I installed Digi Neo 4 on RedHat Linux 6.2. On official site support page it was printed that afterwards an initial script must appear in /etc/rc.d/init.d which I had to start. But this script even after rebooting the system doesn't appear and lspci can't recognize this device. What can I do?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
have you installed drivers for the card, as windows might know what it is but it wont be able to use it till the drivers are installed click below onto what version of windows you have and download the drivers
Sounds like you need to make sure your chipset drivers are up to date and all service packs are installed. Ther is no reason it will not work in vista as it works in windows 7 64bit.So visit your motherboard site to get bios updates and driver updates, then update all through windows update and try to reinstall. Windows should install a driver for vista.
this is a link for non vista http://www.dynexproducts.com/t-drivers.aspx
Hi check whether the Drivers are compatible with your operating systems.There is compatibility wizard in OS like microsoft.You can also try the old drivers and then update it.Sometimes two way swap is best way to indicate where the problems is.Test the new adapter with old drivers.Hope this help.Post any errors you get and we can work it out from there.
Remove the card, download and install the latest drivers and firmware for the motherboard BIOS and the pcmcia controller from the laptop manufacturer's site.
Uninstall all software and drivers pertaining to the startech card, download the newest set from their site, install the card back.