Question about Projection Televisions

1 Answer

Hi guys, don't know if the previous post got through. Have a new LCD tv and DVDr, connected with a HDMI cable. when DVDr switched off analogue and digital picture is fine. as soon as dvd is switched on analogue goes blurred and digital signal is lost. when I disconnect hdmi and use scart it all works ok. The manual says HDMI will give me best results???? can you help please.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Yes, hdmi will give you better results..
are you running hdmi to hdmi connection on tv from cable box?
if so, that is correct but as for the dvdr, what tv port are you connecting it to? i would use another hdmi cable for the dvd too for best picture resultif it's an option on your dvd.. you should have multiple input outlets on your lcd with 1-3 options for input devices via analog or hdmi.. so analog is not hdmi--hdmi is digital so it switches to the hdmi resolution when you turn it on..

let me know how it goes and if i was helpful involving resolution.. helpful feedback is appreciated.. thanks, d

your dvd player should be set to a different

Posted on Feb 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cant seem to tune in after digital switch over not got any chanels


If your TV is an older variety that wasnt set up for digital signal you will need a set top converter box.

Jun 22, 2011 | Toshiba Projection Televisions

2 Answers

Connection error from ps3 to tv.


When you hit the power button from the console, hod it until it beeps at you twice and it will reset the video settings. I read this on a post from gamespot. I hope it works.

Jul 27, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

5 Answers

I have a samsung LCD display panel. Model LAM3261B it is a HD panel with analogue tuner. The A/V works fine as does the HDMI but the tuner is not picking up any signal. it has 4.30 volts and 3 volts at...


If this is the first time this is being set up, On the setting of the Samsung, you have the option on the channel for the channel schemes. See if it conforms to your area. It identifies which frequency for each channel. Try the different settings. If this has worked before check the connections or ports and try a another TV if see if it works. If this is via cable, if there is a box between the TV and the cable wire, have it checked if another TV worked on it.

Jul 14, 2009 | Projection Televisions

2 Answers

HDMI PORT STOPPED WORKING!!


the best option here is connect via a standard PS2 avi cable or componet cable until your tech guy comes out!

Apr 30, 2009 | Projection Televisions

1 Answer

I have Time Warner cable. I just bought a new Sony LCD HD tv and the sound and the video are out of sync on some channels - HD and non HD I am using a HDMI cable. Any solutions that you know of?


Yes there is a simple solution. First, for some reason., Time Warner cable boxes have SERIOUS HDMI issues, including no pic, intermittent pic and sound and the one that you are having. The easy fix is to hook the TV to the cable box using the component connections instead of the HDMI. Normally I would suggest getting the cable box replaced, but I have seen customers exchange cable boxes 3 or 4 times and still have the problem or have a new problem. Use the component connections and be sure to let me know if this works. If it does, be sure to rate this solution. Thanks!

Nov 09, 2008 | Projection Televisions

1 Answer

Signal loss from GF9600GT to LCD 42PFL9632D


the issue may be hdcp, if both the pc and tv arent enabled you wont get a picture.
try to connect dvi to dvi or if you havent got dvi try an adaptr

Mar 19, 2008 | Projection Televisions

1 Answer

Yamaha DSPAX761 no s-video to HDMI


S-Video and Composite are analogue and HDMI is digital. Your receiver dose not have the capability to convert from analogue to digital and hence you are not not getting any video.

Feb 28, 2008 | Projection Televisions

2 Answers

Hdmi


Bring up the "service" menu, put the TV in standby mode, then press in sequence :

Onscreen Display ( the little screen with the i+ in it )
5 ( channel number 5 )
Volume Up ( upper end of volume button )
Analogue ( middle top button )

The TV should switch on and when it's warmed up, you should see a screen with lots of big green lettering on it.

Press the "menu" button ( middle bottom )

Use the direction dial to move down to "LCD Drivers" and press right on the dial to enter this menu.

Move down to "S H Pos Reg R". It should be "10", change it to "11". ( Left/Right to adjust )
Move down to "S H Pos Reg G". It should be "10", change it to "11".
Move down to "S H Pos Reg B". It should be "10", change it to "11".

Press the menu bottom to drop out of the menus, and the standby button to drop to standby. Switch back on, and hopefully your ghosting will be gone.

Nov 15, 2007 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...