Question about Eten Glofiish X500 GPS Pocket PC

2 Answers

Strat up problem

Hi all,

i just got a glofiish of ebay. I insert my sim card and turned it on and its asking for an password? :(.

Full message:
"Serveral incorrect passwords have been entered. to continue password entry enter 'a1b2c3'. In case of emergency enter an emergency phone number"

The ebayer told me he hasnt set up any passwords on it so there for im not sure what the hell is going on.

Please anyone help please.!!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Visit www.pdaviet.com and download a cooked ROM. I suggest version 3 (V3)
Unzip the ROM to an SD card. The SD card must be formatted in FAT16 not FAT32.

Make sure you have a FULL CHARGED BATTERY!
Unzip the cooked rom file you donwloaded from pdaviet and copy it to main (root) directory of your SD card.
Insert the SD card into your glofiish, hold the Record, Camera and Power button at the same time and while holding them, press the reset button and then release the reset button, continue to hold other buttons untill you see the USB download screen.
Let it do its job, it will be finished when it says.. not connected.

Removed back cover, remove battery for few seconds, replace both and then power up.

Done!

Posted on Apr 15, 2008

It looks like you're unit is locked to the carrier (similar to cell phones). You'd have to get an unlock code that will allow you to place any SIM card inside you're unit.

There are usually vendors that will do it for a nominal fee.

Hope it helps,
cHiPz.

Posted on Mar 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock my samsung instincts\ sph m800


Hi, You can unlock a Samsung Instinct \ M800 safer and easier using unlock code. You can get the unlock code for your mobile from www.simpleunlocking.com/samsung-instinct/rs16wp9/ at low cost.
=================================
UNLOCKING STEPS FOR SAMSUNG M800
=================================
Method 1:

1 - Switch ON your Samsung Instinct with a NOT ACCEPTED SIM Card.
2 - Samsung Instinct will ask for "Password".
3 - Enter the Unlock Code.

OR (if the Samsung Instinct shows "Insert Correct SIM Card")

Method 2:

1 - Switch ON your Samsung Instinct with a NOT ACCEPTED SIM Card.
2 - Don't bother about what's being displayed on your Samsung Instinct.
3 - Compose : #0111*CODE#.

Oct 11, 2012 | Samsung Sprint Instinct Sph M800 Android...

1 Answer

I have a black berry 8100 that gives me an error message of invalid sim card. I need to find someone who has an unlock code.


What carrier is this phone locked to and what sim card are you inserting? You can buy an unlock code on ebay
http://shop.ebay.com/i.html?_nkw=blackberry+8100+unlock+code&_sacat=0&_dmpt=PDA_Accessories&_odkw=Samsung+SGH-A877+digitizer&_osacat=0&_trksid=p3286.c0.m270.l1313

Jun 10, 2010 | RIM BlackBerry Pearl 8100

1 Answer

I bought a sidekick 08 off ebay and i went to t mobile and i got my prepaid minutes and i just got home and now i turn on the phone for like the 50th time so far and now it says sign in but it has the...


1. Remove the battery and the SIM card from the device.
2. Flip the sidekick open; press and hold the letter 'r' on the keypad.
3. While holding the letter 'r', place the battery back in the device. DO NOT INSERT THE SIM CARD YET.
4. The sidekick will restart itself twice. Please make sure not to let the letter 'r' go until it has fully rebooted.
5. Once it has fully rebooted, remove the battery, re-insert the SIM card and battery and power up the device.
6. Once the device has fully rebooted, all prior information should be erased from the device and it should be restored back to the default factory settings

Mar 11, 2010 | T-Mobile Sidekick II

1 Answer

IT SAY SIM LOCK AND ASKING THE CODE


This may not work on all Samsung phones!
THIS IS THE TEMP UNLOCK CODE FOR A SAMSUNG PHONE
Do this at your own risk:
Instructions
Press *#06# and write down your IMEI
Unlock Codes
Code 1: *2767*688 then your IMEI and then press #
For example *2767*688352708000828246# (Everything before the / for C225)
Code 2: *0141#
Code 3: 00000000 (8 zero's)
Entering the Codes
1. Switch your phone off. Remove the original SIM card 2. Insert another SIM card from an alternative network. Power up your phone. You should now see the "Wrong Card" message. 3. Type Code 1 into your phone, if this is entered correctly your
phone screen should now turn black and reboot itself. (C225 doesn't go
black but does reboot) 4. After the phone reboots the SIM card will be recognized and your
SIM will work. Be patient while your phone reboots and DO NOT press
any keys. At this point the phone is "Temporarily" unlocked.
5. Now at your idle screen type in Code 2 (*0141#) and hit the call button.
This should give you a message saying the phone is "Personalized". 6. Power off the phone and insert the original SIM, then power up. 7. At the SIM code prompt, it will ask you to enter a password. At
this stage enter Code 3. 8. After entering hit "OK" and your phone should complete initialization.

