Question about Blenders

2 Answers

Osterizer Blender This is one of the old commercial blenders (20 years) now it is making a strange shrill noise and is not doing anything more than swirling the liquid around (not blending ingredients) and is leaking out the bottom. I have tried putting in a new gasket.

Posted by on

  • Anonymous Mar 28, 2014

    makes noise spinning not blendiing ingredients

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

You can replace the Osterizer "Standard Blade Assembly" (which includes a new rubber gasket) without buying a new and expensive glass jar. See http://www.householdappliance.com/blenderparts.html or one of the other appliance repair parts websites. After 20 years of use, it's time for a new blade and bearing.

Posted on Dec 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 79 Answers

Sounds like the bearing of the blade shaft is worn out. Liquid can be leaking out around the shaft. And a worn bearing will make nasty noises while running slower than it should.

Depending on how this unit is made, you may have to replace the whole pitcher assembly.

Posted on Mar 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GASKET ON MY MIXER MODEL # 362490 WAS CHEWED UP, NEED A NEW ONE ONLY TWO WEEKS OLD!


we can not assist you with this we did not sell you the blender as we sell no products .try the proper website .

Jan 12, 2016 | Blenders

1 Answer

Where to buy glass jar for my osterizer pulse matic blender 10 speed


Try "The Gourmet Depot" website or search "small appliance parts" and find a site that carries the Oster blender part. You will need the model # of the blender.

May 20, 2010 | Oster 006832000000 10Speed Blender

1 Answer

Leaking from the bottom of the glass container through the screw


Check the rubber gasket for damage or hardening and also for chipped glass on the sealing surface. Make sure the ring is not cracked causing loss of compression of the seal.

Also check that the leak is NOT at the shaft seal. Replacement parts should be readily available,

Nov 08, 2009 | Oster 4093-8 Osterizer Classic Blender...

1 Answer

My blender stopped smells like plastic


your triac module has shorted on the circuit board

Sep 23, 2009 | Oster 4093-8 Osterizer Classic Blender...

1 Answer

Connection between the motor and the blender unit (where the spinning takes place) - get extremely hot and blender does not seem to blend well. Motor works fine without the top - and the top seems to spin...


Replace the blade assembly immediately. They are available from Cuisinart's website. Sugars and other stuff can gum up the blade assembly over time, so it will periodically need to be replaced. A quick and easy way to keep the blade assembly clean and working longer is to put water and a drop of dishwashing soap in the blender after use and run the blender at low speed for 15-20 seconds - an old Osterizer trick.

Jul 15, 2009 | Cuisinart CBT-500 SmartPower Premier Work...

1 Answer

HOW DO I REPLACE THE FUSE ON AN OSTER BLENDER MODEL 4094


unplug it.... use a small plastic screw driver or even a metal one if you are careful... pry gently up on one side of the fuse... it should pop out of the holder. when it does... use your fingers to grab the end and pull up. the fuse is replaced by placing it back into the holder and pushing down until each end pops back into the holder

Apr 11, 2009 | Oster 4093-8 Osterizer Classic Blender...

1 Answer

Poor function of my Oster classic blender


Yeah, the blades probably need to be replaced. The replacement blade assemblies for most models can be ordered directly from Oster - their phone # is 1-800-334-0759 - you have to go through an elaborate menu tree to get to the right place.

Apr 03, 2009 | Oster 4093-8 Osterizer Classic Blender...

1 Answer

Need a schematic diagram for a kitchen blender


I think this will help a bit (p.2 only), although it seems a little crude to be a full service manual - this is a service manual for an Oster "Osterizer" Blender - one of the classics:
http://www.villaware.com/manuals/ProductService/Service/Sunbeam/4112.8.pdf

Here is one for a Philips blender, but once again, not as detailed as I've ever seen:
http://www.eserviceinfo.com/download.php?fileid=27616

These are the free one I could find. Generally, an authorized servicer is not allowed to distribute a full service manual, so you normally have to pay someone to get a complete service manual.

-Tha Mp3 Doctor

Mar 31, 2009 | Philips Blenders

2 Answers

Osterizer


Thanks to some good leads, I determined the cause of the problem and ordered a part. Hopefully, that will resolve the problem.

Apr 23, 2008 | Oster 4134 / 4126 Classic Beehive Work Top...

Not finding what you are looking for?
Blenders Logo

Related Topics:

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blenders Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

eyecam

Level 2 Expert

86 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...