Question about Linksys Wireless-G WRT54G Router

1 Answer

Internet connection Every time I get to the last step in the setup installation, it says it doesn't detect a internet conncection.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

First of u do conntect router to pc throu lan cable then
go in router confngartion manu router defolt ip is 192.168.1.1
just type in your web page on a adress bar then the configre ur router & User name & pass of ur router is admin admin just put in it & configre its is en

Posted on Feb 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot get ps3 hooked up gives me dns errors


Manually configure the DNS in your PS3 to use OpenDNS' servers:

208.67.222.222
208.67.220.220

Jul 06, 2011 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

I try make wifi my router from xfinity but i cant


Hi,

Improve the Fixya.com experience for everyone by voting!

The solution I'm suggesting works in my business (LAN installations) about 95% of the time. I trust that it will work for you.

Let's see if I can help you.

Begin by turning on your computer and your router

? Make sure your service provider has activated your account and services on the subscribed line. Please check with your service provider to confirm this.
? Make sure that you are using the latest drivers. You can download the latest driver from Driver Downloads Database.
? Make sure that you have entered the right username and password (case-sensitive) as given by your service provider. For example, in Australia: user@bigpond; in NZ: user.name.xadsl@xtra.co.nz.
? Open Internet Explorer;
? Click on 'Tools';
? Click on 'Internet Options';
? Click on 'Connections';
? Click on 'Setup'
? Click on 'I want to set up my Internet connections manually . . .';
? Click on 'Next';
? Click on 'I connect through a local area network (LAN);
? Clock on 'Next'
? Click on 'Next' [This is not an error];
? Click on 'No';
? Click on 'Next';
? Click on 'To connect to the Internet immediately . . .; and,
? Click on 'Finish'.

That should have you online. However, if it doesn't get you connected, do the following: Click on tools again. Click on 'Diagnose Connection Problems' and follow the instructions.

The last choice is to use the Setup Wizard. It seldom works for me but you might have more luck than poor me. Here are the instructions:

The Connect to the Internet wizard will guide you through the steps of setting up an Internet connection.

Open the Connect to the Internet wizard by:

• Clicking the Start button Picture of the Start button
• Click on Control Panel.
• In the search box, type network,
• Click "Network and Sharing Center"
• Click Set up a new connection or network
• Then double-click "Connect to the Internet".



All the best

Ben

Jul 03, 2011 | Routers

1 Answer

I have a Belkin F5D8236-4 Router. I have two laptops but one is connected with RJ-45 and not wireless, the other one is connected wireless. I wanted to share files using this router. But I cannot find one...


Hi,

Improve the Fixya.com experience for everyone by voting!

The solution I'm suggesting works in my business (LAN installations) about 95% of the time. I trust that it will work for you.

Let's see if I can help you.

Begin by turning on your computers and your router

? Make sure that you are using the latest drivers. You can download the latest driver/firmware from Driver Downloads Database.user.name.xadsl@xtra.co.nz.
? Open Internet Explorer on the computer that you cannot see;
? Click on 'Tools';
? Click on 'Internet Options';
? Click on 'Connections';
? Click on 'Setup'
? Click on 'I want to set up my Internet connections manually . . .';
? Click on 'Next';
? Click on 'I connect through a local area network (LAN);
? Clock on 'Next'
? Click on 'Next' [This is not an error];
? Click on 'No';
? Click on 'Next';
? Click on 'To connect to the Internet immediately . . .; and,
? Click on 'Finish'.

That should have you online. However, if it doesn't get you on line, do the following: Click on tools again. Click on 'Diagnose Connection Problems' and follow the instructions.

The last choice is to use the Setup Wizard. It seldom works for me but you might more luck than poor me. Here are the instructions:

The Connect to the Internet wizard will guide you through the steps of setting up an Internet connection.

Open the Connect to the Internet wizard by:

• Clicking the Start button Picture of the Start button
• Click on Control Panel.
• In the search box, type network,
• Click "Network and Sharing Center"
• Click Set up a new connection or network
• Then double-click "Connect to the Internet".



