Question about Microwave Ovens

2 Answers

I have a JVM1650BH01 GE Microvave. I go to use it and after the 2-3 seconds the microwave shuts off and resets. No error message just a reset clock.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

Replace the smartboard main pcb part# WB27X10382. if the unit is under warranty contact GE for the nearest warranty repair place.

Posted on Feb 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

It sounds like you have a short in your microwave causing it to trip it's safety breaker. In cases like this it's usually less expensive to replace than to attempt repair, and it's not safe to open your own microwave's enclosure to try to do it yourself.

Good luck!

Posted on Feb 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge jvm1650bh01


Hi, You need a new Magnetron gun installed in the microwave.
It is burned out and needs to be replaced. You will have to call GE for parts. Good luck.

Jan 13, 2014 | Microwave Ovens

1 Answer

GE microvave is not heating up and is very loud. Saying sensor error. We unplugged it for a few minutes and tried the hard reset. This did not work.


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101 =-=-][

[]

Jul 11, 2011 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

MY GE SPACESAVER MICROWAVE MODEL JVM-1653-SHO-1 SHUTS DOWN AND TELL YOU TO REPROGRAM THE CLOCK BUT YOU RESET USING ALL INSTRUCTIONS I INSTALL COOK TIME PRESS START IT WILL COME ON FOR 3 SECONDS AND SHUTS...


This is magnetron-related.

See
this FixYa solution (solution #2) even though your model number is different.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jun 19, 2011 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

How can a ge spacemaker microwave can be reset?


the only way to reset the unit is to shut power off for approx. 15 seconds or unplug the unit for the same period... if this doesnt reset it you have a problem with the control in the unit that will have to be repaired.

Jan 03, 2011 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Microwave starts and runs 2 seconds and stops. Display is jibberish. After resetting date and time, it will again run 2 seconds and then shuts down again.


See this FixYa solution. even if your model number is different.


We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Oct 26, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Ge spacemaker jvm1650sh01 starts to microwave then loses power


See this FixYa solution.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 27, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

2 Answers

Model JVM1650WH02 will shut off about 2 seconds or less into cook time. everything else works such as light and clock and sometimes the wave will cook.


magnetron is leaking internally, do not use until magnetron is replaced. the mag creates interference with the control board and resets it

Feb 05, 2010 | GE JVM1650 1000 Watts Microwave Oven

1 Answer

Whirlpool Microvave Vent Model GH7208XRQ


It's better to reply back instead of starting a new thread.

Unplugging it for a while and then plugging it back in is how you reset it.

I put in a message to Whirlpool technical to see if they can tell me what this code is. I'll reply back when I find out.

Mar 19, 2008 | Microwave Ovens

3 Answers

GE over the range Microwave shutting off


This is often due to a defective or loose magnetron causing electrical interference and disruption in the control circuit board.

If your magnetron was recently replaced, it may have loose mounting nuts or bolts or the wire mesh RF gasket was not installed or got pinched.

It may also need a new high-voltage diode and stirrer, and the cavity may be affected.

GE had a campaign (but not a recall, mind you!) covering several models.

Details are in their bulletin at http://207.234.249.73/mwd/ge_mw_mag_kit_bulletin.pdf

The parts kit (that GE used to pay for) is part # WB27X10489 and is shown in the photo here:

http://207.234.249.73/mwd/wb27x10489_ge_mag_stir_kit.jpg

If you or a friend decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

You can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

You say this is only 2 years old? I thought these models were much older... GE may cover it, but you'll have to contact them.

GE Customer Service is at http://www.geappliances.com/service_and_support/contact/

We're happy to help and we appreciate your thoughtful rating of our answer.

Jan 08, 2008 | GE JVM1650 1000 Watts Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...