Question about Canon MX700 Office All-In-One InkJet Printer

1 Answer

LCD Screen is blue

Hi!

I have had this Canon MX700 printer for about a month now and the LCD screen just quit working. I have messed with everything. It is just blue, no menu or anything...

I am unable to see if the color just needs adjusting as I can't see in which sequence I am supposed to be hitting the buttons.

Thanks for any help!
Nicki

Posted by on

  • adrianwedd Nov 30, 2008

    same. LCD gone to ****. was wondering if it's a contrast issue but can't modify the contrast as i can't see anything on the LCD.

×

1 Answer

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Canon MX700 and suddenly I began to have problems with the color. I am using Canon ink cartridges but all my color jobs come out with only blue and black, no magenta or yellow. Every time I run...


This worked for me:
Unplug (not just turn off) the printer. Wait at least 20 seconds, then plug it back in. Hold the Feed Switch down, then turn on the printer (continue to hold the Feed Switch down). When the printer finishes cycling the paper feed, release the Feed Switch. Copy anything and it should print. You're good to go.

Oct 01, 2013 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

How to scan a legal document using the Canon MX700 printer


The image below should help you! It was taken from the Canon PIXMA MX700 Quick Start Guide.
If you want to edit the scanned image or scan originals with advanced settings, see the Scanning Guide on your on-screen manual.

7_3_2012_10_45_28_pm.png

Jul 03, 2012 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

My MX700 printer tries to send faxes instead of printing page(s).


hi
change your default printer your mx700
1 - start menu
2 - printer and faxes
3 - right click on your printer
not on your fax icon

Jun 09, 2010 | Canon MX700 Office All-In-One InkJet...

1 Answer

Printer is a canon mx700 and the lcd screen is displaying error message 6A80


Pls try this solution:

  • Switch the printer OFF
  • Press buttons 1 + 2 + 3 and 4 (simultaneously using four fingers)
  • Keep pressing this four buttons for 10 seconds
  • Release the On/Off button (number 4) (Keeping pressing the others)
  • After a few seconds (when the printer go ON), release buttons 1, 2, 3

thanks for using fixya!

pls leave a comment if it work.

Nov 30, 2009 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

It will not scan instead it states it is not connected to the port, I tried several things including going through all the screen help supplied by Canon's website. it refuses to get out of fax report...


Try switching everything off, and on again.
Make sure you switch on the scanner before the computer.
If this fails, contact the manufacturer direct. They are usually quite helpful.
JR

Sep 29, 2009 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

Scanner on Canon Pixma MX700 doesn't work


hi dear

try using another software like photoshop
or acd see
oke

Apr 03, 2009 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

Fax machine cuts into incoming calls


Issue: Device answers while in Tel Priority Mode
Solution: Disable the Manual /Auto Switch MX700

Man/Auto Switch By default, [Man/Auto Switch] is set [OFF]. If it was set [ON] and you want to change this setting or if you want to increase the time before the fax answers, follow these steps.
1. Press the <FAX> button, then press the <Menu> button . The Fax menu is displayed.
2. Press the l_mark_s.jpg or r_mark_s.jpg button to select Maintenance/settings, then press the OK button.

l_01815.jpg The Maintenance/settings screen is displayed.
3. Press the l_mark_s.jpg or r_mark_s.jpg button to select Device settings, then press the OK button.

l_01918.jpg The Device settings screen is displayed.
4. Press the t_mark_s.jpg or d_mark_s.jpg button to select FAX settings, then press the OK button.

l_02021.jpg The FAX settings screen is displayed.
5. Press the t_mark_s.jpg or d_mark_s.jpg button to select RX settings, then press the OK button.
6. Press the t_mark_s.jpg or d_mark_s.jpg button to select [Manual / auto switch], then press the OK button.


7. Press the t_mark_s.jpg or d_mark_s.jpg button to select [ON] or [OFF], then press the OK button.


from canon website
"http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=123&modelid=15651#SupportDetailAct"

Dec 19, 2008 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

Can't get Canon PIxma MX700 to work over my wireless


how do you make the print larger...it's coming out miniscule

Feb 07, 2008 | Canon PIXMA MX700 All-In-One InkJet...

Not finding what you are looking for?
Canon MX700 Office All-In-One InkJet Printer Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96738 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...