Question about Pioneer PRO-200 60" Rear Projection Television

2 Answers

My pioneer elite

Well i dont know what is wrong with but one of the fuse is missing it is 8amp125 volt well i live in colorado and cant find the fuse i tried everywhere and they told me that 8amp 225 volt would work i tried it and it blew well i dont know what is wrong with it

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

Did you own this set when the original fuse blew? Did it look like "explosion under glass"? Did the new fuse look the same as the old when it went? Or did both fuses look as though the filament just "sagged apart"? Anyway, sounds as if you've at least got a regulator problem, all the way to the possibility of a bad transformer...accordianman

Posted on Feb 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 395 Answers

If the fuse blows after replacing then there is a short cicuit inside the set. most likely a diode has shorted in the power supply. check the bridge rectifiers for short and any transistor in the power supply.

Posted on Feb 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello how do i set the convergence manualy on a pioneer elite pro-710hd projection tv i dont have the remote and dont know how to bring the menue up on the tv


You MUST have the remote to perform service operations on the Elites. Look on ebay or do a google search for Pioneer 710 remote.
There is no way to manually do convergence without a remote, and no way to call up the convergence menu.

Feb 05, 2014 | Pioneer PRO-710HD 64" Rear Projection...

1 Answer

I was given a pioneer tv sd-p5575 and i dont have


MY PROBLEM IS ANTIVIRUS IX DIRTY AND NEW ANTIVIRUS

Dec 06, 2009 | Pioneer Projection Televisions

1 Answer

Just got a pioneer elite pro 119 from a buddy of


If you don't mind opening the thing, open it up and follow the power lead inside the TV. Somewhere along the line should be a fuse. I'd start there.

Oct 06, 2009 | Pioneer PRO-119 60" Rear Projection...

1 Answer

All my inputs create a rapidly rolling screen.


EITHER you have bad filtor capacitors in 5 & 9 volt circuits or you have bad electrolitic capacitors in vertical circuit. J.D.W.

Jun 18, 2009 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

Power problem on Pioneer Pro-700HD


The failure is not on the power supply but the convergence amplifiers STK ICs have the 24 volts shorted.
If that fuse is blowing, de-solder the convergence ICs and put a new fuse to power up the TV; you should see distorted video when the TV powers up and the fuse should not blow.
The service manual migth not help much in this case since the failure is easy to pin point.

Good Luck.

Oct 03, 2008 | Pioneer PRO-700HD 64" Rear Projection...

1 Answer

Problem with pioneer elite pro-99


We are having the same problem of the Pioneer Elite Pro-99 turning itself off all of a sudden. The red 'non' power button comes on as if we had turned it off remotely.
We would love to resolve this. If you can help let us know.

Jun 30, 2008 | Pioneer PRO-99 TV

1 Answer

Pioneer Pro-118 won't turn on


Take off back cover. The problem power board is to the right of the board where the power plug feeds into the TV. There is a large white fuse right bend the power plug. With a meter it read ok; about 8 inches deeper into the TV on that board was the resister next to two fuses. My 4 amp 125 volt fuse did not read on my meter. After replacing, it worked fine. Check all three fuses while you're in there.

Feb 12, 2008 | Pioneer PRO-200 60" Rear Projection...

3 Answers

Pioneer Elite PRO 710HD 64" rear projection tv


You could get the old one and have them match it up. If not try www.pioneerservice.com

Sep 17, 2007 | Pioneer PRO-710HD 64" Rear Projection...

Not finding what you are looking for?
Pioneer PRO-200 60" Rear Projection Television Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

zorbrack

Level 1 Expert

19 Answers

Are you a Pioneer Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...