An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert who has written 20 answers of more than 400 characters.
Re: the camera on my k750i wont work ?
Your camera either had bad camera cable or camera itself. You may need to replace new part but I suggest to check all connection before determine whether the camera is bad or not. Email me at email@example.com for detailed disassembly guide.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have broken the switch for the camera, this is
common when chaining cases, you will need to replace the camera flex
cable but when this is being fitted you should open the camera slide
(on the case) when fitting as this minimizes the risk of crushing the
What you are seeing is a generic stuck lens error message, turning off the camera and turning it on again will not fix the lens unfortunately.
lens needs to be cleaned or repaired, and if it cant be repaired it
needs to be replaced. There are online places that will do it for a
decent price and there are others that overcharge by way too much.
Fixya rules prevent me from giving you a link to anything off Fixya that would help you fix your camera.
1-connect ur mobile with your PC. 2-open the file manager 3-then open pictures 4-now the folder which camera photos save delete that folder 5-n make new folder n give that same name to this folder (which named folder u hv deleted)
ok.under the lens cover there is a small switch which may lose it's place.
to find it remove the batterry cover , remove the two screws on the body of lens cover,then remove the rear cover (plastic and metal-one body) and you''ll find the tiny switch.Put it in a right place to work when lens cover open.
It sounds like Something got in the mech,Take a Hair dryer and not for a long time maybe 10 sec heat up the lense area keep pushing Power on till it opens,Once it opens,Clean the Area with Denatured Alcahol Hope this Helps ttech
If debris like sand or dirt get into the mechanism which closes that cover it will jam shut. Try gently placing something pointy in the gap between the two blades of the cover. Do not force them apart, if this is going to work they should free with very little pressure. Be very careful not to touch the lens especially if you are using something metal to separate the cover.
Advance Camera Repair