Question about HP Integrity rx4640 Server

1 Answer

ILO light constant amber - cannot connect to iLO via LAN or serial connection

We lost the MP password to our rx4640 server.
I tried to reset it, held in the MP reset button for 4 seconds like the manual said, but now the amber light next to the reset button is constantly on and I cannot connect at all with either serial or LAN cables.
Any suggestions on what I did and how to fix it? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hi there ,
If your server is working then go to the the back side of the server and notedown the hardware id of the ilo then in the pc connected to ilo typr ARP -s hardware add then the ip you want to assign then ping the add mentioned by you if it replies the try with this ip add

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset brother mfc8880dn


If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps. Before you factory reset the print server, we recommend that you print a configuration page before resetting the print server.
<For BRAdmin Professional ver.2.xx Users>
Start the BRAdmin Professional utility, by clicking Start => All Programs or Programs => Brother Administrator Utilities => Brother BRAdmin Professional Utilities => BRAdmin Professional.
  1. From the main BRAdmin screen double click the appropriate printer.
  2. Enter the print server password (The default password is "access").
  3. Click the Control tab
  4. Click the Restore Factory Defaults button
  5. Click the OK button when you have read the warning message.
  6. The print server will then reset back to its default values.

bradminsc.gif
<For BRAdmin Professional ver.3.xx Users>

  1. Start the BRAdmin Professional utility, by clicking Start => All Programs or Programs => Brother Administrator Utilities => Brother BRAdmin Professional 3 => BRAdmin Professional 3.
  2. From the main BRAdmin screen double click the appropriate machine.
  3. Enter the print server password (The default password is "access").
  4. Click Network Configuration tab, Control Panel and select Set Default.
  5. Click on Submit button.
  6. The print server will then reset back to its default values.

    bradmin4.gif
Via a web browser
Because web based management requires the TCP/IP protocol for communication, any reset option you see when managing the machine with a web browser, will not reset the IP address details that are set. If you wish to totally reset all the print server parameters we recommend you reset the print server by using the BRAdmin application.
To reset the print server (excluding TCP/IP parameters) follow these steps:
  1. Connect to the printer using a web browser.
  2. Click Network Configuration.
  3. Enter the print server password (the print server password is detailed in the user guide for the print server) if it's applicable.
  4. Click the Set Default link or Reset Print Server.
Via the control panel (only for network ready models)
  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable).
  2. Press the Menu or Menu/Set key on the control panel.
  3. Press up or down navigation key to select LAN or Network and press Set, Menu/Set or OK.
  4. Press up or down navigation key to select Factory Reset or Network Reset and press Set, Menu/Set or OK.
  5. Select Reset.
  6. Select Yes.
  7. The machine will re-start, re-connect cables once this is complete.

Jun 19, 2014 | Brother Office Equipment & Supplies

1 Answer

ILO LAN ip address reseting


Yes you can reset the IP Address of the iLo when the server is up. Log onto the iLo itself as an administrative user and select administration --> Network.
This will reboot the iLo itself, but the server will be unnaffected.Later you can check from IP-Details.com to see your IP address has been changed

Mar 15, 2014 | HP Compaq ProLiant ML350 G5 Server

4 Answers

How to reset administrator password on windows server 2012 raid server? My computer is HP HP ProLiant ML110 G5 with raid 10. I have try to use Chntpw to reset the lost password, but it cannot detect my...


Which operating system ??
The Hewlett Packard ILO (Integrated Lights Out) tool lets a network administrator connect to a remote Windows Server system.
This process enables the administrator to perform troubleshooting and problem fixing as if the server were connected locally.
If the password of the account used for connectivity becomes corrupt, it can be reset from within the Windows interface.

Log on to a Windows computer that has a connection to the HP ILO.
Click the "Start" button. In the "Search" box, type "lusrmgr.msc."
Press "Enter" to open the User Management console.
Double-click "Local Users and Groups."
Click "Users."
Scroll down to the HP ILO user account.
Right-click on it. From the drop-down list, click "Set Password."
Type in a new password.
Click "OK."


http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-you-forget-your-Windows-password
http://h18000.www1.hp.com/products/servers/management/remotemgmt.html
Retrieving administrator in xp
Recover the lost administrators password in Windows XP
Slightly more work needed if you lose or forget the Windows XP
administrator password.
1.First reboot Windows XP in safe mode by re starting the computer and
pressing F8 repeated as the computer starts up.
2.Then (in safe mode) click Start and then click Run.
In the open box type "control userpasswords2" without the quotes
I have just used quotes to differentiate what you have to type.
3.You will now have access to all the user accounts, including the
administrators account and will be able to reset the lost password.
4.Just click the administrators user account, and then click Reset
Password.
5.You will need to add a new password in the New password and the
Confirm new password boxes, and confirm by clicking OK.
All done, you have recovered the lost administrators password!

Sep 23, 2013 | HP ProLiant ML110 G5 (444809-001) Server

1 Answer

Wnr834bv2 power light is sometimes on in amber, then blinking green and I keep losing connection


Try resetting and then reconfigure the router.
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Jul 11, 2012 | NetGear WNR834B RangeMax NEXT Wireless-N...