All the best

Ben

Jun 18, 2011 | Routers

1 Answer

I have wireless internet but cant get a connection. I put the password in and still tells me unable to connect to the internet and to choose internet settings and then confirm and the same thing keeps...


Have you tried going to control panel, find wireless network setup wizard. Follow steps to setup
for the router you are using.
Also, check internet properties on explorer , connections tab. should use automatatically detect settings.

Feb 10, 2011 | Routers

1 Answer

Linksys will not connect correctly to my laptop


Try a new setup.
On your computer, insert the supplied Setup CD that came with your Router. Setup should start automatically.

NOTE: If setup doesn't load automatically, please click here.

The first screen greets you with the Software End User License Agreement. Please take a moment to read through and understand the agreement. Once you're ready, go ahead and click Next.

kb21463-001_en.png

NOTE: The Linksys Wireless-N Router model displayed on the setup screen may vary based on the Linksys Wireless-N Router model you have.
Step 4:
On the next window, please follow the on-screen instructions on how to connect your Linksys Wireless-N Router:
kb21463-002_en.png Plug one end of the power cable into your router and the other end into an electrical outlet.

NOTE: The Linksys E3000 features a power switch, located at the back-end of the unit, next to the power port. Please make sure that this switch is ON. Other Router models may not have this feature.

kb21463-003_en.png
kb21463-004_en.png Plug the Internet cable into the yellow port in the back of your router labeled "Internet". Plug the other end into the modem.
QUICK TIP: Click Show me how for an illustrated guide on how to complete the above instructions.
After completing the above steps, click Next to continue.

kb21463-005_en.png
Step 5:
Setup will now perform a series of tests to determine the optimum configurations for your network. You may notice your computer connecting and disconnecting to a wireless network several times. This is normal. Your wireless network is simply being secured.
NOTE: The setup process automatically generates a unique and secure Wireless Network Name (SSID) for your convenience.

kb21463-006_en.png Step 6:
The next part of the setup automatically detects your Internet connection type. If you are using a DSL connection, you may be requested to enter your account details. If this is the case, simply enter your Account name and Password in the allocated fields. Otherwise, you may skip ahead to Step 7.
NOTE: If you don't know your Account name and Password, your Internet Service Provider (ISP) will be able to provide these details.

QUICK TIP: Click Examples to see what your Account name should look like.

kb21463-007_en.png NOTE: Cable Internet users will not see the above screen.
Step 7:
Sit back and wait a moment as setup finalizes your Linksys Wireless-N Router settings, and re-establishes your Internet connection.

kb21463-008_en.png Step 8:
Once your Internet connection is up and running, a confirmation window similar to the screenshot below will appear on your screen. Your Linksys Wireless-N Router is now secure and connected to the Internet. This concludes the setup process. Click OK to continue.

kb21463-009_en.png
Step 9:
You will now be taken to the main Cisco Connect window which lets you manage and further personalize your network settings. If you would like to learn more about the available features in Cisco Connect, please click here. Otherwise, you may click on the Close button to exit Cisco Connect, and begin surfing the Internet right away.
NOTE: To launch Cisco Connect again at later time, on a Windows computer, go to Start>All Programs>Cisco Connect. To launch Cisco Connect on a Mac computer, navigate to the Applications folder in Go, and then start Cisco Connect. For more help on this, please click here.

kb21463-010_en.png NOTE: Cisco Connect is automatically installed each time you use the Setup CD or Easy Setup Key to setup or connect to your Linksys Wireless-N Router.

