Question about Cisco ASA 5520 Firewall

2 Answers

Problem in installing the asdm image ASA 5520 ver 7.1

Hi everybody,

When I am installing the asdm image in ASA 5520 getting an error like "not sufficient space to install" ,
checked the status but still 248 MB is free.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

1-issue command dir all or show flash
2-delete old file and squeeze it.
3-take out flash card, use card reader to save new asdm file
4.insert back to ASA, change boot system and reload

Posted on Sep 11, 2009

I had this same issue on my ASA 5520.

1. Copy the config and IOS image to a tftp server.
2. Format flash (disk0)
3. set rommon server, ip addy, and file settings.
4. tftpdnld
5. Once the system has booted to the image copy the asa image file, asdm image file, and config to flash
6. configure asdm image default location and reload

Posted on Oct 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i configure pppoe on asa 5520 ver8.4 and remote access vpn?


http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/pppoe.html

Nov 08, 2012 | Cisco ASA 5520 Firewall

1 Answer

How to block a port in cisco asa 5520 firewall


hi,
when u login in ASDM you can find on right side services and u create one whre u add which all ports u want to and apply that in ur rules

Aug 23, 2010 | Cisco ASA 5520 Firewall

1 Answer

Need some basic show command to troubleshoot


mode exec user Router)
ping ip
show ip route
show version
traceroute ip

mode exec priveligiado
show arp
show interface
show protcols
show ip protocols
show startup-config
erase startup-config
reload

Jul 27, 2010 | Cisco ASA 5520 Firewall

1 Answer

How do I recover firewall password?


You may refer to the steps in the link below:

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/trouble.html#wp1049302

I hope this helps!

May 05, 2010 | Cisco ASA 5520 Firewall

1 Answer

Hello all can you please help me on how to restore the configuration of my ASA 5520? thanx


If you are going for factory reset use the following commands

asa>enable
asa#write erase
asa#reload

Dont save the configuration when it prompts for it.

if you want to restore the configuration from the backup

1. You need to have a TFTP server
2. Locate the config file on your TFTP server
3. TFTP server should be reachable from ASA

then

asa#copy tftp flash

give the tftp server ip address
give the configuration file name (as exactly on the TFTP server)

reload


Apr 01, 2009 | Cisco ASA 5520 Firewall

1 Answer

ASA LAN failover Problem


Hi,

The crossover cable should work fine for sure.

Best Regards,
TL

Mar 17, 2009 | Nokia IP 350 Firewall

1 Answer

Sir, I have an ASA 5500 series device and i want to configure it user licence but i dont know how to configure it plz give me a proper solution


Use a web browser and point it to the private IP address of the ASA. Download ASDM and run through the wizards.

Good Luck!

Jan 20, 2009 | Cisco ASA 5500 Firewall

1 Answer

Cisco asa5505 problem


You seem to have the last resort (o.o.o.o) set to VLAN1 which is set as an inside interface.
Is VLAN1 connected to the outside router or internet backbone?
If not, change the last resort to the outside Ethernet port.

Apr 16, 2008 | Cisco ASA 5500 Firewall

4 Answers

Installation of cisco asa 5510 firewall


If you can't get the manament working initially I suggest the following

Setup a console connection
Type "enable" and press enter to access priveleged exec mode on the ASA
Type "config terminal" and press enter to access configuration mode
Type "configure factory-default" and press enter to load default settings.
Assign a static IP to your PC of 192.168.1.5 and try to browse to https://192.168.1.1 (PC is plugged into management interface)

You should be prompted to begin using ASDM

Jul 30, 2007 | Cisco ASA 5510 Firewall

Not finding what you are looking for?
Cisco ASA 5520 Firewall Logo

1,484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Network Security & Firewall Devices Experts

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Candy

Level 2 Expert

82 Answers

Huseyin Huseyin
Huseyin Huseyin

Level 3 Expert

3462 Answers

Are you a Cisco Network Security and Firewall Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...