An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert that has over 500 points.
Re: geting no signal
The set is probably in the wrong mode* ie* video. you will need a remote if there is no menu button on the front of the tv. "Some of these remotes are proprietary to the set". If you can get the menu select cable and have the set search channels.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Follow this procedure to troubleshoot if the TV does not respond to the supplied remote control.
Remove the batteries from the remote control.
Press each button on the remote control twice.
Make sure none of the remote control buttons are jammed.
Install fresh batteries into the remote control. IMPORTANT: Make sure the batteries are inserted in the (+ and -) direction shown inside the battery compartment.
Make sure nothing is blocking the Infrared (IR) sensor on the TV.
IMPORTANT: Some locations can interfere with the IR signal from the remote control. Glass enclosures, as well as fluorescent or halogen lights, may prevent the IR signal from reaching the TV.
Point the remote control at the IR sensor of the TV.
Press the POWER button and other buttons to test TV operation.
IMPORTANT: Do not hold down the POWER button too long. Doing so may prevent the remote control from operating the TV.
If some of the remote control buttons operate the TV but others do not, the remote control may need replaced.
If all of the remote control buttons work, no further troubleshooting is required. Otherwise, continue troubleshooting below.
Try using the remote control at varying distances from the TV. IMPORTANT: Using the remote control too close or too far away may prevent the IR signal from reaching the TV.
Turn the Light Sensor setting to OFF.
On the TV itself, press the HOME button on the TV.
Using the up arrow or down arrow select Preferences.
Press the INPUT button.
Press the up arrow or down arrow to select ECO.
Press the INPUT button.
Use the up arrow or down arrow to select Light Sensor.
The troubleshooting steps above should resolve the issue. If you completed all the steps and the issue is not resolved, service may be required or the remote control may need replaced. Contact the Customer Experience Center at (239) 768-7547 to speak with a service representative for further assistance.
Yes it should work, connect the RCA video out (yellow connector DTV Converter) to the RCA video in (yellow connector TV set). Then connect the RCA Audio out (Red-Right White-Left DTV converter) to the RCA audio in (Red-Right White-Left TV set).
Then setup your converter box according to the manufacture's instructions.