Nov 02, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Set up with Mac G-5 and RCA by Thomson digital Broadband modem will not connect through Netger WGr614 Wireless Router


For Set-Up Procedure follow these steps:-
1)Connect the Modem to the Internet port of the NETGEAR router and the computer to any of the four LAN ports.
2)Open an Internet Explorer browser and type the router IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Ente
The Login window will prompt for the router configuration username and password.
The default username is “admin” and
the default password is “password”
3)Click Setup Wizard on the top left corner, Select Yes for the Setup Wizard to detect the type of internet connection and click Next.
4)The Setup Wizard will detect the type of Internet connection. For Cable Internet connections, Setup Wizard will detect Dynamic IP. Click Next
5)You do not have to change the default settings unless your ISP has given you specific DNS information which must be configured so smiply without changing anything click apply.
6)The router will now save these settings. When complete, you can verify whether you are connected to the internet from the Router Status > Maintenance menu.
7)Under Router Status you will have Internet Port , If you have the Ip Address Under Internet port you will have the wired connectivity then.

Link:-http://kb.netgear.com/app/answers/detail/a_id/119

Wireless Connectivity Steps:-
On the left hand side you will have the blue/purple column in their under the category you set-up you will see a sub-title wireless setting's, left click on that option and then do the setting's.This link will guide you how to do that:-
http://kb.netgear.com/app/answers/detail/a_id/112/related/1

Steps for Wireless Connectivity on MAC:-
1)Click on the apple icon on the left hand side of the start screen and go to system preferences.
2)Under system preferences a category name internet and network select the title network from there.
3)Under Network you will have an option for airport to turn it ON so do that and then below you will see list of networks available , from that list select the network you created , enter the password if it's secure one and you will be good to go from ther on and will have an internet access.

Nov 19, 2009 | NetGear WGR614 Wireless Router

1 Answer

I am trying to install a Netgear WGR614v9 router. Disk will not install it, so tried a manual install. Shut down all firewalls, used no passwords or security settings. It keeps throwing me back to the...


The router needs to be configured manually. Follow the steps below.

Basic DSL Setup - PPPoE

Most Internet Service Providers offer PPPoE authentication. Please consult your ISP if you are not sure if PPPoE could be used.

To configure your router for PPPoE you will need to set your router's WAN (INTERNET) port to 'PPPoE' option. However majority of Modems nowadays already have PPPoE enabled. If your modem has PPPoE client built-in, you need to select the 'DHCP' option in your router. The router is set to this option by default.

Configuration steps:

Step 1

Connect the broadband modem to the WAN (INTERNET) port of your router. If the modem has USB connection make sure that it is NOT connected to any computers via the USB cable and that the modem is switched to Ethernet (not USB). Only the modem's Ethernet port should be connected to the router's WAN (INTERNET) port.
Connect your computer(s) to the router's LAN port(s) or establish connection to it wirelessly.

Step 2

Open your Internet Explorer and log into your router by typing in its IP address (in most cases the default IP is http://192.168.1.1 ). Note that you do not have to be on the Internet in order to access this address because you are just connecting to your router's address. Specify username and password for your router, the default is `admin' (optional) and password is blank (nothing). Or password is admin also.

Step 3

After logging into the router select Setup. Set Internet Connection to 'PPPoE' option.
This can be done by either clicking on Internet Connection Setup Wizard or if you want to set it up manually, then click on 'Manual Internet Connection Setup'. Note that it is very common for broadband modems to carry out the PPPoE authentication for you. In this case you need to select the 'Dynamic IP' option (DHCP) in your router, do not select PPPoE. If you have such modem proceed to Step 5

Step 4

If your broadband modem does not have PPPoE function, select the 'PPPoE' option in the router and enter your account details (username and password given by your ISP). Note that some ISP's require username to be as your full e-mail address (ex: username@ispname.com).

Step 5

Click on SAVE SETTINGS and then on REBOOT THE DEVICE to apply the new configuration. Recycle power to modem.

You do not have to run any login client (like PPPoE) on your computer in order to connect to the Internet. If you had it setup when using the modem without the router, disable it in Internet Explorer under Tools > Internet Options > Connections > set to 'Never dial a connection'.

