Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

X box problem

We are using 2 xbox 360s and on one when on a game it shows a map of where you r but it isnt showing up on one of our tvs and sometimes the game is freezing when both are on line we r using thewireless g mimo router

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes it was the tv ot the router thanks anyway

Posted on Feb 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i unlock my net gear router?


If you mean reset to default settings. Push and hold the reset for 30 seconds or so and release.

Jan 05, 2013 | Routers

1 Answer

Your gamer profile does not have the correct permission to access X box live functionality.What is this? What I need to do? I cannot play in my game Thanks. Regards, zanna


Hi Zanna,

What i suggest for you to is:

1) check the parental control of your XBOX LIVE settings.

2) check your XBOX LIVE subcription.

3) check your profile. and game profile.

4) contact XBOX LIVE SUPPORT for further verification.

just feel free to send a question.

Apr 10, 2011 | Routers

1 Answer

How do I get two xbox 360s to have an open NAT on a Cisco Linksys WRT160N V2 wireless router?


you need to setup both your xboxes with a static IP address for example
192.168.1.50 xbox 1 192.168.1.51 xbox 2
on your linksys router you will need to setup port forwards for both xboxes

Click the Applications & Gaming link near the top of the page.

You should now see a new menu. In this new menu, click Port Range Forward.

requires you to forward the following ports: 53,80,88,1863,3074

Mar 30, 2011 | Cisco Linksys E1000 WirelessN Broadband...

1 Answer

I keep getting kicked off of xbox live while playing games..


keep xbox away from any carpet/rugs static electricity place xbox on an anti static mat/bag or a piece of newspaper also make sure there are no electrical wires showing from the leads leads that attach to the xbox
hope this helps

Oct 31, 2010 | ASUS RTG32 Router

1 Answer

Can't play xbox 360 and have computer onlin on Netgear Router


1. If this is wireless I would try position the game box closer to the router or hard wire to the game box if possible.
2. You also may have a problem with bandwidth. The other computer is competing with your Xbox for bandwidth and the switch may not be able to supply it to both the device at the same time.
3. check if your router to see if you have QOS ( quality of service). Log into the router and check this feature to see if it is enabled.

May 30, 2010 | NetGear WGR614 Wireless Router

1 Answer

Internet light keeps blinking. sometimes all four


You may need to reset the router (your son's computer may have a virus or spyware, run the anti-virus program on it)
At the back of the Linksys Router you will find a reset button press and hold it for about 30 sec. (Make sure you are holding the button properly.),
it will reset all the settings of the router.
After that reboot the router, connect your computer with port no. 1, and then try to open 192.168.1.1 from the Internet explorer of your computer.
It will give you a message "The server at 192.168.1.1, WRT54GS require a USER NAME and Password.”
Now type "admin" in the password and it will take you to the LINKSYS ROUTER SETUP


Hooking up an Xbox with Linksys routers:

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...

Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" sub tab...

1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...

3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...

4) Click on set-up and change the MTU Size to 1452 and click Save Settings...

5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox

IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...

6) Also assign the DNS Addresses on the Xbox

Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1

7) Turn off your modem, router, and Xbox...Wait for a minute...

8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


Jun 20, 2009 | Linksys WRT54GX2 Wireless-G Broadband...

3 Answers

Change NAT to open


Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...

Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...

1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...

3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...

4) Click on set-up and change the MTU Size to 1452 and click Save Settings...

5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox

IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...

6) Also assign the DNS Addresses on the Xbox

Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1

7) Turn off your modem, router, and Xbox...Wait for a minute...

8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect... Kudos! Thanks! If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 05, 2009 | Linksys Wireless-N WRT150N Router

1 Answer

1 linksys wrt54gs router 2 xbox 360's and a not open nat setting


connect the 360 to a port in the router and have the internet going straight into ur router ull stay connected at all times as soon as u turn on the xbox itll log on automaticly

Feb 21, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

I purchased A WIRELESS N ROUTER AND ALL OF MY CONNECTIONS ARE NOT


Move it closer to the router.
Or plug your ethernet cable into your laptop and into your xbox.
In Network connections, bridge your wireless and localarea network.

You will get connection now, turn your PC on every time.

Jan 13, 2009 | Linksys Routers

1 Answer

How do I turn NAT from strict to open on a 2.4GHz router


sir try to view your router using the web base configuration, locate the NAT configuration and enable DMZ function. it should open all ports with your xbox

Sep 01, 2008 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...