Question about Toshiba 44NHM84 44" TV

4 Answers

Power on? When I power on the tv, the green power light flashes then goes back to red. I have no idea what the problmen is

Posted by on

  • 5 more comments 
  • Anonymous Mar 16, 2008

    green light flashes then goes red after about a minute. No picture no sound.

  • rmwiens Mar 26, 2008

    When I push the power button the green light flashes for about 30 seconds then goes back to red. Sometimes it takes several tries before I can get the TV to turn on. I've noticed that if I unplug it for a few seconds that it usually turns on the next time.

  • Luke77 Apr 06, 2008

    Eact same problem. Green light flashes for about 20 seconds then goes back to red.

  • Raydel Romaguera Apr 10, 2008

    same issue here.

  • ArborCraig Apr 11, 2008

    same problem just started today.

  • jaysg2000 Nov 16, 2008

    tv tries to load up flashes green then goes back to red with only a black screen what's the problem

  • dangel4405 Apr 17, 2009

    I had turned my tv on and it was fine, it was taking its normal time to boot up and get its full color clarity. When I had went onto my DVR tv recorder to watch something and started to fastforward to where i had left off at, all while the clarity was still faintly warming up, all of the sudden i heard a weird sound almost like a bulb when it shatters but kinda soft hearing. The next thing I know my tv had turned off. I tried turning it on and it started making its normal booting up sounds all with the power light blinking green, and then nothing it turns red and shuts down. I have tried rebooting only about 5 times even unplugged for a while and then tried, but still same problem. I have quit trying to turn on so it doesn't damage or lead to other problems that I don't need. Althogh the tv is about 4.5-5 years old and was branned new when I bought it, it has very little watch hours on it. I did buy the extended 5 year warranty but don't know if it is up yet. Can any one let me know what this problem may or may not be, and where i could look to find out if my warranty is still good because original papers got lost, but I did buy it at ABC Wherehouse so it should be in their computer records. PLEASE ANYONE THAT CAN HELP ME DO SO!!!!!! P.S. it is NBA & NHL PLAYOFFS starting and iI am without a tv for the time being!!! you can reach me at to give me assistance. THANK YOU!!!


4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just changed the lamp today and it's working like new. Whew, that was a close one. Thank you.

Posted on May 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Agree with Batto23. Just replaced the lamp (about $150) and everything is fine. Thanks.

Posted on Apr 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello I found out what is the problem, the only thing we need to do is to change the light bulb on the right hand on the TV, I purchase the light bulb at Ebay part # TOSHIBA TBL4-LMP for 109.99, i got the light bulb today, it took me about 20 minute to change the bulb, and now is working again back to normal.
thank god cause i like my toshiba 44nhm84 tv.

Posted on Apr 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Im looking for this solution also

Posted on Mar 05, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Flashing red and green power indicator light

Y-Sustain board and its drivers should be checked.

Jul 16, 2012 | Fujitsu Plasmavision 42" TV

2 Answers

Mitsubishi VS-70707 rear projection TV


Jan 31, 2008 | Mitsubishi WS-55807 TV

1 Answer

Green light is flasing no picture

In most instances the flashing green (or red or other colors) indicates that the TV has engaged a "protection mode" that is to keep from causing further damage in the set.

There is one thing that you might try... Unplug the TV from the wall. Leave it unplugged for about ten minutes and then plug it back in. If this restores normal function then the microprocessor that controls your TV was confused by something usually a power spike or brown out.

If the set goes back to the same mode with the flashing light there is an internal defect that can only be corrected by a qualified Technician specializing in Televisions. There is a safety factor involved here that's why it has shut itself down in the first place


Jun 04, 2010 | Toshiba Standard (CRT) Televisions

1 Answer

Picture goes out and red power light flashes

Up , i also encountered the same problem 3 days ago. 42" Fujitsu Plasmavission. I'll try to call an expert, i hope its not a digital board again for me, it will cost around $2,000usd so better buy a new Korean made LCD for better and cheaper parts. I guess you also experiencing trmendous heat at the back of your plasma right?

Dec 19, 2009 | Fujitsu Plasmavision 42" TV

1 Answer

Tv keeps turning itself off

You most likely either have a faulty power supply or high voltage transformer that is failing. You can test them both with a voltmeter or multi-tester. The capacitors on the newer sets seem to overheat and burn out quickly

Oct 10, 2009 | Standard (CRT) Televisions

1 Answer

TV Want Power up

This tv have different causes for no power.
Can you tell me if any light on the chassis is off?, if so, let me know the location part number.
Common problem is IC output ( short) or convergence STKs ICs.
Thank you

Jul 26, 2009 | Hitachi 43FDX01B TV

1 Answer

We have a Hitachi model # 50V720 TV. When you turn it on, green power light flashes, then temp and lamp lights begin to flash, eventually goes to just the lamp. Can you guide us as to what the problem may...

Y sus (sustain) board or main power board has dry capacitors or dead transistors or even main chip is dead, but to know more accurately you need to count the red light flashes. Google "red blinking codes" should find the answer, ebay sells Y sus boards or power boards around $125 (cheapest) for plasma TVs.

Jul 21, 2009 | Standard (CRT) Televisions

2 Answers

SONY KDF-E55A20 5 red blinking lights on power button

Symptom shows Lamp is weak in result and causing restart of TV again and again. Your TV requires new lamp as per following part number...
It is available in Sony Accessories Store for $200 and replacement procedure is written in instruction manual of TV.

Always buy Sony original lamp for TV and avoid aftermarket / cheap lamp for TV safety.

May 18, 2009 | Sony KV-36FV26 TV

1 Answer

RCA 32V434T Flashing Red Light

Flashing protect mode..internal shorted component.

Aug 14, 2008 | RCA F32450 32" TV

Not finding what you are looking for?
Toshiba 44NHM84 44" TV Logo

Related Topics:

623 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Standard (CRT) Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Toshiba Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides