At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
C0500 code in bizhub 210/ 162 is heater code,
and it can be solve by pressing the stop button and turn the machine on, dont release the button until themachine reset the code.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
For reset after press the microswitch hole wait when appaire * on display in left center area and then press 3 and press trouble reset.If dont work verify the fusing heater lamp,thermosuse continuity.
Fuser unit malfunction code.Check the fuser unit parts:heater lamp continuity,thermofuse and thermostat,clean ar change.Enter in the service mode Stop -0-stop-1 open the front door,push the reset service buton (located in the up left side,open the windows),close the front door,and get started.
The fusing unit malfunction code.Clean and measurement the continuity of the heater lamp,thermistor and thermofuse.To reset press the service button.Please tell me the copier model for more information.
On the right side of cotrol panel there is small hole press it with clips .On the screen appear small dot press it then press 3 then apear screen chose from it troble reset .
This error code indicates low temperature at warmup.Can somestime be reset IF you can find the reset switch.On earlier models it was behind a small panel on the innards of the machine after you open the front door.Good Luck!
locate a pin hole on the right side of the disply panel,and use a paper clip,be very gental and depress it and wait for a samll dot on the left side of the disply panel,as soon as you see it press #3 and than a menue well pop up look for trouble reset botton and turn machine off from the main switch and back on
good luck
×