Question about Tascam US-122 USB Audio/MIDI Interface Sound Card

1 Answer

Scratchy sound I upgraded from XP and Cakewalk Music Creator 2003 to a new computer with Vista and Cakewalk MC4. I updated the drivers for my Tascam US-122 to be compatible with Vista. I am able to record, but on playback, the sound is scratchy. I've tried everything in Cakewalk and suspect that it's a problem with the Tascam US-122.

Posted by on

  • spyder61 Dec 22, 2008

    I just downloaded the vista drivers because the old computer died and the new one came with vista. Not only is the sound scratchy, but it keeps freezing up in cubase, and it won't record at all in sonar 7. I'm going to have vista taken off and xp loaded....

  • Anonymous Dec 24, 2008

    Same problem. Playback is scratchy and freezes up all of the time. I also downloaded the vista drivers.....not making a difference.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Yeah, many others have the same problem try reading the solution to one of the other ones of these with the same device. I'll try and find it to put the link in to the answer.

Posted on Mar 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I find compatable windows 7 drivers for my Tascam US-122 midi interface


I couldn't find any drivers available for Windows 7. However, you may be able to run it in 'Compatibility Mode'

See: How to run in compatibility mode Windows 7
http://www.sevenforums.com/tutorials/316-compatibility-mode.html

US-122 Windows Drivers: v. 3.40 Release Notes (download)
- v. 3.40 Windows Vista and XP Driver (download)
- v. 3.30 32 Bit Windows XP driver (download)
- v. 3.30 64 Bit Windows XP driver (download)

If this information was helpful, please give me a big thumbs-up when you rate my answer. Thanks!

Feb 03, 2010 | Tascam US-122 USB Audio/MIDI Interface...

1 Answer

My firewire suddenly stopped working!!!


I had the same problem after re-installing windows. The firewire just didnt work on the tascam interface. I managed to solve the problem by upgrading from windows xp to windows vista. I downloaded the vista drivers from the tascam site and everything sprang back into action. Problem solved! Hope this helps.

Jul 08, 2009 | Tascam FW-1804 Sound Card

1 Answer

Incompatibility with vista


Hi!

It should work with vista acording to this pdf from Tascam:
  • Vista Support: (download)
    and here are the drivers for that:
    - v. 3.40 Windows Vista and XP Driver (download)

    And here is the support site for that 122:
    http://www.tascam.com/products/us-122;9,15,68,19.html


    Good luck!
    Nic
    DONT forget to RATE me
  • Apr 02, 2009 | Tascam US-122 Sound Card

    2 Answers

    Noise in my tascam us-122


    hi, have you tried new cables? or another usb,firewire port? also if you can, try it on other pc. see if the condition changes. (could be defective) i had bought one of these, and the right channel did not work on any pc. hope this helps you, good luck!

    Mar 03, 2009 | Tascam US122 Audio/MIDI Interface with...

    1 Answer

    Distortion In Recording On Windows Vista


    check your buffer speeds. take them from the highest and lowest on sample rates. make sure your ram fits the bill.

    Jan 30, 2009 | Tascam FW-1884 Firewire Audio / Midi...

    1 Answer

    TASCAM US-122 Will Not work with XP PRO "Can't find Us-122 Driver


    The drivers for XP Home should work with XP Pro, but there is a 64 bit version of XP Pro, and I believe that may be your problem. You can try downloading a new version of the driver at:

    http://www.tascam.com/products/us-122;9,15,68,19.html

    to see if that fixes your problem. It's under Software and Firmware, Vista and XP driver 3.40. that device is considered a "legacy" device by the manufacture, so any more driver updates are unlikely.

    Dec 11, 2008 | Tascam US-122 Sound Card

    5 Answers

    Not responding


    you might want to downgrade to xp because vista uses alot of ram to run it. you could also get more ram. you need about 1gb and a half to 2 gigs to run most recording softwares and interfaces. i personally use vista cause i lost my xp disk and i got 2 gbs of ram and everything runs great, but if you really want to get into recording do what im doing and save up and buy a mac.


    sincerely
    andy kastrinelis
    owner of addex recording inc.

    Oct 13, 2007 | Tascam US-144 Sound Card

    Not finding what you are looking for?
    Tascam US-122 USB Audio/MIDI Interface Sound Card Logo

    Related Topics:

    284 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Tascam Audio Cards Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Ben Armstrong

    Level 2 Expert

    332 Answers

    Florin

    Level 3 Expert

    733 Answers

    Are you a Tascam Audio Card Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...