Question about Washing Machines

2 Answers

Hotpoint washing machine vbxr1090 help!!!!

I want to take the face of the washing machine off to see if there is a clog. i saw the repair man had done so the first time out here to unclog the drain. now i cant figure out how to take it apart myself...where are the screws to take off the front

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Take a puddy knife and slip it at each corner between the top half and the front panel, there should be clips there, then the top of the front panel will come out, then lift up and remove

Posted on Aug 31, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 52 Answers

You have to flip the console open(removing screw on each side) and remove the cabinet clips.

Posted on Feb 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much should you expect to pay to have a new belt fitted to a hotpoint washing machine


It depends on where you live, and who you call.
If you call Hotpoint, then the callout charge is nearly £100.00.
If you call an independent repair man, then you can expect to pay anything between £4.00 and £60.00 for the call, plus the cost of the belt.
Hope this helps.

Feb 16, 2010 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

I CANNOT READ THE INFORMATION ON THE LCD DISPLAY ON MY HOTPOINT WASHING MACHINE MODEL WT960 ULTIMA


some times in many m/c it has a code for the status of the m/c
i mean not complet words like F2 IT MEANS FOR REPAIR MAN THE FAULT NO 2
THANKS

Jul 11, 2009 | Hotpoint Washing Machines

1 Answer

Hotpoint first edition automatic washing machine washes clothes .


I've got a Hotpoint First Edition WM52 that stopped spinning at the end of the wash cycle. Called the repair man and he said it was most likely just the filter blocked? Suggested I reemove the front base panel and try to locate the filter remove, clean and replace. Front panel wouldn't come off, base panel at the rear, 6 screws to remove revealing a black squeezy hose with slide grips holding them on, on removal of the hose two ten pence pieces, a one pence piece and a childs hair clip blackened with dirt sat blocking the top of the hose.
Hope this helps; repair man saved me £58+vat just with a few words and a bit of persistence from myself

Jun 17, 2009 | Hotpoint First Edition FEW10P Front Load...

1 Answer

Hotpoint Aquarius wd440 washer/dryer wont pump out water HELP!


Try unplugging the unit and plug it back in. This may reset the controls.

Jun 02, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Door seal needs to be repleced


sorry not a answer as such. I found out the machine is still under guarantee. So I just called out the repair man.

Feb 12, 2009 | Hotpoint Aquarius WF210 Front Load Washer

1 Answer

Hotpoint WM51 Washing Machine keeps tripping the electric


I had this problem; it was the motor arthing out on the body. It took a repair man half an hour to sort and it cost me £35. Hope this helps. Domo.

Jan 24, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Bearings on Hotpoint


I WOULD GET A NEW SET OF BEARINGS IN THIS MACHINE BECAUSE THESE ARE VERY RELIABLE AND I HAVE DONE LOADS OF THEM AND ALL YOU HAVE TO DO IS SHOP AROUND FOR A GOOD SERVICE MAN AT A FAIR PRICE

Apr 07, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint VBXR1090 Washer


sounds like your brushes need replaced or your motor would try the brushes first

Jan 08, 2008 | Hotpoint VBXR1090D Top Load Washer

2 Answers

Lock


He's talking BS, get another opinion.

Oct 06, 2007 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?

Open Questions:

0 Answers

Kenmore Elite HE4T Washing Machine Diagnostic Test Didn't complete and clothes aren't spun as dry as in the past I have a Kenmore Elite HE4T washing machine and I noticed that recently it isn't getting all of the clothes completely dry from the final spin cycle. Thus, the dryer has to run through two cycles to get the clothes dry. I did a bunch of research and made sure there weren't any kinks or blockages in the drain lines; and opened up the bottom of the washer and cleaned out the drain cleanout. I found a few pennies, but everything seemed to be working ok. I ran a load and had the bottom open so that I could make sure the motor, drain and belt were all working properly. The drain does get the water out of the washer, so the clothes aren't sitting in water, they just don't seem to be spun as fast or as long as they used to. I always put it on the "extra high" spin setting no matter which type of load I run. So, I found a way to run the diagnostic test on the washer and it went through C0-C5 (the agitation step) and all worked great, until it wouldn't come out of C5 after at least 10 minutes and go thru C6-C8. I had to cancel the diagnostic test and hit the "drain and spin" button to get all of the water back out of the washer. BTW, the "drain and spin" seems to get the clothes a bit drier than when I have it run through the "normal" cycle with the "extra high" spin. If anyone has any other thoughts, I would really appreciate it. This unit is in a small space with the dryer attached so to take it out and do repairs is a pretty big hassle. It has had a new control board and two new fill valves in the 10+ years that I have owned it. Questions I have: 1.should I remove the entire drain pump to make sure there isn't anything lodged in it? 2. could it be the belt slipping slightly and keeping the spin from reaching its 1200 RPMs? 3. Anything else I may be missing???

Jan 17, 2017 | Kenmore Washing Machines

Washing Machines Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...