[/b]Instructions[/b]
Press *#06# and write down your IMEI
Unlock Codes
Code 1: *2767*688 then your IMEI and then press #
For example *2767*688352708000828246# (Everything before the / for C225)
Code 2: *0141#
Code 3: 00000000 (8 zero's)
Entering the Codes
1. Switch your phone off. Remove the original SIM card 2. Insert another SIM card from an alternative network. Power up your
phone. You should now see the "Wrong Card" message. 3. Type Code 1 into your phone, if this is entered correctly your
phone screen should now turn black and reboot itself. (C225 doesn't go
black but does reboot) 4. After the phone reboots the SIM card will be recognized and your
SIM will work. Be patient while your phone reboots and DO NOT press
any keys. At this point the phone is "Temporarily" unlocked. 5. Now at your idle screen type in Code 2 (*0141#) and hit the call button.
This should give you a message saying the phone is "Personalized". 6. Power off the phone and insert the original SIM, then power up.

7. At the SIM code prompt, it will ask you to enter a password. At
this stage enter Code 3.

8. After entering hit "OK" and your phone should complete initialization.

Your phone is now Permanently unlocked.

Another easy way is you put in a foreign sim put in the code *2767*2878# much easier and works just the same.


*2767*688 <your IMEI number>

Jan 09, 2010 | Samsung SGH-X820 Phone

3 Answers

I need the unlocking code for samsung u600 phone


Try 000, 0000, 111 or 1111.


Please rate FixYa!

Jan 13, 2009 | Samsung SGH-U600

1 Answer

Glofiish X600


power button (not the reset button) and the right soft key. Do not release right soft key until you get prompted for a "yes" or "no"

Dec 21, 2008 | PDAs

1 Answer

Help!! blackberry 7290


cantact your network provider and ask for a sim update and a gprs install message this may solve the prob.
also check the message centre number is in the phone correctly, goto message settings and message centre number, insert the correct one from below save it and then you should be able to send messages.


Network operator SMS Centre Number
O2 (Was BT Cellnet / Genie mobile) +447802000332 (contract)
+447802092035 (pay as you go)
Alt: +447802000334
T-Mobile (was One2One) +447958879879
Orange +447973100973
Alt: +447973100974
Vodafone +447785016005
Tesco Mobile +447802092035
Virgin +447958879890
3 / Three +447782000800

May 25, 2008 | RIM BlackBerry 7290

3 Answers

Sim Card lock to Samsung phone


the phone need to re format the software .. you just need a technician to re programmed the unit.. so that all the original file or data be reseted

Mar 28, 2008 | Samsung SGH-U600

1 Answer

Glofiish X600


I believed someone had entered too much inccorect passwords so it totally locked. You probably try a Hard Reset to bring the unit back to default setting but you may loose some data in it. To perform hard reset just hold the power button and reset button with your stylus at the same time and push.

Feb 27, 2008 | Eten Glofiish X500 GPS Pocket PC

2 Answers

Phone code


The phone code locks your t830 to the inserted SIM card, if you change the SIM the unit asks for this code. If you don't know the code (ebay?) there are three possibilities:
1. ask the formerly owner for the key
2. insert the "old" SIM-Card and delete the key in the phone-settings-menu by pressing "forgot code" and entering only the SIM-Card-Code
3. send your device to FSC with your bill (ebay?)

KICK YOURSELF OR THE EBAY-SELLER FOR FORGETTING SECURITY-CODES!

Dec 14, 2007 | Fujitsu Siemens Pocket LOOX T830...

Not finding what you are looking for?
Eten Glofiish X500 GPS Pocket PC Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eten PDAs Experts

k24674

Level 3 Expert

7987 Answers

kakima

Level 3 Expert

96612 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Eten PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...