Question about Samsung SYNC SGH-A707 Cellular Phone

2 Answers

Bluetooth remove bluetooth from sync 707 to install a motorola H700 bluetooth how to do?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cannot instal e bluetooth h700 to the telephone sgh-a707c

Posted on Dec 03, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

Removing the bluetooth is as simple as this:

menu, settings, connectivity, bluetooth, my devices, press down to get to the device you want to delete, press options, then delete.

h700:

menu, settings, connectivity, bluetooth, my devices, (should have at the top: search for new devices scrolling). Click that:

h700 bluetooth should be in pairing mode:

hold the center button down and wait for it to turn solid blue: the go back and search for new devices on the phone, when it finds the bluetooth, enter 4 0000 zeros for the passcode. The click if you want it to automatically connect or not.

Your done!

Clint Cartee

Posted on Feb 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know the bluetooth pairing code for sanyo M1


Well I know for sure the default pin for the M1 is indeed 0000. However I cannot tell you what the pin would be for your specific bluetooth dongle. If I where you I would try 0000, 1111, 2222 and so on
  • As with all Bluetooth headsets, the H700 needs to be paired with the device before it can be used, which is done in pairing mode. In pairing mode, the H700 makes a transmission so that Bluetooth-enabled devices can pick up the device and connect to the headset. Once connected, no other device can connect with the Bluetooth headset. To enter pairing mode on the H700, open the headset boom located near the microphone. After a few seconds the indicator light will turn purple. Once purple, the H700 is in pairing mode.
Searching for the Device With the M1
  • Once the H700 is in pairing mode, have the M1 search for Bluetooth devices. To do this, press "MENU/OK" and choose "Tools," "Bluetooth," "Add New" and "Search." A list of Bluetooth devices will show up on the screen. Highlight "Motorola H700" and press "MENU/OK." Choose "Add to Trusted," enter "0000" and press "MENU/OK." The devices are now connected and ready to be tested.
Testing the Devices
  • Once the devices are connected, test that both the phone and the headset are working properly together. First, place the headset in your ear. Dial a number on the phone and press "Send." If you can hear ringing, the devices are connected properly and ready for use.
    If the connection was not successful, repeat the previous steps and try again. Make sure the indicator light is glowing purple and is steady. If you have connected the headset to a previous device, make sure that device is turned off so as not to interfere with the connection procedure. Once the other device is off, close and reopen the boom to enter pairing mode.

Feb 16, 2012 | Sanyo Cell Phones

1 Answer

I need the pairing code and how to operate a Motorola H700 Bluetooth


You can get the manual on how to pair and use the bluetooth on the link below.

http://www.motorola.com/mdirect/manuals/QG-H700_9499A88O.pdf

Good Luck

Nov 29, 2010 | Cell Phones

1 Answer

How do i connect motorola h700 bluetooth to my nokia n95..am not able to pair it even after several attempts


i would like to transfer my bluetooth H700 to my new phone blackberry bold phone.

Sep 29, 2009 | Nokia N95 Cellular Phone

1 Answer

How do I send pictures from my samsung A-707 cell phone to my home computer ?


You could do that in so many ways, either by using a usb cord or through bluetooth. if the images are in your memory card, you can also use a card reader to copy directly to your pc.

Sep 19, 2009 | Samsung SYNC SGH-A707 Cellular Phone

2 Answers

Activating the buetooth function.


You have to "pair" your bluetooth device with your phone. This is just a fancy way of saying "sync" with each other. Check your bluetooth headset instructions on how to do this.

I am using a Motorola H700 Bluetooth Headset. To "pair" it with my phone I have to hold down the call button on the actual bluetooth headset itself while the headset is turned off. This puts the headset in "pairing" mode so its ready to detect any phone that wants to sync with it.

Then I have to go to my actual LG CU400 and enable bluetooth settings. Next, go to "Device List" settings and select "new". The phone will scan for the headset. Once the phone detects the headset it will request a numercial passcode. Your bluetooth headset instructions should list this passcode. Enter the passcode and the phone and headset are now connected! I hope this helps. Good Luck!

Jan 05, 2009 | LG CU400 Cellular Phone

3 Answers

H 700 motorola headset bluetooth setup


you have to do switch off device when you want to do off the light.
light show the activate mode of headset.


Apr 20, 2008 | Cell Phones

3 Answers

Bluetooth link busy


how can i get my h700 bluetooth to stop saying bluetooth link busy ?

Nov 10, 2007 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Samsung SYNC SGH-A707 Cellular Phone Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cell Phones Experts

Steve

Level 3 Expert

3287 Answers

Yoav Shilon
Yoav Shilon

Level 2 Expert

101 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Samsung Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...