Question about Barebone Systems

1 Answer

Double sided printing

I have just got the accessory for my HP officejet pro K5400 so I can do double sided printing. When I print a powerpoint presentation handout with 4 slides to a page double sided it prints each page upside down therefore I cannot bind the presentation as the pages are upside down, I run a Mac

Posted by on

  • carterbird Feb 27, 2008

    I have done all this and still it prints upside down.  I have looked on other sites and it appears is not just me, if that is the case then what is the point of the duplexer???!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 589 Answers

There should be a setting in the 2-sided properties for binding orientation.

For a MAC, do this:

On the File menu, click Print.
Open the Two-Sided Printing panel.
Select the option to print on both sides.
Select the binding orientation by clicking the appropriate icon.
Change any other settings, and then click Print.

Posted on Feb 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I no longer have my manual, how do I change the ink cartridges for the HP Officejet 6300 all-in-one?


To replace the print cartridges
1. Make sure the HP All-in-One is on.
Caution If the HP All-in-One is off when you open the print cartridge door
to access the print cartridges, the HP All-in-One will not release the
cartridges for changing. You might damage the HP All-in-One if the print
cartridges are not docked safely on the right side when you try to remove
them.
2. Open the print cartridge door.
The print carriage moves to the far right side of the HP All-in-One.
3. Wait until the print carriage is idle and silent, and then lightly press down on a
print cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black or photo print cartridge, remove the print cartridge
from the slot on the right.
4. Pull the print cartridge toward you out of its slot.
5. If you are removing the black print cartridge in order to install the photo print
cartridge, store the black print cartridge in the print cartridge protector or an
airtight plastic container.
If you are removing the print cartridge because it is low or out of ink, recycle the
print cartridge. The HP Inkjet Supplies Recycling Program is available in many
countries/regions, and lets you recycle used print cartridges free of charge. For
more information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html
6. Remove the new print cartridge from its packaging and, being careful to touch
only the black plastic, gently remove the plastic tape by using the pink pull tab.
7. Slide the new print cartridge forward into the empty slot. Then gently push on the
upper part of the print cartridge forward until it clicks into the socket.
If you are installing the tri-color print cartridge, slide it into the left slot.
If you are installing a black or photo print cartridge, slide it into the right slot.
8. Close the print cartridge door
9. If you installed a new print cartridge, the print cartridge alignment process begins.
10. Make sure you have plain paper loaded in the input tray, and then press OK.
11. The HP All-in-One aligns the print cartridges. Recycle or discard the print
cartridge alignment sheet.
12. Press OK.

Jul 17, 2011 | Barebone Systems

1 Answer

HP 7280 two-sided printing instructions


I just got off a live chat with a HP tech, Seems the 7280 prints double sided from a file only. It WILL NOT copy a double sided document loaded into the document feeder, or onto the scanner. Bummer. However 7280 is still a fine printer, and I have owned it since first hit the market, more than a year ago.

Mar 25, 2008 | Barebone Systems

1 Answer

Lexmark image studio


I had the same problem.This worked for me.
Insert the disk
When the install window appears click cancel
click Start>My Computer>
Right click on the drive with the disk in, and Open
Open Applications (left double click)
Open LaunchPad (left double click)
Double click the icon LXCRlpx
Go back to Applications and double click on Set Up (the disc icon) from there and then follow the install instructions.
This worked for me, I hope it does for you.


Mar 24, 2008 | Barebone Systems

1 Answer

I HAVE A HP OFFICEJET


when you go to print click on the Preferences button ,in there it should give you the option to fit to page ,or option to print at a %. you may have to hunt around for it depending on what o/s you are using

hope this helps
Terry

Mar 14, 2008 | Barebone Systems

1 Answer

How do i cancel a print in queue? thanx


Depends on your operating system. Start > settings >printers. Or Start printers and faxes. Find your printer and double click to open. Select printer job and right click to get to delete/clear or go to the printer menu and cancel all print jobs. Another way is to turn printer off for about 20 minutes to clear its memory.

Mar 10, 2008 | Barebone Systems

1 Answer

HP Officejet Pro problem


Hi, try this.
go into My computer/ Locate The Disk In the Drive D:-/E:-/F:- et,c.
right click, open/open folder to View.
Locate a file towards the Bottom, installshield Wizard Or setup.exe. or similar, try launching the program from there.
If it does,nt work, or still gives you incompatability warnings, Try START/RUN/DRIVE D:- E:- et,c setup.exe.
If none of the above work, contact hewlett packard customer services for an updated driver, via thier website.
Mike @ Compurepair.

Feb 25, 2008 | Barebone Systems

1 Answer

Can't print in colour


Hi Paddy,
It sounds like the color ink cartridge is clogged. You can try taking the color cartridge out, and take a paper towel and some windex with amonia. Spray the paper towel with the windex and then take the color cartridge, and wipe the bottom of the ink cartridge. After wiping the bottom of the cartridge, try pressing on the bottom of the cartridge (Print head) with the paper towel...You should start seeing some ink soaking into the paper towel. If you do not see any ink on the paper towel, then try wiping it again with the windex/paper towel. If after a couple tries, you can not get the ink to flow from the print head, then I would suggest getting a new cartridge.
The HP ink cartridges can get a bit tricky and the print heads will clog when the printer is left sitting for a long period of time.
Hope this helps.
Good luck.
If you have any other questions, feel free to post them.
IF I have helped answer your question, please remember to leave a feedback and or rating for my suggestion.
Mac =)

Feb 13, 2008 | Barebone Systems

2 Answers

Canon 5700 how do you cancel print jobs once started.


usually there is an icon that will pop up in task bar by clock double click it and the click cancel

Feb 06, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...