Question about D-Link DFE-530TX+ Ethernet ED100W Network Adapter

1 Answer

Lan Problem i have installed two lan card in my PC 1st lan card is on DHCP 2nd is on Static IP i have share 2nd lan card for internet use in other pc on my network. lan is working fine but internet is not working so what should i have to do ?? on that pc internet working fine witch has two lan card

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

Goto control panel and work your way through the network Set-up Wizard.
If this is not a separte Icon in control panel then look under "network Connection" Icon.

Posted on Feb 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I Have 3 PC's. 2 desk tops and 1 laptop. My desktops were working fine but laptop wont load internet. It says it connects to M10 router but cant find internet. Reset everything and tried again, Same...


Title: Can not access internet by other laptop

Open control Panel and go to Network and Internet Connection.

Open it and select Network Connection

After that you see your networks , select and Right Click on it and go to Advance Tab

In Advance tab you just see a option like "Allow me to share my network"

Click on that option , apply and ok


After that 1 dektop connected with another by LAN and Laptop connected with 2nd desktop By use of LAN cable

it call Series Connection.Like--1st desktop--->2nd Desktop--->Laptop

Otherwise Bring a HUB and You can access internet

Now you can access internet on both laptops

May 07, 2011 | Cisco Valet Wireless Hotspot (M10)

Tip

IP Conflicts in a work place


An IP address conflict occurs when two computers on a LAN or the Internet have been assigned the same IP. IP conflicts between two computers normally render either one or both of them unusable for network operations.

How IP Address Conflicts Happen

Two computers can acquire conflicting IP addresses in any of several ways:

· A system administrator assigns two computers on the LAN the same Static IP Address.

· A system administrator assigns a computer a static IP address within the local network's DHCP range (dynamic IP range), and the same address is automatically assigned by the LAN DHCP server.

· A malfunction in the network's DHCP server allows the same dynamic address to automatically be assigned to multiple computers.

· An ISP accidentally assigns two customers the same IP address (either statically or dynamically).

· A mobile computer is put into standby / hibernate mode and then awakened later.

Note that other forms of IP conflicts can also occur on a network. For example, one computer may experience an IP address conflict with itself if that computer is configured with multiple Network Adapters. System administrators may also create IP conflicts by accidentally connecting two ports of a network switch or router to each other.

Recognizing IP Address Conflicts

On most Microsoft Windows computers, if you attempt to set a fixed (static) IP address that is already active on the local network, you will receive the following pop-up error message:

The static IP address that was just configured is already in use on the network. Please reconfigure a different IP address.

On newer Microsoft Windows computers having dynamic IP conflicts, you should receive a balloon error message in the Taskbar as soon as the operating system detects the issue:

There is an IP address conflict with another system on the network.

Sometimes, especially on older Windows computers, a message similar to the following may instead appear in a pop-up window:

The system has detected a conflict for IP address...

On Mac or Linux computers, a similar message will normally appear on screen.

Resolving IP Address Conflicts

Try the following remedies for IP conflicts:

1. For networks where IP addresses are fixed (statically assigned), ensure each local host is configured with a unique IP address.

2. If your computer has a dynamically assigned address, releasing and renewing its IP address can workaround IP address conflicts.
3. If your home router is believed to have a faulty DHCP server causing IP conflicts on the home network, upgrading the router firmware may resolve this problem.

on Nov 24, 2010 | Network & Wireless Adapters

1 Answer

How do i set up 2 IPs on my system so they dont clash??


The best way is to use two different NIC's (network interface cards) in one machine.
After you install the second NIC card plug a cable into it also so you will have two different cable connected to your router. If you are using DHCP it will pick up an available IP so you won't have any conflict with the first NIC card. If you want to set them up with static IP's open the properties of the first one and copy them exactly except for the IP address. Just give the second card the next number.
Example:
1st card: 192.168.1.100
2nd card: 192.168.1.101
Use the same Subnet, Gateway, DNS 1&2 and if your WINS is setup on card one use the same also.

Mar 23, 2010 | Network & Wireless Adapters

1 Answer

Limited or no connectivity


hi
just follow these steps

right click on my computer & click properties>> go to hardware>> device manager>> click on network adepters>> select your ethernet card (lan card) right click on it. select the option uninstall >> a window will show that r u sure u want to delete this driver click yes over there. then on the top of the device manager window click on action >>select scan for hardware changes. in a just a few sec the system will reinstall the driver for ur lan card. it will start working fine. in case if it doesn't work u have to use the static ip in ur lan card. for that just go to control panel>> click on network connection>> right click on network adepter>> click properties >> select internet protocol version 4 TCP/IP then click on properties >> put the dot on use the following ip address then type the ip the ip address (like these 192.168.0.2 ) on ip address on subnet mask it will be 255.255.255.0 on default gateway it will be ur routers ip address (like 192.168.0.1) on dns use the routers ip address again then just hit ok there u go ur problem is solved.

