries if you need too and follow the same directions I give above to solve your issues.

Hope this helps!!!

May 17, 2008 | Samsung Yepp YP-P2 Digital Media Player

1 Answer

Card slot won't read p2 card


Hi,
have you thought about restoring your system, to an earlier point.
before the problems occured, with your software update.
also if this fails, or you are unable to acheive this.
check in the device manager, to see if you have any yellow exclamation marks, next to your device.
you may need to re-install the device/driver for your card-reader.

Mike @ compurepair.

May 10, 2008 | Electronics - Others

1 Answer

Dark screen problem (after installing updates)


its probably just the movie some of my movies turn out way to dark to watch because i picked a bad program or the wrong one sometimes they give a list of the same movie and check the reviews

May 07, 2008 | Samsung Yepp YP-P2 Digital Media Player

3 Answers

P2 player


The video formats have to be in .svi thats the only format the player can pick up, emodio or the media player should do this. If not you could try to download a file converter and convert them into the right format maybe.

Dec 26, 2007 | Samsung Yepp YP-P2 Digital Media Player

Not finding what you are looking for?
Samsung Yepp YP-P2 Digital Media Player Logo

Related Topics:

847 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...