Question about Phones

3 Answers

Need config settings to use ZyXEL P2000W WiFi handset on Net2Phone account

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 788 Answers

Here is a list of handsets that net2phone works with: http://www.net2phone.com/partnerships/product/broadband/compatibility.asp

Zyxel is not one of them. Sorry.

Posted on Feb 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

Using the instructions in the user guide for your phone, you should be able to connect with these settings:

Registrar IP/Outbound Proxy: sip.net2phone.com OR byod1.net2phone.com

There are also username and password fields, fill them out with your net2phone account data.

Good luck!

Posted on Feb 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

Click HERE for the user manual you will find how to configure the settings step by step.

Once you are at the site just scroll down and enter the code shown in the box above it,then click download.

Goodluck..

Posted on Feb 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When programing our incoming phone message this is a lot of static on the message which makes the message hard to hear. How do we correct this issue?


Cordless land line phone:

  • If it is possible to set the greeting from the base speaker phone, use that.
  • If the base does not have a VOX speaker, move the handset and the base away from anything that emits elelctro magnetic RF...like wifi access points, microwaves, etc and set the greeting.
Cell Phone:

  • Avoid using the handset to set the voice greeting unless your handset supports a visual voicemail service that captures the audio greeting first and then sends the audio file over the IP.
  • Call your cellphone# from a landline, hit # or * and your PIN, and access the greeting menu from there.
  • If your cellphone and carrier support Wifi calls, VoLTE or Packet switched voice service, set your handset up for hat feature. On an iPhone it looks like this:

25849679-hkemfq0ys4r4xfoe53z05qve-4-0.jpeg

25849679-hkemfq0ys4r4xfoe53z05qve-4-2.jpeg

25849679-hkemfq0ys4r4xfoe53z05qve-4-5.jpeg

Sep 04, 2015 | Phones

6 Answers

Busy signals on all handsets, cannot call or recieve calls


Are you refering to a cellphone or a landline phone

Sep 13, 2008 | Phones

1 Answer

How to get incoming calls to two handsets


The system should be configured so that the desired lines, whether CO or extensions, are set to "Appear and Ring" on each set.
Config... Terminals&sets... Show Set... (enter #)... Find...Line Access... Line Assignments... Show Line (enter #)... set to "Appear and Ring" on each set that needs to ring.

You can also have a line "Ring Only" without an appearance (dedicated button), in which case it will show as an intercom call.

Sep 25, 2014 | NorStar T7316E Telephone

1 Answer

Why does my Phone handset says no link to base please check base?


Charge handset

Make sure there are not other signals interfering with the phone (wifi router).

Check to see if base and handset are on the same channel.

Aug 02, 2014 | BT Synergy 6500 Cordless Phone - DECT -...

1 Answer

Can the phone line be dead and the internet still work


Simply put no, but you can pick up wifi from other sources to get free broadband, if you are close to certain areas there are free wifi hotspots. Libraries, Macdonalds etc.

Aug 01, 2014 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Hi i have forgotton my pattern on my sony ericsson xperia x10i and also my google account please can you help?


1. Go to www.omnius-server.com register and download omnius

2. Fire it up and enter your username and password in settings

3. Connect phone end of cable into handset (handset switched off)

4. Select x10 from handset drop down list

5. Select unlock from top options in Omnius

6. Hold back button on Handset and connect PC end of cablee to PC/Laptop.

Mar 10, 2011 | Sony Phones

2 Answers

Nortel M7310 Phone moved to another jack, now no incoming calls


you need to go to your previous location and get the jack number, than go to the new location and get the jack number. now go to the phone system closet and look for these cable numbers on the 66 blocks. Swap the cross connect of the jacks and wallah your phone will be your s again! ldtnsj.com

Jan 20, 2009 | NorStar M7310 Corded Phone

1 Answer

I have a samsung d900i mobile fone which is t-mobile, i've had it unlocked to take my vodafone card but can't use wap.


I expect this will be becuase the wap/gprs settings that are on the handset will still be the t-mobile ones. Simply unlocking the phone doesn't change these. If you know what the settings are you will need to create a new data account for this to work. If you don't have the settings, you'll need to get onto vodafone to get the settings. A call to the customer services should do the trick. The d900i still being a relatively new handset should mean that they are able to send you the settings in a sort of text message - meaning no work required - bonus!!!

Hope this helps.

Mar 15, 2008 | Phones

3 Answers

How do I add an extension handset to my current config?


IF it was a used handset it was likely registered to another base. I just switched bases (1line to a 2 line base). I had to "deregister" the handsets from the old base. I am not sure if you can deregister if the old base is not present? With the old base plugged into power I hit the "function key" at the bottom left of the handset and scrolled down to initial settings. Under registration is "deregistration". I selected that and it put the handset back to its default out of the box. Then simply hit the mute button on the New base and OK on the handset. Worked for all 5 of my old handsets.

Hope this helps

Jan 27, 2008 | Panasonic KX TGA270S Cordless Expansion...

Not finding what you are looking for?
Phones Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...