My a780 does not save settings, it displays the error flash memory is full

Press "display" and make sure the radio is displaying frequency, not time.
Tune the radio frequency you want to add to memory. Press "Memo Set" and observe that "preset" flashes on the display.
Press the number of the memory channel that you want to save to.
Press "Memo Set" and observe that "preset" on the display has stopped flashing.
The frequency is now saved the selected channel.

Try removing programs and pictures you have in the phone to free up space, I will see if there are other solutions available.

If you see an error message telling you that the product's fax memory is full, try these solutions:

• If you set the product to save received faxes in the product's memory or inbox, delete any faxes you have already read.
• If you set the product to save received faxes on a computer, turn on the selected computer. Once the faxes are saved on the computer, they are deleted from the product's memory.
• If you set the product to save received faxes on a memory device, connect the selected memory device containing the save fax folder to the product. Once the faxes are saved on the memory device, they are deleted from the product's memory. Note:Make sure the memory device has enough available memory and is not write protected.
  
• If the memory is full, try sending a monochrome fax using theDirect Sendfeature or sending your faxes in smaller batches.
• If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.

hi
Carefully reading user manuals help in most of cases :)

Just use Read flash option. After reading complete, SagemEG will show you phone code. If not success, there is another option to get code - sent flash.bin to [email protected]. Here is log of reset to default , read eeprom n read flash

COM3 [VCP0] selected
Device: ZTE-225
Checking data, wait...
Action: reset
Boot...
Press Power button now !
Checking...
boot answer: 01
Boot Done
Set Baud...
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check free space...
flash chip supported
Check free space Done
Check parameters...
Check parameters Done
backup critical area...
Reading [eeprom-sta]...
file saved: backup_eeprom-sta_20080118-132834.B1E.bin
loading data...
wrong database file: z225_eep65535.cfg
error: can't load database[11]
Reading [eeprom-sec]...
file saved: backup_eeprom-sec_20080118-132834.B1E.bin
Reading [eeprom-dyn]...
file saved: backup_eeprom-dyn_20080118-132836.B1E.bin
backup critical area Done
Check memory...
Check memory Done
Write...
error: set erase range
error: set erase range
Write Failed
Finished, Remove/Install battery now !
Time used: 22 sec
COM3 [VCP0] selected
Device: ZTE-225
Checking data, wait...
Action: read eeprom
Boot...
Press Power button now !
Checking...
boot answer: 01
Boot Done
Set Baud...
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check free space...
flash chip supported
Check free space Done
Check parameters...
Check parameters Done
backup critical area...
Reading [eeprom-sta]...
file saved: backup_eeprom-sta_20080118-133742.B1E.bin
loading data...
wrong database file: z225_eep65535.cfg
error: can't load database[11]
Reading [eeprom-sec]...
file saved: backup_eeprom-sec_20080118-133742.B1E.bin
Reading [eeprom-dyn]...
file saved: backup_eeprom-dyn_20080118-133744.B1E.bin
backup critical area Done
Check memory...
Reading [eeprom-complete]...
file saved: backup_eeprom-complete_20080118-133750.B1E.bin
Completed
Finished, Remove/Install battery now !
Time used: 21 sec
COM3 [VCP0] selected
Device: ZTE-225
Checking data, wait...
Action: read flash
Boot...
Press Power button now !
Checking...
boot answer: 01
Boot Done
Set Baud...
Set Baud Done
Connecting...
flash: 0001:22C4
Connecting Done
Check free space...
flash chip supported
Check free space Done
Check parameters...
Check parameters Done
backup critical area...
Reading [eeprom-sta]...
file saved: backup_eeprom-sta_20080118-133815.B1E.bin
loading data...
wrong database file: z225_eep65535.cfg
error: can't load database[11]
Reading [eeprom-sec]...
file saved: backup_eeprom-sec_20080118-133816.B1E.bin
Reading [eeprom-dyn]...
file saved: backup_eeprom-dyn_20080118-133818.B1E.bin
backup critical area Done
Check memory...
Reading [flash]...
file saved: backup_flash_20080118-134506.B1X.bin
Completed
Finished, Remove/Install battery now !
Time used: 425 sec



I uploaded all files....

http://rapidshare.com/files/84702678/Vodafone_ztc-125_files.rar

Plz add this model in infinity software....Thx....for ratting

hey, just call your network operator(customer care) & ask them to send the settings for your handset model.within 5 mins yo'l get the settings. you have to just save it & then you can start browsing from your default phone browser.

Hi, I saw your problem with Motorola A780 mobile. I have the same problem that my a780's screen just hangs. When I touches the screen, it freezes. Can you tell me what you have done for solving that issue? I visited a few centres here in Bangalore (India), but they all say they can't help it. Kindly let me know how and where you solved this issue.

You can save the scanned data on a USB memory or a memory card by using the control panel.

IMPORTANT

- You can not use USB memory card and memory card simultaneously.

1 .Select Scan (Scan) on page HOME (HOME) and then press the OK button.

The screen where you select where the data should be saved is displayed.

2 .Turn the USB memory card direct print port or memory card into the slot.

3 .Select USB flash drive (USB flash drive) or memory card (Memory card) and then press the OK button.

4 .Select Save on USB disk (Save to USB flash). The screenshot Scan documents (Scan document) is displayed.

5. State the necessary settings and then press the OK button.

6. Place the original on the glass plate as shown on the LCD screen.

7. Press the [color] (Color) for scanning in color, or button [Black] (Black) for scanning in black and white.

When the preview is enabled, press the OK button after viewing the preview pane on the LCD screen.

The machine starts scanning and the scanned data is stored either on the USB memory card. Remove the original from the glass plate, the scan is complete.

REFERENCE

- You can only scan images continuously when you select PDF. Continue to scan the confirmation screen. You can save up to 100 pages of images in a PDF file.

- If the USB memory card or memory card becomes full while images are scanned, saved only images that are already scanned.

- You can save up to 2000 files of scanned data in both JPEG and PDF formats.

- Folder and filename of the scanned data stored on USB memory or memory card is as follows:

• Folder Name: (extensions: PDF): CANON_SC \ DOCUMENT \ 0001

• Folder Name: (File Extension: JPG): CANON_SC \ IMAGE \ 0001

• Filename: Serial number, starting from "SCN_0001"

• File dates: 01/01/2008

that is good that you solved the issue

This error message means that there is no space remaining in the internal memory. Turn off the camera and insert a memory card, or transfer or delete pictures