1 Answer

I lost my cd for setup ipls help me this is my serial number of my netgear 1um8977f03f04tnx


To Configure the Router with Internet Access

Connect to one of the wireless router/access point's LAN Ethernet ports, turn off its DHCP server, and give the wireless router a static IP on your LAN:

  1. Connect a PC directly to a LAN port on the wireless router with an Ethernet cable.
  2. Power on the wireless router/access point.
  3. Reboot the PC.
  4. Log in to the wireless router though a browser. (Usually 192.168.1.1, with User Name = admin and Password = password, unless you changed them from the defaults).
  5. Go to the LAN IP menu and disable the wireless access point's DHCP server by unchecking Use router as DHCP server.
  6. Select LAN IP, and change the IP to 192.168.1.99.
  7. Click Apply to save the settings. You will lose the connection to the wireless router/access point , since its IP changed.
  8. Log in to the wireless router/access point with the URL: http://192.168.1.99
  9. Connect one of the wireless router's Local (LAN) ports to your existing network

Feb 21, 2011 | NetGear WGR614 Wireless Router

1 Answer

Set wep now cant login to enternet or router, and no lights


it seem that all setting on router has mashedup
need to reconfigure from begning

RECONFIGURE THE ROUTER:
1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
4. On the basic setting page scroll to the bottom and click on Apply.
5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
6. Click on lan ip setup under advanced.
7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
9. Power off the dsl modem and the router after making the connections.
10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
12. Access the router (http://192.168.10.1).
13. Login to the router (Username = admin Password = Password).
14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
16. Click Apply.
17. Logout of the router.
18. Open up another browser window and try to access internet.

Jan 14, 2010 | NetGear RangeMax WPN824 Router

1 Answer

Lost connection to server


If youre connected online with that game, i think the problem will most likely be on your internet connection,you can check if your internet connection is stable by pinging any website. You can try open up Windows Command Prompt if your using windows and type ping www.yahoo.com.

If youre referring to offline games and connected via network lan, you should check your LAN card if its ok by pinging your Lan address which is 127.0.0.1.

Or if your not connected on Network Lan, then you should try reinstalling the game.

Jan 02, 2010 | HP Pavilion Media Center a1330n - AMD...

1 Answer

Can't connect to my router


Try this;

Just set it again via wired connection or LAN. Access it via Network Connections, and under Network connection look for for your LAN. Right click Local area connection,click properties, then highlight Internet Protocol(TCP/IP), click properties. Under General choose "Use the following IP Address ".

Input on IP address you should have router tutorial. Commonly its default is 192.168.1.1
Subnest Mask 255.255.255.0
Default gateway 192.168.1.2

Under it choose " Use the following DNS server address"
Input DNS address DNS of your ISP

Click ok

goto Inernet browser tab input 192.168.1.1 this will direct you to router configuration setting input its user and pass. If unchanged see tutorial of your router or at the bottom of the router. Then you can change setting of your router.

Hope it helps.

Apr 08, 2009 | Zyxel Prestige 660R Router (P660R)

1 Answer

Want to use westell 327w as access point only


Yes, you can try to set up your network as follows:

  1. Unplug the second (Westell) router from anything and power it on.
  2. Reset your second router. Press and hold the Reset button on the router for 10-30 seconds. This will return the router to its factory settings and avoid any complications from the set-up you might have had when the router was being used as a primary router
  3. Connect one computer to the router. Do not connect the second router to the first at this time!
  4. Configure the second router at http://192.168.1.1/ (Check you manual for details. Usually the username is "admin" and the password is either blank or "password".)
  5. Change the LAN IP address of the second router from 192.168.1.1 to a free address within your LAN (see what IP range is used by your first router! If it using the same range (192.168.1.xxx) then 192.168.1.2 should be O.K.). The address you change to (192.168.1.2) must not be used by any other device with a static IP address in your network nor should be assigned by the DHCP server your network. A default Linksys router uses 192.168.1.1 itself and the DHCP server assigns 192.168.1.100-149.
  6. Turn off the DHCP server on the second router. (This is important, otherwise you end up with IP conflicts!)
  7. Save your settings.
  8. Unplug the computer from the second router.
  9. Connect an Ethernet cable from a numbered LAN port of the first router to a numbered LAN port of the second router. Do not use the Internet/WAN port on the second router!
  10. Start up the first router if necessary and reboot the second one as well.
  11. Voila!
The only problem I can see here is that your first router - now in charge of security - does not see your wireless clients as wireless, because they connect via an Ethernet port. Because the second router is connected via a LAN port, it is not using the router functions (DHCP, security, etc.) That might be ok with you - I'm just pointing it out.

If this doesn't work for you, just come back here, leave a comment and we take it from there.

Good luck and thanks for rating!

Apr 02, 2009 | Westell Wirespeed VersaLink...

3 Answers

HP Proliant ML350 G5 wont boot ,just spining.


The G5 Series is fairly new, if you're within warranty, call 1800-okCompaq.

Could be a bad cable, a bad monitor, or bad computer hardware. Any display at all or any beep codes?

On the back, the ml350 G5 will likely have an additional Network interface jack-- this may be labeled ILO. The ILO network connect allows you to use another PC on the same network to access this system (like a remote control via VNC or RDP) even if it won't power up--literally. Inside the ILO page, (you'll need the IP address of the ILO, the default account is administrator, and the default password is listed ona paper tag attached in the rear or on a sticker. If you can get into ILO via web browser: https://ipddress of ilo, you can check the Integrated log, which can shed some light on any failures.

Mar 19, 2009 | HP Compaq ProLiant ML350 G5 Server

Not finding what you are looking for?
HP Integrity rx4640 Server Logo

Related Topics:

1,410 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...