If you did not have to run PPPoE login client on your computer when modem was directly connected to your PC, your ADSL modem has PPPoE built-in. In this case set the router's WAN (INTERNET) port should be set to the 'Dynamic IP' option.

If your ISP requires PPPoA connection you need to make sure that your ADSL modem supports PPPoA (PPPoA can not be used on Routers which do not have ADSL Modem built-in). If your modem will be carrying out PPPoA connection you need to set your router's WAN (INTERNET) port to the 'DHCP' option.


If you are having difficulties accessing the Internet:

- Turn the modem and the router off for a minute and then turn the modem first and then the router.

- Log into the router and go to Status page. Note what IP address it is getting on the WAN (INTERNET) interface. If the IP address you see under WAN (INTERNET) appears to be in the same range you are using on your network (e.g. 192.168.0.x), you will need to change the range you are using on your LAN to something different, e.g. 192.168.88.x. You can do this on your router under Setup > LAN Setup. Note that after changing the IP of your router you will only be able to access it through its new IP, e.g. 192.168.88.1.

- Select the MAC Cloning option. Click on Clone MAC Address button. Do this from the computer which the broadband modem was directly connected to the last time. This will place the MAC address of your computer into the router. Save settings and reboot the router. Reboot your broadband modem as well.

- Uninstall your antivirus software (sometimes disabling or closing the software is not enough) and reboot your PC.







Configuring router for Cable Internet

To configure your router for Cable you will need to set your router's WAN (INTERNET) port to 'Dynamic IP' (DHCP) option. The router is set to this option by default.

Configuration steps:

Step 1 Connect the cable modem to the WAN (INTERNET) port of your router. If the modem has USB connection make sure that it is NOT connected to any computers via the USB cable and that the modem is switched to Ethernet (not USB). Only the modem's Ethernet port should be connected to the router's WAN (INTERNET) port.
Connect your computer(s) to the router's LAN port(s) or establish connection to it wirelessly.

Step 2 Open your Internet Explorer and log into your router by typing in its IP address (in most cases the default IP is http://192.168.1.1 ). Note that you do not have to be on the Internet in order to access this address because you are just connecting to your router's address. Specify username and password for your router, default is `admin' and password is blank (nothing). Or password is admin as well.

Step 3 After logging into the router select Setup. Set Internet Connection to 'Dynamic IP (DHCP)' option.
This can be done by either clicking on Internet Connection Setup Wizard or if you want to set it up manually, then click on 'Manual Internet Connection Setup'.

Step 4 Click on SAVE SETTINGS and then on REBOOT THE DEVICE to apply the new configuration.

If you are having difficulties accessing the Internet, you need to:

- Select the MAC Cloning option. Click on Clone MAC Address button. Do this from the computer which the cable modem was directly connected to the last time. This will place the MAC address of your computer into the router. Save settings and reboot the router. Reboot your cable modem as well.

- Log into the router and go to Status page. Note what IP address it is getting on the WAN (INTERNET) interface. If the IP address you see under WAN (INTERNET) appears to be in the same range you are using on your network (e.g. 192.168.0.x), you will need to change the range you are using on your LAN to something different, e.g. 192.168.88.x. You can do this on your router under Setup > LAN Setup. Note that after changing the IP of your router you will only be able to access it through its new IP, e.g. 192.168.88.1.

- Uninstall your antivirus/firewall software (sometimes disabling or closing the software is not enough) and reboot your PC. After establishing the Internet connection through the router, reinstall your antivirus/firewall software.

Oct 06, 2009 | NetGear WGR614 Wireless Router

2 Answers

I have hooked it up as the instructions state but it will not find the internet, I am useing a hp laptop and am trying to go wireless, it is the vista system


No its not your windows system, try to check again your wireless router if the software firmware are installed properly in your PC. Also to configure it and connect your internet provider to the Router, which is automatically create its own Protocol Address or Obtain Address, even on Wireless connection. This is basic on Wireless Router to connect on the internet. Good luck!

Aug 04, 2009 | Linksys Wireless-N WRT150N Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...