Question about Canon PIXMA MP600 all-In-One InkJet Printer

2 Answers

Error code 6502 on MP510

I was in the middle of a print and it just suddenly stopped and "Error
Code 6502" appeared on the screen. The orange light flashes 19 times. The cartridges are genuine ink cartridges. Have tried the: Turn off, reset carriage to right, turn on holding button & press reset (& tried OK button) twice, release power and press reset 4 times. This does not work! Have tried with the top left open when pressing the buttons and with it shut. Nothing changes. Please help me - I'm sick of buying printers and throwing them within 6 months to 12 months. Thanks

Posted by on

  • 5 more comments 
  • Anonymous Mar 07, 2008

    service error 6502

  • gfitzy Apr 24, 2008

    canon printer mp600 has error message 6502,have tried,holding down reset button, then off/on button at the same time, then pressing reset button twice, while still holding down on/off button down, then let both buttons go.

    then press reset button four times. when printer stops movement turn off printer. the operation don't work.

    can someone give me a solution that will work please.

  • MattyZ May 28, 2008

    I have a Canon iP4500 and have received the same service error 6502 message. I have tried the listed solution to no avail. This is getting frustrating. I've only had this printer for one month.

  • mrutowski197 Dec 23, 2008

    i have a 6502 error on my mp600 all in one printer how do i fix it

  • Anonymous Feb 21, 2009

    I have a canon mp 510 printer/scanner/copier and it come up with a error 6502 jsut after i had replaced the ink cartridge. I came to this site to look for a soloution. I turned the printer off and left it off for a few minutes turned it back on and it is now working. My problem was eaisly fixed, hope the rest of you have the same outcome

  • Anonymous Mar 21, 2009

    CODE 6502 ON MP 510 PROBLEM

  • hjvr May 11, 2010

    I bought a Canon Pixma MP 510 printer in april 2007 in Holland.

    Now I have error 6502 as described by several others. I tried the procedure to unplug the printer for at least 15 minutes but it did not work.

    Now I have to send it to Canon but the 1 year guarantee lasted till april 2008 only. Having noticed that several users seem to have the same problem, I would expect free service from Canon. This is disappointing as the inkcassettes are expensive with a very moderate life. My canon photocopier and digital camera, however are ok. Regards hjvanrumpt@yahoo.com

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Why error 6502..........?????
Help me pls.........!!!!!!!!!!!

Posted on Jun 12, 2008

Canon help desk told to unplug the printer for at least 15 minutes. The electronics will reset. If the error persists after turning the printer back on you're screwed and have to send it to Canon, because some electronic component is broken.

Posted on Jun 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Changed ink cartridge and now have error 6502 - have no clue what that means, but it won't print - yellow and green light alternate flashing


Error Code 6502 appears generally after changing a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Feb 12, 2011 | Canon PIXMA iP3500 Printer

1 Answer

Canon MP510 wont print. Error message B300 or


May I know the exact error messages in the printer screen. If it's green and yellow lights that are flashing you need to push more the two cartridges that you replace....also try to clean it using the printer program installed in your computer....good luck and hope it will help....

Mar 31, 2010 | Canon PIXMA MP510 All-In-One InkJet...

1 Answer

Canon pixma ip4300 Stoped working, light flashes 19 times and error code 6502 displayed on screen Help please?


Hello
Try
Error Code 6502 appears generally after chaging a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

All Best: Pineworks

Oct 31, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Error code 6502


That error says it's a ink tank position error, make sure there are no paper scraps in the paper path, and you might clean the encoder strip with a q-tip and water. Make sure the carriage can move freely from one side to the other.

Aug 09, 2009 | Canon PIXMA MP510 All-In-One InkJet...

1 Answer

When printer is turned on error code 6502 comes on screen


Error Code 6502 appears generally after chaging a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

All Best: Pineworks

May 05, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Have error 6502 on my mp510 printer this has happened since i replace the ink cartridge, can any one help this is driving me crazy


Try may work
Error Code 6502 appears generally after chaging a cartridge.

Solution:
  1. Unplug the printer.
  2. Remove the faulty Cartridge
  3. Plug in the printer and press and hold power button
  4. Keep it held down. Press Resume twice, and this should reset the fault.

All Best: Pineworks

Mar 30, 2009 | Canon PIXMA IP5200 InkJet Photo Printer

1 Answer

Canon PIXMA MP500 - "Error Code 6502"


Try holding the stop/reset button down for 10 seconds to see if the error clears. If it does not repost your error message to the forum.

Jan 28, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Error code


Click the link for Cannon:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&modelid=13800#SupportDetailAct
Under Please enter your question:
Type in error code 6502 Click Search
Click number 1
ERROR LCD: Error code (5xxx through 9xxx) appears on the display

Feb 17, 2008 | Canon PIXMA MP600 all-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

2,922 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...