Question about Kidde Nighthawk Combo Gas/co Detector

2 Answers

Kidde Carbon Monoxide Alarms

I HAVE KIDDE CARBON MONOXIDE ALARM MODEL NUMBER KN-COB-B
AND AM GETTING A REEDING OF 234PPM .

SHOULD I BE WORRIED WITH THIS REEDING?

Posted by on

  • 1 more comment 
  • Anonymous Dec 07, 2008

    it is reading error and 247

  • redngale Jan 29, 2009

    I also have a kidde carbon monoxide alarm, model KN-COPP- 3 and was also wondering how to start/set the unit to work

  • Anonymous Mar 12, 2014

    9y4 error on my kidde co alarm

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

YES!!!! If this unit is working properly you should not be in the house. Maximum allowable safety level for an 8 hour period is 50! If you think it's working properly call the fire department! This will cause dizziness,nausea,etc. Let your fire department find the problem! If you don't believe me follow this link to owner's manual but do it quickly: http://www.kiddeus.com/utcfs/ws-384/Assets/KN-COB-B(9CO5)en.pdf

Posted on Mar 13, 2008

I have a kidde carbon monoxide alarm, model KN-COPP-3.
No instructions. I was wondering how to start/set the unit to work?
Darlene

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have model kn-cob-lcb-ca...it does not have a digital display, it was made in 2009..a few nights ago it started beeping...4 beeps, 5 second pause then 4 beeps continuously..the manual says this is a...


send the detector back and have it replaced,
The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding levels of CO: 70 ppm CO Concentration 60 - 240 minutes 150 ppm CO Concentration 10 - 50 minutes 400 ppm CO Concentration 4 - 15 minutes The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alarm pattern will be four (4) short beeps - followed by five (5) seconds of silence - followed by four (4) short beeps. The unit shall incorporate 2 LED's. A green LED will be illuminated to indicate the alarm is operating properly when plugged into an outlet, and will flash every 10 seconds when on backup battery power. A red LED will flash to indicate that carbon monoxide has been detected until the device is reset or CO is eliminated or will flash to indicate low battery or alarm malfunction. The unit shall at a minimum meet the requirements of CAN/CSA 6.19-01. It shall also include a 10-year manufacturer's limited warranty or

Test/Reset Button - Tests the unit for proper operation. Resets the carbon monoxide alarm.
• Tamper Resist Feature - If activated, unit goes into constant alarm mode if it has been unplugged or has come loose from the outlet.

Sep 20, 2011 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

I have a Kidde Nighthawk Model KN-COB-DP-H that was in an alarm mode with intermittent audible alram evry 25-30 seconds. Could not reset the unit. Cannot find user's guide for details on how or what to...


You can get help at

https://portalgb.knowledgebase.net/display/4/search.aspx?tab=search&c=15121&cpc=i830o4bbvC82cRVePyldWo3I&cid=12758&r=

It is the Kidde help center.

Feb 26, 2011 | Kidde 900-0193 Ac Powered Plug In W/...

1 Answer

Nighthawk carbon monoxide alarm model number KN-COPP-3 err beeping every 25-30 seconds, I replaced battery they still beep. They say to seek users guide, which can't be found. It seems to have started...



1. Change batteries.
2. Clean it.
3. Swap it with another location if you can.

If it still does not work properly consult the local fire dept. for free.

You may have to take it in repairs if all fails.

Nov 08, 2010 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

How can I shut off my Kidde carbon monoxide detector when beeping


Here is the link to the manual for your Kidde model KN-COB-LCB-A
Carbon Monoxide Detector. This may help you solve your issue.

You may find more related information on my website. If you need a replacement or you need to add additional Carbon Monoxide Detectors in other levels of your house, you can purchase them here.

This issue should be solved immediately, Carbon Monoxide Poisoning can only be avoided by making sure you have good working CO Detectors in your house, camp or recreational vehicle.

Jul 24, 2010 | Kidde Nighthawk Combo Gas/co Detector

3 Answers

My Kidde Model # KN-COEG-3 keeps going off and lists 217 now 205 now again 217 and this is with the door open and fresh air coming into my place ??


I took the following from the Kidde website. They only answer the phone Mon-Fri, from 8-5, EST. I checked it out because my almost new Kidde CO detector is showing an Error code.
The next time your carbon monoxide alarm has ERR on the display, push and hold the Peak Level button.You will see an E and an O followed by a number.Contact our hotline at 1-800-880-6788 and provide us the error code, along with the model number, assembly number and date of manufacture from the back of your unit.If your unit is under warranty, a replacement will be mailed to you.

Nov 21, 2009 | Kidde Nighthawk Combo Gas/co Detector

3 Answers

My CO detector is chirping every 30 seconds or so, there is no battery to change and receiving error code 09


depending on what model number you have .. if its a model kn-cosm-b then is actually has 3 AA batteries inside ... the model kn-cob-lcb-a, while it runs on 120 volts, still has a 9 volt battery inside .. in fact most models have a battery backup so that they still work if there is a power outage .. the chirp indeed tells you that the backup battery needs changing .. if you cant find the battery give us the model number and we can help ... sometimes they are hard to find ..

Nov 05, 2009 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

Carbon monoxide is on


When a Carbon Monoxide Detector alarm goes off, you should follow the procedures that came with the manufacturer manual. Even when the alarm sounds, you cannot smell, taste, or see this dangerous silent killer known as Carbon Monoxide.

Have your house checked by your local fire department for possible levels of CO gas readings. If this all checks out, you can go online to Kidde Nighthawk website and find the manual for your Carbon Monoxide detector model.

Hopefully, you found your solution since you posted this question back in Dec, 2008. Go to my website to read industry information and to view most Brands and Models of Carbon Monoxide Detectors.

Dec 16, 2008 | Kidde Nighthawk Combo Gas/co Detector

3 Answers

What does an err code E03 mean?


the sense is bad, unfoturally the unit need to be replaced.

Nov 24, 2008 | Kidde Nighthawk Combo Gas/co Detector

9 Answers

Carbon monoxide detector err code


Detecotrs have a limited lifespan of 5-7 years. So sounds like you need new one (It's not worth to buy just a sensor). Take a look on amazon: Amazon com Carbon monoxide detector (watch out on reviews). I hope this was helpful. cheers

Aug 13, 2008 | Kidde Nighthawk Combo Gas/co Detector

Not finding what you are looking for?
Kidde Nighthawk Combo Gas/co Detector Logo

1,276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kidde Surveillance Cameras Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

 Mikey
Mikey

Level 3 Expert

4718 Answers

Tom Chichester

Level 3 Expert

24698 Answers

Are you a Kidde Surveillance Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...