Question about Symantec Axent VelociRaptor 1000 (16-00-00039) Firewall

1 Answer

Managment i got a raptor from a friend used is how do you connect either through the intranet or via the com port. let me know please

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can connect to the FW appliance:
1. trough the cosole port
2. through the inside ethernet port
Either way you will need to get the random key from the LCD on the front.
1. requires learning the console menu
2. requires a client application installed on a Windows or Linux Host

Posted on Sep 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Port forwarding


WHEN YOU OPEN A PORT YOU NEED TO ASSIGN THE DEVICE THAT GOES ASSOCIATED WITH IT...LIKE PC1 IP 192.168.1.1
PC2 IP 192.168.1.2 THE PORT YOU WANT TO OPEN NEEDS TO BE ASSOCIATED TO EITHER PC1 0R PC2 WHICH EVER IS RUNNING YOUR APLICATION...TEKGODS.COM

Feb 18, 2013 | D-Link DSL-2740R Wireless N ADSL2 4-Port...

Tip

Why can Networked Devices not be used when a VPN connection is active?


With most VPNs, as soon as the VPN connection is established, it will take precedence over all other network connections. Access to the Internet (other than to keep the VPN connection itself alive) will go via the VPN and the corporate network you are connected to, rather than the local ISP. Furthermore, access to the local network is temporarily disabled.

As a result, your local print server may not be accessible,
you cannot use devices via the Network USB hub, or the USB ports on your router (if it has these), you may not even be able to access your local router's configuration page or ping the router or other machines in the local network.

This is done because of security reasons.
When a computer is connected to a corporate network via a VPN, the administrator needs to make sure that that machine can not act as a some form of a gateway enabling other machines in the local network to access that corporate network in any way. For that reason, the machine connecting via the VPN must temporarily be isolated from the local network.

on May 05, 2010 | Network Security & Firewall Devices

1 Answer

How to identify a IP380 is online


If you know the IP address then you have two choices:
Indirect method: Test a 'listening' port on the firewall. For instance, if there is a web server behind the firewall, check HTTP (TCP/80) or FTP (TCP/21).

Direct method: If it is enabled for remote management you can check the remote management port, typically SSH (TCP&UDP/22).

If you've never done port level testing there are a number of ways to do that. Microsoft provides a commandline tool named portqry: http://www.microsoft.com/downloads/details.aspx?familyid=89811747-C74B-4638-A2D5-AC828BDC6983&displaylang=en

As well as a gui interface for it: http://download.microsoft.com/download/3/f/4/3f4c6a54-65f0-4164-bdec-a3411ba24d3a/portqryui.exe

For instructions please visit http://support.microsoft.com/?kbid=310099.

May 15, 2009 | Nokia IP380 Firewall

1 Answer

I'm using rogers as my ISP. my rogers modem is connected to symantec gateway security 360 switch which is connected to D-link switch. i am connected to the symantec switch, and have internet connection,...


Hummm
it may be a pretty simple fix.

Connect the modem from rogers to the WAN port not to the switch port of the symantec gateway

connect the DLink switch to a switch port on the switch part of the getway and both of you should be able to get an internal IP

Apr 13, 2009 | Network Security & Firewall Devices

2 Answers

Locked out of HTTP inside port on SG300 - telnet works


I was unable to supply a link to the manual for this product so I downloaded it to one of my sites to make it available to you. Here is the link:

http://www.dscmain.com/snaplink/sg_314_ug_revA.pdf

Please let me know if this helps...
Tim

Mar 23, 2009 | SG300 (SG0126US) Firewall

1 Answer

How do I set my Netgear FVL328 to be a switch for my network? I have a Dlink DIR-655 connected to my cable modem. But I don't have enough ports for all of my devices. So I connected the Netgear FVL328...


If I understand, the D-link is a switch but you don't have enough ports so you want to use the Netgear to get additional ports.
The way to do it is to use one of the Netgear Lan ports to connect to one of the D-link ports, then use the remaining Netgear ports for your stuff, leaving the WAN port disconnected.
Personally I would use the Netgear as a firewall and connect the D-link to get the additional ports.
Also, Apparently the Netgear and the cable modem or D-link are both running DHCP servers to assign IP addresses to connected devices that need one assigned. You should turn the DHCP server off in whatever unit is being used in a slave fashion. This is done in the netgear by opening a browser and typing in the IP address for the netgear, which is probably 192.168.1.1, and logging in using username 'admin' and password 'password' unless you changed them.

Mar 15, 2009 | NetGear FVL328 and FA311...

3 Answers

Can you connect a acer aspire one to the tv via hdmi


You cannot connect your acer aspire one via HDMI as its not having HDMI port. But you can connect via VGA cable and most of the TV supporting HDMI will also definitely support VGA input.

Jan 10, 2009 | Nokia IP 350 Firewall

2 Answers

Firewall/ports


Hello there, you only need to open a port for utorrent, if you use a Router device for sharing your internet connection to more than 1 computer. If you do indeed own a router then you will need to log-in to it, via your web browser and change the necessary settings to forward the port that utorrent uses, to your local computers address.

Please write again if you need more support.

Hope this helps.

Apr 06, 2008 | Symantec (10427438) Firewall

2 Answers

How to configure Sonicwall TZ 190? I have connected console to the Sonicwall and trying to open it via Console. But no configuration or prompt is coming. Kindly help ASAP.


open control panel and then add printers and other hardware, then up in left hand menu go to system then hardware, device managed and check if your driver is updated. if it says it's working properly then uninstall it and it'll pop back up reinstall then it should work fine.

Dec 03, 2007 | SonicWALL TZ170 (01-ssc-5740) Firewall

4 Answers

Installation of cisco asa 5510 firewall


If you can't get the manament working initially I suggest the following

Setup a console connection
Type "enable" and press enter to access priveleged exec mode on the ASA
Type "config terminal" and press enter to access configuration mode
Type "configure factory-default" and press enter to load default settings.
Assign a static IP to your PC of 192.168.1.5 and try to browse to https://192.168.1.1 (PC is plugged into management interface)

You should be prompted to begin using ASDM

Jul 30, 2007 | Cisco ASA 5510 Firewall

Not finding what you are looking for?
Symantec Axent VelociRaptor 1000 (16-00-00039) Firewall Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symantec Network Security & Firewall Devices Experts

phil

Level 2 Expert

567 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Symantec Network Security and Firewall Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...