Regards
www.fixmypcandmac.com

Mar 31, 2009 | Acer Network & Wireless Adapters

1 Answer

LAN internet connection problem in COMPAQ V 3000 notebook


Just connect the lan cable from the modem port saying "DataIn" to your laptop, select Automaticaly detect IP setting and let it assign via DHCP. Once it gains the ip (usually 3-4 minutes) use any java enabled browser (like ie,mozilla firefox) and go to any site it will automatically redirect you to Tata Indicom login terminal and fill in the required blanks and you are connected to the internet.

Jan 19, 2009 | Compaq Network adapter

1 Answer

Logged off


The LAN should not ever log off but either you are talking about the Internet, which can, microwave devices (ovens, wireless phones) that intermittently interfere or dynamic ip addressing cycles that assign you the 169.xxx.xx.x from within Windows attention deficit disorder manager. You can assure static assignments of ip addresses for your LAN (write down the ip address and default gateway when you are logged on to see what they should be) or log on to your router (Start>Run> type http://192.168.1.1 for Linksys, user name linksys, password is admin and you can configure your LAN and WAN. Select DHCP for cable modems, PPPoE for DSL or STATIC for ensuring LAN ip address assignments. ~Steve

Oct 17, 2008 | Linksys WUSB100 Wireless Adapter

1 Answer

IP Conflict


use static ip higher than the dhcp range so dhcp doesnt assign it to other pc causing ip conflict .. rename computers on network. imaging can cause this issue as the master image can have same comp name assigning it same ip.

Jun 06, 2008 | ParkerVision Signal Max USB1500 1 Mile USB...

1 Answer

2 Eth Cards one for Internet & one for LAN


First of all, I would really recommend you to buy a Cable/DSL router. It is quite cheap, usualy more secure, much easier to configure and troubleshoot. Also, it does not require to have one PC up and running all the time, hense saving energy. Do you know that a PC running 24/7 may cost between 60$ and 100$ in electricity annually? This is more than the cost of a basic router!

But, since your question is about sharing your Internet connection with a PC, here are some guidelines. I will assume here that you are using Windows XP.

On PC1:
1. Connect the modem to Eth0 in the PC. Do not connect anything in the USB port of the modem.
2. Make sure that the link lights are lit both side. If they are not, you may need a cross-over cable (this is usualy not the case)
3. Configure Eth0 to get IP address DNS automatically
4. Disable (uncheck) all protocols except TCP/IP on Eth0.
5. Run the Network Setup Wizard (Start > All Programs > Accessories > Communications > Network Setup Wizard) and follow the steps.

On PC2:
Simply run the Network Setup Wizard (Start > All Programs > Accessories > Communications > Network Setup Wizard) and follow the steps. Specify and you Internet connection is through a Home or LAN network.

That should do it.

Apr 25, 2008 | Network & Wireless Adapters

3 Answers

My laptop cannot connect to my local network (LAN)


Assuming you initially set up the router using the wired lan adapter and lead, enabled DHCP in the settings. First stand right next to your router; Dells wireless is a little tempremental, go to control panel and in there should be Dell wireless monitor, open this up refresh it and see if it finds any wireless networks, if so try to connect. Dissable your wired network lan adapter. Go to the properties of your wireless card and on the TCP/IP line click properties again and ensure that obtain an ip address automatically is selected, press ok and restart the pc.

Sep 20, 2007 | Dell 1470 (W9284) 802.11a/g/b Wireless...

1 Answer

Connected on Wireless but unable to connect on Internet


If not done allready, setup the lan IP address and default gateway in win98 Click MyComputer-ControlPanel-Network-Double Click TCP/IP Adapter for your 3com device-insert LAN info for IP Adress-subnet mask, Gateway and your Internet service providors DNS Addresses info Tab's (3x different Tabs "IP Adress" "Gateway" "DNS Configuration") IP Adress will be at least one number higher than your gateway address and not allready being used by other PC's on your network and gateway address will same as your router interface address subnet mask will be the same for all PC's on your network. For 3com and Netgear routers LAN setup is usually Gateway = 192.168.1.1 Subnet Mask = 255.255.255.0 IP Adress = 192.168.1.10(choose alternate number than 10 if allready used by another PC on your network, try to use round numbers, must be a number higher than 1) Once all info is entered click OK (this may trigger a database info update message and task)now your LAN is setup and ready to talk to your network Restart PC and try browsing again. May possibly require reinstallation of the TCP/IP client (you double clicked this to setup your LAN in Win98) or reinstallation of the IIS(Internet Information Services)component found in, Add/Remove Programs-Add/Remove windows components and then try LAN setup again if this does not work first time round

May 06, 2007 | 3Com OfficeConnect Wireless 11g 802.11g/b...

Not finding what you are looking for?
D-Link DFE-530TX+ Ethernet ED100W Network Adapter Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Network & Wireless Adapters Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Are you a D-Link Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...