Question about Sharp Aquos LC-42D62U 42 in. LCD HDTV

2 Answers

Color pulses after LC-37D62U has been on a while

Recently bought a 37" Sharp Aquos, and am very happy with it except once in a while, after changing channels or fast-forwarding a video, I get pulsing/flickering in the primary colors on the screen (white and black don't pulse, it's worst with reds and blues). Does anyone know if this is a problem, or typical for an LCD TV?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine does the same thing. It's under warranty. Do I call and local place and have them come out? no way can I move that thing by myself. thanks for the help!

Posted on Aug 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 103 Answers

These sets are notorious for bad inverter boards and bad video processor boards.Sharp is well aware of the problem,and will fix the units if you push the issue.

Posted on Mar 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need Aquos LC-37D43U firmware


If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

Apr 04, 2014 | Sharp Aquos LC-37D43U 37 in. LCD HDTV

1 Answer

Sharp LCD tv model 37d62u only half screen is working


You have a flew tab issue ( where the circuitry attaches to the screen) which is located under the screens top frame section. Or there could be a blown resistor or didode on the small board the flex tab attaches to also underneath the top frame section of the screen assembly

Dec 16, 2012 | Sharp LC 37D62U 37 in. LCD HDTV

1 Answer

LC-37GB5U Screen color not right... had no on screen display, but once it warmed up it started working.


common problem in the t-con board. you can also check for a leak capacitor at the power supply board.

Oct 07, 2012 | Sharp AQUOS LC-37GB5U 37" HDTV LCD TV

3 Answers

My sharp LC-37d62u display problem


This problem very common in sharp tv.The POWER,OPC flashes.First turn on have power LED indicator light stable at all? Tries the power again couple times will have backlight come back on,than it will work.Not at all more than 5-6 times than ur main turner signal board is the problem,must replaced.

Jan 05, 2010 | Sharp LC 37D62U 37 in. LCD HDTV

1 Answer

Sharp Aquos LC-37D62U Audio Warning


Usually the settings can't be turned off and the audio settings are searching for whatever is being outputted from the program itself whether mono or stereo. It is nuisance I know.

Jun 28, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Volume and channel control on TV not working


The control board is defective. Is in warranty so call Sharp to have it fixed.

Dec 29, 2007 | Sharp LC 37D62U 37 in. LCD HDTV

1 Answer

I have no color on my 37 aquos sharp lcd


Give more info. In tuner mode, in component,rca or s-video input?

Dec 07, 2007 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

1 Answer

37" aquos


It sounds like it may be n demo mode. Check the inbuilt menus and check this is turned off.

Nov 24, 2007 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

Not finding what you are looking for?
Sharp Aquos LC-42D62U 42 in. LCD HDTV Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68250 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Sharp Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...